BJTRB - EZY-BOND
- MSDS: BJTRB
- Manufacturer: TEXAS INDUSTRIES INC
- Product Name: EZY-BOND
- National Stock Number: 8030-00F014136
Product Identification
Product ID:EZY-BOND
MSDS Date:11/01/1985
FSC:8030
NIIN:00F014136
MSDS Number: BJTRB
Responsible Party
ARLINGTON, TX 76010
Emergency Phone: (214) 637-3100
Info Phone: (214) 637-3100
Cage: 0B3F8
Contractor
Telephone: (214) 637-3100
Cage: 0B3F8
Ingredients
DIBUTYL PHTHALATE (SARA III)
CAS: 84-74-2
RTECS: TI0875000
Fraction By Weight: 3%
OSHA PEL 5 MG/M3
ACGIH TLV: 5 MG/M3; 9192
EPA Report Quantity: 10 LBS
DOT Report Quantity: 10 LBS
Hazards
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:SKIN/EYES: IRRITATION. INHALATION:
RESPIRATORY PASSAGES. INGESTION: HARMFUL.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:SKIN/EYES: IRRITATION. INHALATION: RESPIRATORY
PASSAGES. INGESTION: HARMFUL.
Medical Cond Aggravated by Exposure:SENSITIVE TO COMPONENTS OF THIS
SUBSTANCE MAY SUFFER IRRITATION OF THE SKIN & RESPIRATORY PASSAGES.
First Aid
First Aid:EYES: FLUSH W/LARGE QUANTITIES OF WATER AT LEAST 15 MINS.
SKIN: WASH W/SOAP & PLENTY OF WATER. INHALATION: REMOVE TO FRESH
AIR. IF NOT BREATHING, GIVE ARTIFICIAL RESPIRATION. IF BREATHING IS
DIFFICULT , GIVE OXYGEN. INGESTION: DON'T INDUCE VOMITING. GIVE
LARGE QUANTITIES OF WATER. NEVER GIVE ANYTHING BY MOUTH TO AN
UNCONSCIOUS PERSON. OBTAIN MEDICAL ATTENTION IN ALL CASES.
Fire Fighting
Extinguishing Media:USE WATER SPRAY, CO2, DRY CHEMICAL, ALCOHOL OR
UNIVERSAL FOAMS.
Fire Fighting Procedures:WHEN WATER EVAPORATED, POLYMER CAN BURN &
PRODUCE CO, CO2 & MAY EVOLVE OTHER TOXIC GASES & VAPORS.
Accidental Release
Spill Release Procedures:MAJOR SPILLS SHOULD BE CONTAINED & COLLECTED
FOR DISPOSAL. MINOR SPILLS MAY BE FLUSED W/WATER TO THE SANITARY
SEWER, IF LOCAL REGULATIONS PERMIT.
Handling
Handling and Storage Precautions:KEEP CONTAINER CLOSED TO PREVENT
EVAPORATION.
Other Precautions:NONE
Exposure Controls
Respiratory Protection:NOT REQUIRED UNDER CIRCUMSTANCES OF NORMAL USE.
Ventilation:MECHANICAL ROOM VENTILATION IS EXPECTED TO BE SATISFACTORY.
Protective Gloves:RUBBER, NEOPRENE, PVC
Eye Protection:SAFETY GLASSES, GOGGLES, FACESHIELD
Supplemental Safety and Health
Chemical Properties
Boiling Pt:B.P. Text:212F
Vapor Pres:17.5
Vapor Density:<1
Spec Gravity:1.08
Evaporation Rate & Reference:(BU AC = 1): 1
Solubility in Water:COMPLETE
Appearance and Odor:WHITE, MILKY FLUID; MILD VINEGAR ODOR.
Percent Volatiles by Volume: 70%
Stability
Stability Indicator/Materials to Avoid:YES
NONE
Stability Condition to Avoid:EVAPORATION
Hazardous Decomposition Products:CO, CO2, & TOXIC GASES/VAPORS
Disposal
Waste Disposal Methods:DISPOSE OF IN ACCORDANCE W/LOCAL, STATE, &
FEDERAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.