BJTTL - SIGN FINISHING CLEAR
- MSDS: BJTTL
- Manufacturer: T J RONAN PAINT CORP
- Product Name: SIGN FINISHING CLEAR
- National Stock Number: 8010-00F014208
Product Identification
Product ID:SIGN FINISHING CLEAR
MSDS Date:04/25/1986
FSC:8010
NIIN:00F014208
MSDS Number: BJTTL
Responsible Party
BRONX, NY 10454
Emergency Phone: (212) 292-1100
Info Phone: (212) 292-1100
Cage: FO720
Contractor
Telephone: (212) 292-1100
Cage: FO720
Ingredients
MINERAL SPIRITS, PETROLEUM SPIRITS
CAS: 64475-85-0
RTECS: PY8240000
OSHA PEL 500 PPM
ACGIH TLV: 100 PPM
METHYL ETHYL KETONE (2-BUTANONE) (MEK) (SARA III)
CAS: 78-93-3
RTECS: EL6475000
OSHA PEL 200 PPM/300 STEL
ACGIH TLV: 200 PPM/300STEL 9192
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
COBALT (SARA III)
CAS: 7440-48-4
RTECS: GF8750000
OSHA PEL 0.1 MG/M3;AS CO
ACGIH TLV: 0.05 MG/M3;DUST 9293
Hazards
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHALATION: NOSE/THROAT IRRITATION.
CNS DEPRESSION CHARACTERIZED BY HEADACHE, DIZZINESS, NAUSEA,
STAGGERING GAIT, CONFUSION, UNCONSCIOUSNESS. SKIN: IRRITATION,
DERMATITIS. EYES: IRRITATION, BURNING. I NGESTION: GASTROINTESTINAL
DISTRESS.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:INHALATION: MAY LEAD TO PERMANENT BRAIN DAMAGE
& NEVOUS SYSTEM DAMAGE. SKIN: IRRITATION & DERMATITIS.
First Aid
First Aid:EYES: FLUSH W/PLENTY OF WATER FOR AT LEAST 15 MINS. SKIN:
WASH W/SOAP & WATER. INHALATION: REMOVE TO FRESH AIR. GIVE CPR IF
NEEDED. INGESTION: OBTAIN MEDICAL ATTENTION IN ALL CASES.
Fire Fighting
Flash Point Method:TCC
Flash Point:107F
Lower Limits:1%
Upper Limits:7%
Extinguishing Media:FOAM, CO2, DRY CHEMICAL
Fire Fighting Procedures:USE SELF CONTAINED BREATHING APPARATUS. WATER
MAY BE UNSUITABLE AS EXTINGUISHING MEDIA, BUT HELPFUL IN KEEPING
ADJACENT CONTAINERS COOL.
Unusual Fire/Explosion Hazard:KEEP WORK AREAS FREE OF HOT METAL
SURFACES & KEEP AWAY FROM HEAT, SPARKS & OPEN FLAMES.
Accidental Release
Spill Release Procedures:ELIMINATE ALL HEAT SOURCES, OPEN FLAMES &
OTHER SOURCES OF IGNITION. ABSORB W/SOLID ABSORBENT. SHOVEL INTO
CONTAINERS. IF LARGE QUANTITIES ARE SPILLED PERSONAL PROTECTIVE
EQUIPMENT MAY BE REQUIRED.
Handling
Handling and Storage Precautions:KEEP CONTAINERS CLOSED WHEN NOT IN
USE. KEEP PROPDUCT CONTAINERS COOL, DRY & AWAY FROM SOURCES OF
IGNITION. AVOID INHALATION OF VAPORS.
Other Precautions:USE W/ADEQUATE VENTILATION. AVOID CONTACT W/SKIN.
Exposure Controls
Respiratory Protection:DEPENDS ON VAPOR CONCENTRATION >TLV, USE NIOSH
RESPIRATOR FOR ORGANIC VAPORS
Ventilation:LOCAL EXHAUST: PREFERRED-PAINT SPRAY BOOTH
Protective Gloves:CHEMICAL RESISTANT
Eye Protection:SPLASH GOGGLES, FACE SHIELD
Work Hygienic Practices:WASH SKIN AFTER CONTACT, BEFORE BREAKS & MEALS.
Supplemental Safety and Health
Chemical Properties
Boiling Pt:B.P. Text:313-388F
Vapor Pres:3.0
Vapor Density:3.8-4.9
Spec Gravity:0.779
Evaporation Rate & Reference:(BU AC = 1): 3.0
Solubility in Water:INSOLUBLE
Appearance and Odor:CLEAR & MILD ODOR
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS, STRONG ACIDS, OR BASES & SELECTED AMINES
Stability Condition to Avoid:HOT METAL SURFACES, HEAT, SPARKS, OPEN
FLAMES, SOURCES OF IGNITION.
Hazardous Decomposition Products:COBALT COMPOUNDS, CO, CO2
Disposal
Waste Disposal Methods:DISPOSE OF IN ACCORDANCE W/LOCAL, STATE, &
FEDERAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.