BJRTP - COATING, EPOXY-POLYAMIDE CLEAR, COMP 2

  • MSDS: BJRTP
  • Manufacturer: STRATHMORE PRODUCTS INC
  • Product Name: COATING, EPOXY-POLYAMIDE CLEAR, COMP 2
  • National Stock Number: 8010-01-248-2994
Product Identification

Product ID:COATING, EPOXY-POLYAMIDE CLEAR, COMP 2
MSDS Date:12/28/1990
FSC:8010
NIIN:01-248-2994
Kit Part:Y
MSDS Number: BJRTP

Responsible Party
STRATHMORE PRODUCTS INC
1970 WEST FAYETTE STREET
SYRACUSE, NY 13201
US

Emergency Phone: 315-488-5401; 315-476-4766

Info Phone: 315-488-5401

Cage: GO043

Contractor
STRATHMORE PRODUCTS INC
151 SYRACUSE, NY 13201 US

Telephone: (315) 488-5401 OR (315) 476-4766

Cage: GO043

Ingredients

TOLUENE (SARA III)

CAS: 108-88-3

RTECS: XS5250000

Fraction By Weight: 15 - 20%

OSHA PEL 200 PPM/150 STEL

ACGIH TLV: 50 PPM; 9293

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS


N-BUTYL ALCOHOL (SARA III)

CAS: 71-36-3

RTECS: EO1400000

Fraction By Weight: 15%

OSHA PEL 100 PPM

ACGIH TLV: S, C 50 PPM; 9293

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS


ETHYL ACETATE (SARA III)

CAS: 141-78-6

RTECS: AH5425000

Fraction By Weight: 29%

OSHA PEL 400 PPM

ACGIH TLV: 400 PPM; 9192

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS


N-BUTYL ACETATE (SARA III)

CAS: 123-86-4

RTECS: AF7350000

Fraction By Weight: 19%

OSHA PEL 150 PPM/200 STEL

ACGIH TLV: 150 PPM/200STEL;9192

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS


2-BUTOXYETHANOL

CAS: 111-76-2

RTECS: KJ8575000

Fraction By Weight: 2%

OSHA PEL S, 50 PPM

ACGIH TLV: S, 25 PPM; 9293


FROM HEAT,SPARKS,OPEN FLAME.USE ONLY W/ADEQ

RTECS: 9999999ZZ


EMPTY CNTNRS MAY CONTN PROD RESIDUE INCL FLAMM/EXPLO

RTECS: 9999999ZZ


WARNINGS MUST BE OBSERVED UNTIL THE CNTNR HAS BEEN CLEANED

RTECS: 9999999ZZ


CELLOSOLVE HAS CAUSED REPRO DISORDERS IN LAB ANIM &

RTECS: 9999999ZZ


HMNS.INGEST OF LG QTY MAY RSLT IN RED BLOOD CELL

RTECS: 9999999ZZ


THE CNS & CAUSE RESP IRRI, & MAY CAUSE LIVER & KIDNEY DMG.A

RTECS: 9999999ZZ


EXTREM HIGH LVLS TO XYLENE & TOLUENE.RPTS HAVE ASSOC

RTECS: 9999999ZZ


INTENTIONAL MISUSE BY DELIB CONC & INHAL CONTENTS MAY BE

RTECS: 9999999ZZ


THROUGH SKIN. RPTD/PRLNG SKIN CONT MAY CAUSE DRYING &

RTECS: 9999999ZZ

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:(ACUTE) INHAL OF VAPS/SPRAY MISTS CAN
CAUSE IRRI OF RESP TRACT/ACUTE NERV SYS DEPRESS CHARACTERIZED BY
HDCH,DIZZ,STAG GAIT,CONFUSN,UNCON/COMA.OVEREXP CAN CAUSE EYE & SKIN
IRRI.EYE CONT W/LIQ MAY CAUSE SEV IRRI.INGEST:MAY BE HARMFUL IF
SWALLOWED.CAN CAUSE GI IRRIT, NAUS, DIARR & POSS VOMIT. ASPIR (SEE
EFTS OVEREXPOSURE)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZ: IN LUNGS CAN CAUSE PNEUMIT WHICH CAN
BE FATAL. BUTYL CELLOSOLVE (2-BUTOXYETHANOL) IN UNDILUTED FORM IS
MODERATELY TOXIC IF INGESTED & WILL PENETRATE SKIN READILY.
FREQ/WIDESPREAD CONT MAY RS LT IN THE ABSORPTION OF POTENTIALLY
HARMFUL AMTS OF MATL. BUTYL CELLOSOLVE HAS BEEN KNOWN TO INCREASE
(SEE SUPP DATA)
Medical Cond Aggravated by Exposure:PREEXISTING SKIN, EYE, AND
RESPIRATORY DISORDERS.

