BJPFB - RM-139A

  • MSDS: BJPFB
  • Manufacturer: MOBIL OIL CORP
  • Product Name: RM-139A
  • National Stock Number: 9150-00-681-5999
Product Identification

Product ID:RM-139A
MSDS Date:04/27/1989
FSC:9150
NIIN:00-681-5999
MSDS Number: BJPFB

Responsible Party
MOBIL OIL CORP
150 E 42ND ST
NEW YORK, NY 10017-5612
US

Emergency Phone: 212-883-4411

Info Phone: 703-849-3265

Cage: 1E969

Contractor
MOBIL OIL CORP, NORTH AMERICAS MARKETING AND REFINING
FAIRFAX, VA 22037 US

Telephone: 800-662-4525/ 856-224-4644

Cage: 3U728

Ingredients

TRICRESYLPHOSPHATE

CAS: 1330-78-5

RTECS: TD0175000

Fraction By Weight: 3%


SYNETHETIC OILS

Fraction By Weight: >90%

OSHA PEL 5 MG/M3 (OIL MIST)

ACGIH TLV: 5 MG/M3 (OIL MIST)


ADDITIVES AND OTHER INGREDIENTS

Fraction By Weight: <5%

Hazards

LD50 LC50 Mixture:ORAL LD50 (RAT) IS >15 G/KG ESTIMATED
Routes of Entry: Inhalation:NO Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:THIS PRODUCT CONTAINS TRICRESYL
PHOSPHATE. OVEREXPOSURE BY INGESTION MAY PRODUCE NERVOUS SYSTEM
DISORDERS INCLUDING GASTROINTESTINAL DISTURBANCES, NUMBNESS,
MUSCULAR CRAMPS AND WEAKNESS. THESE EFFECTS MAY BE DELAYED.
PROLONGED OR REPEATED SKIN CONTACT HAS PRODUCED INHIBITION OF
CHOLINESTERASES IN ANIMALS.
Explanation of Carcinogenicity:THE COMPONENTS OF THIS PRODUCT HAVE NOT
SHOWN ANY EVIDENCE OF BEING CARCINOGENIC.
Effects of Overexposure:THIS PRODUCT CONTAINS TRICRESYL PHOSPHATE.
OVEREXPOSURE BY INGESTION MAY PRODUCE NERVOUS SYSTEM DISORDERS
INCLUDING GASTROINTESTINAL DISTURBANCES, NUMBNESS, MUSCULAR CRAMPS
AND WEAKNESS. THESE EFFECTS MAY BE DELAYED. PROLONGED OR REPEATED
SKIN CONTACT HAS PRODUCED INHIBITION OF CHOLINESTERASES IN ANIMALS.
Medical Cond Aggravated by Exposure:PERSONS WITH A SKIN OR NERVOUS
SYSTEM DISORDERS SHOULD USE CAUTION WHEN HANDLING OR USING THIS
PRODUCT.

First Aid

First Aid:EYES: FLUSH WITH RUNNING WATER FOR 15 MINUTES WHILE HOLDING
EYELID. GET MEDICAL ATTENTION IMMEDIATELY. SKIN: WASH WITH WATER.
REMOVE CONTAMINATED CLOTHING. GET MEDICAL ATTENTION. INHALATION:
REMOVE TO FRESH AIR. GIVE MOUTH-TO-MOUTH RESUSCITATION IF NOT
BREATHING. GET MEDICAL ATTENTION. INGESTION: IF CONSCIOUS, INDUCE
VOMITING AND GIVE 1 GLASS OF WATER TO DRINK. GET MEDICAL ATTENTION
IMMEDIATELY.

