Product ID:M100 SCREWDRIVER HANDLES
MSDS Date:10/15/1988
FSC:2640
NIIN:00-922-6921
MSDS Number: BJWBN

A & L HANDLES

244 SHOEMAKER ROAD
POTTSTOWN, PA 19463

Emergency Phone: (215) 323-1516

Info Phone: (215) 323-1516

Cage: MO236

PEMCO ADHESIVES

247 AUBURN, IN 46706 US

Telephone: 219-925-3368

Cage: 0PES8

CELLULOSE ACETATE

CAS: 9004-35-7

Fraction By Weight: >60%

DIOCTYL SODIUM SULFOSUCCINATE

CAS: 577-11-7

RTECS: WN0525000

Fraction By Weight: >1%

DIMETHYLPHTHALATE (SARA III)

CAS: 131-11-3

RTECS: TI1575000

Fraction By Weight: <40%

OSHA PEL 5 MG/M3

ACGIH TLV: 5 MG/M3; 9192

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

DIETHYL PHTHALATE (SARA III)

CAS: 84-66-2

RTECS: TI1050000

Fraction By Weight: <40%

OSHA PEL 5 MG/M3

ACGIH TLV: 5 MG/M3; 9192

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHALATION: TRANSIENT IRRITATION TO
THE NOSE & THROAT. EYES: LOW HAZARD FOR USUAL INDUSTRIAL HANDLING.
SKIN: MOLTEN MATERIAL WILL PRODUCE THERMAL BURNS.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:INHALATION: LOW TOXICITY, IRRITATION TO THE
NOSE & THROAT. EYES: LOW HAZARD FOR USUAL INDUSTRIAL HANDLING.
SKIN: MOLTEN MATERIAL WILL PRODUCE THERMAL BURNS. INGREDIENTS
AREN'T HUMAN SKIN IRRITANTS, SE NSITIZERS, OR PHOTOTOXIC AGENTS.
THE POLYMER WILL COME OFF AS HEALING OCCURS.

First Aid:SKIN: IF BURNED BY CONTACT W/MOLTEN MATERIAL COOL AS QUICKLY
AS POSSIBLE W/WATER & SEE PHYSICIAN FOR TREATMENT.

Extinguishing Media:WATER FOG OR SPRAY, DRY CHEMICAL OR CO2
Fire Fighting Procedures:WEAR SELF-CONTAINED BREATHING APPARATUS & FULL
PROTECTIVE CLOTHING. DECOMPOSES >464F.
Unusual Fire/Explosion Hazard:IF THE MATERIAL IS REDUCE TO OR COLLECTED
AS A FINE POWDER, A POTENTIAL MAY EXIST FOR FIRE/DUST EXPLOSION. NO
CLEAR MELTING POINT, SOFTENING POINT >257F.

Spill Release Procedures:MATERIAL IS BIOLOGICALLY INERT. COLLECT &
CONTAINER FOR SALVAGE & DISPOSAL.

Handling and Storage Precautions:AVOID CONTACT W/STRONG OXIDIZING
MATERIALS. MATERIAL ISN'T REGULATED UNDER DOT. SUITABLE CONTAINERS
INCLUDE CARTONS, DRUMS & MULTIWALL PAPER SACKS.

Respiratory Protection:IF DUST IS GENERATED, AN APPROPRIATE
NIOSH-APPROVED RESPIRATOR W/DUST CARTRIDGES SHOULD BE USED. IF
FUMES ARE EVOLVED, USE EITHER AN AIR-PURIFYING RESPIRATOR FOR
ORGANIC VAPORS OR AN ATMOSPHERE-SUPPLY ING RESPIRATOR.
Ventilation:10 AIR CHANGES PER HOUR SHOULD BE SUFFICIENT TO MAINTAINT
TOLERABLE AIRBORNE LEVELS UNDER MOST CIRCUMSTANCES.
Protective Gloves:WORN TO PROTECT AGAINST THERMAL BURNS
Eye Protection:SAFETY GLASSES W/SIDESHIELDS, GOGGLES
Other Protective Equipment:SAFETY SHOWER, EYEBATH.
Work Hygienic Practices:GOOD INDUSTRIAL HYGIENE PRACTICES SHOULD BE
FOLLOWED WHICH INCLUDES MINIMIZING DIRECT CONTACT.
Supplemental Safety and Health
KEY1:N1. THIS ITEM IS PART OF PUNCTURE REPAIR KIT.

HCC:N1
Boiling Pt:B.P. Text:DECOMPOSES
Melt/Freeze Pt:M.P/F.P Text:>257F
Spec Gravity:>1.0
Solubility in Water:INSOLUBLE
Appearance and Odor:SOLID W/LITTLE OR NO ODOR

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS, PUNGENT, IRRITATING ORGANIC ACIDS
Stability Condition to Avoid:TEMPERATURES >257F
Hazardous Decomposition Products:SMOKE, CO, CO2
Conditions to Avoid Polymerization:MAY CAUSE AN EXOTHERMIC REACTION.

Waste Disposal Methods:INCINERATION OR LANDFILL. OBSERVE ALL FEDERAL,
STATE & LOCAL REGULATIONS REGARDING ACCEPTABLE DISPOSAL PRACTICES.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.