First Aid

First Aid:INHAL: REMOVE TO FRESH AIR. IF BRTHG STOPPED, GIVE
MOUTH-TO-MOUTH RESUSCITATION & KEEP WARM & QUIET. IF BRTHG DFCLT,
GIVE OXYGEN. GET MD IMMED. EYES: FLUSH IMMED WITH COPIOUS QTYS OF
WATER FOR 15 MIN & TAKE TO MD FOR DEFINITIVE MED TRTMT. SKIN:
REMOVE CONTAM CLTHG & WASH AFFECTED AREA WITH SOAP & WATER. IF
IRRIT PERSISTS, SEE MD. INGEST: DO NOT INDUCE VOMITING. CALL MD OR
POIS CTL CTR IMMED.

Fire Fighting

Flash Point Method:SCC
Flash Point:34.0F,1.1C
Lower Limits:SEE INGRED
Extinguishing Media:DRY CHEMICAL, CO*2, OR WATER SPRAY
Fire Fighting Procedures:WEAR NIOSH/MSHA APPRVD SCBA AND FULL PROT
EQUIP. REMOVE SOURCES OF IGNIT. USE WATER TO COOL UNRUPTURED CLOSED
CNTNRS TO PVNT PRESS BUILDUP AND (SEE SUPP DATA)
Unusual Fire/Explosion Hazard:KEEP CNTNRS TIGHTLY CLOSED. ISOLATE FROM
HEAT, ELEC EQUIP, SPARKS, OPEN FLAME. CLOSED CNTNRS MAY EXPLODE
WHEN EXPOSED TO EXTREME HEAT. DO NOT APPLY TO HOT SURF.

Accidental Release

Spill Release Procedures:REMOVE ALL SOURCES OF IGNIT (FLAMES, HOT
SURFACES & ELEC, STATIC/FRICTION SPARKS). AVOID BRTHG VAPS. VENT
AREA. REMOVE W/ INERT ABSORB & NON-SPARKING TOOLS. TRANSFER TO
APPROP CNTNR FOR DISP. KEEP OUT OF SEWERS, STORM DRAINS, SURFACE
WATER& SOIL.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:DO NOT STORE ABOVE 120F. STORE LG QTYS
IN BLDG DESIGNED & PROT FOR STOR OF NFPA CLASS 1B FLAMM LIQS.
Other Precautions:CNTNRS SHOULD BE GROUNDED WHEN POURING. AVOID FREE
FALL OF LIQ IN EXCESS OF A FEW INCHES. DO NOT FLAME CUT, BRAZE OR
WELD WITHOUT NIOSH/MSHA APPRVD RESP OR APPROP VENT. WARNING: FLAMM.
VAP HARMFUL. MA Y CAUSE IRRIT. KEEP AWAY (SEE INGRED 06)

Exposure Controls

Respiratory Protection:OUTDOOR/OPEN AREAS: NIOSH/MSHA APPRVD MECH
FILTER RESP TO REMOVE SOLID AIRBORNE PARTICLES OF OVERSPRAY.
RESTRICTED VENT AREAS: CHEM-MECH FILTERS TO REMOVE A COMBINATION OF
PARTICULATE & VAP. CONFINED AREAS: AIR LINE TYPE RESP OR HOODS.
Ventilation:GEN DILUTION/LOCAL EXHST VENT IN VOL & PATTERN TO KEEP
TLV/LEL < LIM & REMOVE DECOMP PRODS DURING WELDING/FLAME CUTTING.
Protective Gloves:SOLVENT RESISTANT
Eye Protection:CHEMICAL WORKERS GOGGLES
Other Protective Equipment:PREVENT PROLONGED SKIN CONTACT TO
CONTAMINATED CLOTHING.
Work Hygienic Practices:WASH HANDS FREQUENTLY AND THOROUGHLY DURING
CONTACT WITH MATERIAL AND AT END OF WORK SHIFT.
Supplemental Safety and Health
FIRE FIGHT PROC: POSS AUTO-IGNIT/EXPLN WHEN EXPOSED TO EXTREME HEAT.
FOG NOZZLES PREFERRED IF WATER IS USED. EFTS OF OVEREXP: THE
OSMOTIC FRAGILITY OF THE BLOOD CELLS IN SOME LAB ANIMALS. IN
HUMANS, E VEN AT EXPOS LVLS AS HIGH AS 200 PPM, THESE BLOOD EFTS
DID NOT OCCUR AT ALL. NIOSH STUDIES INDICATE BUTYL(SEE INGRED 09)

Chemical Properties

Boiling Pt:B.P. Text:175F,79C
Vapor Pres:SEE INGRED
Vapor Density:>AIR
Spec Gravity:0.89
Evaporation Rate & Reference:SLOWER THAN ETHER
Appearance and Odor:NONE SPECIFIED BY MANUFACTURER.
Percent Volatiles by Volume:80.7

Stability

Stability Indicator/Materials to Avoid:YES
AVOID STRONG OXIDIZING AGENTS
Stability Condition to Avoid:EXCESSIVE HEAT, SPARKS, OPEN FLAME
Hazardous Decomposition Products:ACRID FUMES, SMOKE AND CARBON MONOXIDE
AND/OR CARBON DIOXIDE

Disposal

Waste Disposal Methods:DISPOSE IN ACCORDANCE WITH LOCAL, STATE AND
FEDERAL REGULATIONS. INCINERATE IN APPROVED FACILITY. DO NOT
INCINERATE CLOSED CONTAINERS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.