BJVMQ - RED GREASE 21409-10
- MSDS: BJVMQ
- Manufacturer: BOWMAN DISTRIBUTION BARNES GROUP INC
- Product Name: RED GREASE 21409-10
- National Stock Number: 9150-00F014593
Product Identification
Product ID:RED GREASE 21409-10
MSDS Date:06/30/1989
FSC:9150
NIIN:00F014593
MSDS Number: BJVMQ
Responsible Party
CLEVELAND, OH 44103
Emergency Phone: (216) 391-7200
Info Phone: (216) 391-7200
Cage: 05575
Contractor
Telephone: (216) 391-7200
Cage: 05575
Ingredients
PETROLEUM OIL, HYDROTREATED HEAVY NAPHTHENIC DISTILLATE
CAS: 64742-52-5
RTECS: PY8035000
Fraction By Weight: 87.5%
ORGANIC ZINC COMPOUND
Fraction By Weight: 2.25%
ZINC (SARA III)
CAS: 7440-66-6
RTECS: ZG8600000
Fraction By Weight: 0.14%
OSHA PEL 10 MG ZNO/M3
ACGIH TLV: 10 MG ZNO/M3; 9192
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
SOAP
Fraction By Weight: <15%
ADDITIVES
Fraction By Weight: <15%
7.4 LB/GAL
RTECS: 9999999VO
Hazards
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:SKIN/EYES: IRRITATION. IF INJECTED
UNDER SKIN NECROSIS COULD RESULT. INGESTION: POSSIBLE IRRITATION.
INHALATION: LUNG IRRITATION, NAUSEA, & DIARRHEA.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:SKIN/EYES: IRRITATION. IF INJECTED UNDER SKIN
NECROSIS COULD RESULT. INGESTION: POSSIBLE IRRITATION. INHALATIOIN:
LUNG IRRITATION, NAUSEA, & DIARRHEA.
First Aid
First Aid:EYES: FLUSH W/PLENTY OF WATER FOR AT LEAST 15 MINS. SKIN:
WASH THOROUGHLY W/SOAP & WATER. INHALATION: REMOVE TO FRESH AIR.
GIVE CPR OR OXYGEN IF NEEDED. INGESTION: DON'T INDUCE VOMITING.
OBTAIN MEDICA L ATTENTION IN ALL CASES.
Fire Fighting
Extinguishing Media:CO2, DRY CHEMICAL, FOAM
Fire Fighting Procedures:WATER STREAM MAY SPREAD FIRE, USE WATER SPRAY
ONLY TO COOL CONTAINERS NOT ON FIRE. WEAR A SELF-CONTAINED
BREATHING APPARATUS W/POSITIVE PRESSURE.
Unusual Fire/Explosion Hazard:WILL NOT FLASH SPONTANEOUSLY. MAY IGNITE
IF EXPOSED TO OPEN FLAME.
Accidental Release
Spill Release Procedures:SCOOP UP & PLACE IN METAL CONTAINER. USE INERT
ABSORBENT TO CLEAN RESIDUE & PLACE IN METAL CONTAINER.
Handling
Handling and Storage Precautions:STORE CLEAN & DRY. STORE AT
TEMPERATURES <150F TO PRESERVE FOR INTENDED USE.
Other Precautions:AVOID CONTACT W/EYES.
Exposure Controls
Respiratory Protection:AS REQUIRED
Ventilation:PROVIDE MECHANICAL VENTILATION TO KEEP
Eye Protection:SAFETY GLASSES, GOGGLES, FACESHIELD
Other Protective Equipment:OIL RESISTANT APRON
Supplemental Safety and Health
Chemical Properties
Vapor Density:>1
Spec Gravity:<1
Solubility in Water:NEGLIGIBLE
Appearance and Odor:PASTE, RED GREASE W/PETROLEUM ODOR.
Stability
Stability Indicator/Materials to Avoid:YES
Stability Condition to Avoid:OPEN FLAME, TEMPS >150F
Disposal
Waste Disposal Methods:DISPOSE OF IN ACCORDANCE W/LOCAL, STATE, &
FEDERAL REGULATIONS. UTILIZE PERMITTED INDUSTRIAL WASTE DISPOSAL
SITE & MANIFEST.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.