BJQTL - CS 3300 TYPE I CLASS A PART A
- MSDS: BJQTL
- Manufacturer: FLAMEMASTER CORP
- Product Name: CS 3300 TYPE I CLASS A PART A
- National Stock Number: 8030-00-584-4399
Product Identification
Product ID:CS 3300 TYPE I CLASS A PART A
MSDS Date:10/02/1989
FSC:8030
NIIN:00-584-4399
Kit Part:Y
MSDS Number: BJQTL
Responsible Party
SUN VALLEY, CA 91352
US
Emergency Phone: 800-424-9300 (CHEM TREC)
Info Phone: 818-982-1650
Cage: 14439
Contractor
Telephone: 818-982-1650
Cage: 14439
Ingredients
METHYL ETHYL KETONE (2-BUTANONE) (MEK) (SARA III)
CAS: 78-93-3
RTECS: EL6475000
OSHA PEL 200 PPM/300 STEL
ACGIH TLV: 200 PPM/300STEL 9192
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
Hazards
Routes of Entry: Inhalation:NO Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:MAY CAUSE EYE, SKIN AND NOSE
IRRITATION. MAY LEAD TO MUSCULAR WEAKNESS AND DIZZINESS. LONG TERM
EXPOSURE MAY LEAD TO DERMATITIS, LIVER AND KIDNEY DAMAGE.
Effects of Overexposure:EYE, NOSE OR SKIN IRRITATION. HEADACHE AND
NAUSEA WITH IMPAIRED COORDINATION.
Medical Cond Aggravated by Exposure:PRE-EXISTING SKIN DISORDERS,
RESPIRATORY TRACT, LIVER OR KIDNEY DISEASE.
First Aid
First Aid:EYE CONTACT-FLUSH IMMEDIATELY WITH LARGE AMOUNTS OF WATER,
CONTACT PHYSICIAN. SKIN-WASH WITH MILD SOAP AND WATER.
Fire Fighting
Flash Point Method:TCC
Flash Point:90.0F,32.2C
Lower Limits:1.97
Upper Limits:11.00
Extinguishing Media:DRY CHEMICAL, FOAM, CO2, WATER.
Fire Fighting Procedures:IN CONFINED AREAS USE SELF-CONTAINED BREATHING
APPARATUS.
Unusual Fire/Explosion Hazard:VAPORS ARE HEAVIER THAN AIR AND CAN
TRAVEL TO SOURCES OF IGNITION.
Accidental Release
Spill Release Procedures:REMOVE IGNITION SOURCES. TRANSFER TO SAFETY
CONTAINER. CLEAN UP REMAINDER WITH SAND OR SWEEPING COMPOUND. WASH
AREA WITH SOAP AND WATER.
Handling
Handling and Storage Precautions:STORE IN COOL, WELL-VENTILATED AREA.
GROUND CONTAINERS WHEN FILLING OR EMPTYING.
Other Precautions:WASH HANDS BEFORE EATING, DRINKING OR SMOKING, AFTER
HANDLING THIS PRODUCT.
Exposure Controls
Respiratory Protection:FOR VAPORS ABOVE 200 PPM NEED SELF-CONTAINED
BREATHING APPARATUS.
Ventilation:LOCAL EXHAUST: HOOD. MECHANICAL: FAN.
Protective Gloves:RUBBER
Eye Protection:SAFETY GLASSES AND GOGGLES.
Other Protective Equipment:APPROPRIATE TO PREVENT PROLONGED CONTACT
WITH SKIN.
Work Hygienic Practices:TRAIN PERSONNEL IN SAFE HANDLING OF THIS
PRODUCT.
Supplemental Safety and Health
KEY1:F4
Chemical Properties
HCC:F4
Boiling Pt:B.P. Text:176F,80C
Vapor Pres:78
Vapor Density:2.41
Spec Gravity:1.33
Evaporation Rate & Reference:5.7
Solubility in Water:SLIGHT
Appearance and Odor:PINK PASTE, POLYSULFIDE ODOR
Stability
Stability Indicator/Materials to Avoid:YES
AVOID STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:HIGH HEAT OR OPEN FLAME.
Hazardous Decomposition Products:SO2, CO2, H2S, SOOT, CO.
Disposal
Waste Disposal Methods:REACT WITH CURING AGENT AND DISPOSE AS SOLID
HAZARDOUS WASTE ACCORDING TO FEDERAL, STATE AND LOCAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.