Fire Fighting

Flash Point Method:PMCC
Flash Point:500F,260C
Lower Limits:0.6
Upper Limits:7.0
Extinguishing Media:USE WATER FOG, CARBON DIOXIDE, FOAM, OR DRY
CHEMICAL.
Fire Fighting Procedures:WEAR FIRE FIGHTING PROTECTIVE EQUIPMENT AND
FULL FACE-PIECE SELF-CONTAINED BREATHING APPARATUS. COOL FIRE
EXPOSED CONTAINERS WITH WATER SPRAY. CONTAIN RUNOFF.
Unusual Fire/Explosion Hazard:WATER OR FOAM MAY CAUSE FROTHING.

Accidental Release

Spill Release Procedures:CONTAIN SPILL IMMEDIATELY. DO NOT ALLOW SPILL
TO ENTER SEWERS OR WATERCOURSES, REMOVE ALL SOURCES OF IGNITION.
ABSORB WITH APPROPRIATE INERT MATERIAL SUCH AS SAND, CLAY, ETC.
LARGE SPILLS MAY BE PICKE D UP USING VACUUM PUMPS, SHOVELS,
BUCKETS, ETC.

Handling

Handling and Storage Precautions:DO NOT TRANSFER TO UNMARKED
CONTAINERS. STORE IN CLOSED CONTAINERS AWAY FROM HEAT, SPARKS, OPEN
FLAME, OR OXIDIZING MATERIALS. COMBUSTIBLE LIQUID.
Other Precautions:DO NOT USE ON FOOD PROCESSING MACHINERY.

Exposure Controls

Respiratory Protection:USE NIOSH/MSHA APPROVED ORGANIC VAPOR RESPIRATOR
WITH A DUST AND MIST FILTER WHEN MIST CONCENTRATIONS EXCEED
SUGGESTED EXPOSURE LIMITS. PROTECTION IS NOT REQUIRED UNDER NORMAL
USE CONDITIONS.
Ventilation:USE LOCAL EXHAUST IF OIL MISTS EXCEED THE WORKPLACE
AIRBORNE CONCENTRATION OF 5MG/M3.
Protective Gloves:IMPERVIOUS SYNTHETIC RUBBER IF REQUIRED.
Eye Protection:USE CHEMICAL SAFETY GOGGLES AS REQUIRED.
Other Protective Equipment:FOR PROLONGED OR REPEATED EXPOSURES, USE
IMPERVIOUS SYNTHETIC RUBBER CLOTHING (BOOTS, APRONS, ETC.).
Work Hygienic Practices:WASH THOROUGHLY BEFORE EATING OR SMOKING. KEEP
AWAY FROM FEED OR FOOD PRODUCTS. DO NOT USE ON FOOD PROCESSING
MACHINERY.
Supplemental Safety and Health
THE UNUSED PRODUCT IS NOT SPECIFICALLY LISTED BY THE EPA AS A HAZARDOUS
WASTE; DOES NOT EXHIBIT THE HAZARDOUS CHARACTERISTICS OF
IGNITABILITY, CORROSIVITY, OR REACXTIVITY, AND IS NOT FORMULATED
WITH T HE METALS CITED IN THE EP TOXICITY TEST. HOWEVER, USED
PRODUCT MAY BE REGULATED.

Chemical Properties

HCC:V6
Boiling Pt:B.P. Text:>600F,>316C
Decomp Temp:Decomp Text:>500F,>260C
Vapor Pres:<0.1
Spec Gravity:1.003
Viscosity:130 SUS @100F
Solubility in Water:NEGLIGIBLE
Appearance and Odor:AMBER COLORED OIL. MILD ODOR.
Percent Volatiles by Volume:0

Stability

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS
Stability Condition to Avoid:EXTREME HEAT
Hazardous Decomposition Products:CARBON MONOXIDE

Disposal

Waste Disposal Methods:PRODUCT MAY BE BURNED IN AN APPROVED INCINERATOR
FOR FUEL VALUE OR DISPOSAL IN ACCORDANCE WITH ALL APPLICABLE LOCAL,
STATE AND FEDERAL REGULATIONS. PRODUCT IS SUITABLE FOR PROCESSING
BY AN APPROVED RE CYCLING FACILITY.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.