BJXLL - ISOPROPYL ALCOHOL,ANHYDROUS
- MSDS: BJXLL
- Manufacturer: EXXON CO USA A DIV OF EXXON CORP
- Product Name: ISOPROPYL ALCOHOL,ANHYDROUS
- National Stock Number: 6810-00-286-5435
Product Identification
Product ID:ISOPROPYL ALCOHOL,ANHYDROUS
MSDS Date:11/07/1989
FSC:6810
NIIN:00-286-5435
MSDS Number: BJXLL
Responsible Party
HOUSTON, TX 77252-2180
US
Emergency Phone: 713-870-6000/713-656-2443
Info Phone: 713-656-5949
Cage: 29700
Contractor
Telephone: 281-870-6000 / 800-726-2015
Cage: 72190
Ingredients
ISOPROPYL ALCOHOL (SARA III)
CAS: 67-63-0
RTECS: NT8050000
Fraction By Weight: 100%
OSHA PEL 400 PPM/500 STEL
ACGIH TLV: 400 PPM/500STEL;9192
Hazards
LD50 LC50 Mixture:ORAL LD50 (RAT) = 5840 MG/KG
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: OVEREXPOSURE MAY LEAD TO CNS
DEPRESSION, LEADING TO HEADACHES AND DIZZINESS. EYE: MAY LEAD TO
IRRITATION AND WILL INJURE EYE TISSUE IF NOT REMOVED PROMPTLY.
SKIN: NO HEALTH HAZARD FROM ABSORPTI ON OR EXPOSURE. INGESTION:
SLIGHT HEALTHHAZARD. CHRONIC: PROLONGED EXPOSURE CAN BE IRRITATING
TO MUCOUS MEMBRANES.
Explanation of Carcinogenicity:THIS CHEMICAL IS NOT LISTED AS HAVING
ANY EVIDENCE OF BEING CARCINOGENIC.
Effects of Overexposure:OVEREXPOSURE MAY LEAD TO DIZZINESS, SHORTNESS
OF BREATH, HEADACHES, VOMITING, DERMATITIS AND EYE IRRITATION
(BURNING AND TEARING). HIGH VAPOR CONCENTRATIONS ARE ANESTHETIC AND
MAY HAVE OTHER CENTRAL N ERVOUS SYSTEM EFFECTS. CHRONIC SKIN
EXPOSURE MAY LEAD TO DEFATTING OF TISSUE AND DERMATITIS.
INGESTION:PULMONARY EDEMA.
Medical Cond Aggravated by Exposure:PERSONS WITH EYE, SKIN, HEART,
RESPIRATORY, OR ANY OTHER MEDICAL CONDITION SHOULD USE CAUTION WHEN
HANDLING OR USING THIS PRODUCT.
First Aid
First Aid:SKIN: REMOVE CONTAMINATED CLOTHING. WASH WITH SOAP AND WATER.
GET MEDICAL ATTENTION AS REQUIRED. INHALATION: IMMEDIATELY REMOVE
VICTIM TO FRESH AIR. GIVE OXYGEN OR ARTIFICIAL RESPIRATION AS
NEEDED. GE T PROMPT MEDICAL ATTENTION. EYE: IMMEDIATELY FLUSH WITH
WATER FOR 20 MINUTES WITH EYELIDS HELD OPEN. GET PROMPT MEDICAL
ATTENTION. INGESTION: GET PROMPT MEDICAL ATTENTION. DO NOT INDUCE
VOMITING.
Fire Fighting
Flash Point Method:TCC
Flash Point:54.0F,12.2C
Autoignition Temp:Autoignition Temp Text:662F
Lower Limits:2
Upper Limits:12
Extinguishing Media:USE WATER FOG, CARBON DIOXIDE, FOAM, OR DRY
CHEMICAL. DO NOT USE A DIRECT STREAM OF WATER.
Fire Fighting Procedures:FIRE FIGHTERS SHOULD USE NIOSH APPROVED SCBA &
FULL PROTECTIVE EQUIPMENT WHEN FIGHTING CHEMICAL FIRE. USE WATER
SPRAY TO COOL NEARBY CONTAINERS EXPOSED TO FIRE.
Unusual Fire/Explosion Hazard:FIRE OR EXCESSIVE HEAT MAY CAUSE
PRODUCTION OF HAZARDOUS DECOMPOSITION PRODUCTS.
Accidental Release
Spill Release Procedures:FIRE HAZARD: ELIMINATE ALL SOURCES OF
IGNITION. EVACUATE AREA. VENTILATE AREA. STOP RELEASE. DIKE TO
CONTAIN SPILL. WEAR PROPER SAFETY EQUIPMENT. IF AMOUNT IS LARGE,
REMOVE LIQUID BY VACUUM. IF SMALL, ABSORB ON INERT MATERIAL.
DISPERSE RESIDUE.
Neutralizing Agent:DILUTE WITH WATER
Handling
Handling and Storage Precautions:STORE IN TIGHTLY CLOSED CONTAINERS
AWAY FROM HEAT, SPARKS, OPEN FLAME & STRONG OXIDIZING AGENTS. EMPTY
CONTAINERS MAY CONTAIN FLAMMABLE VAPOR.
Other Precautions:DO NOT PRESSURIZE, CUT, WELD, BRAZE, SOLDER, DRILL,
GRIND, OR EXPOSE CONTAINERS TO HEAT, FLAME, SPARKS, STATIC
ELECTRICITY, OR OTHER SOURCES OF IGNITION. MATERIAL MAY ATTACK SOME
FORMS OF PLASTIC, ALU MINUM, RUBBER AND COATINGS.
Exposure Controls
Respiratory Protection:USE NIOSH/MSHA APPROVED AIR-PURIFYING OR
SUPPLIED AIR RESPIRATOR AS APPROPRIATE.
Ventilation:MECHANICAL(GENERAL) EXHAUST RECOMMENDED. LOCAL OR EXPLOSION
PROOF VENTILATION MAY BE REQUIRED IN SOME CIRCUMSTANCES.
Protective Gloves:CHEMICAL RESISTANT GLOVES.
Eye Protection:CHEMICAL SPLASH GOGGLES &/OR FACESHIELD
Other Protective Equipment:EYE WASH STATION & SAFETY SHOWERS SHOULD BE
AVAILABLE IN THE IMMEDIATE VICINITY OF ANY POTENTIAL EXPOSURE.
Work Hygienic Practices:WASH HANDS BEFORE EATING, DRINKING, SMOKING, OR
USING TOILET FACILITIES. WASH CONTAMINATED CLOTHING BEFORE REUSE.
Supplemental Safety and Health
AVOID VOMITING IN CASES OF OVEREXPOSURE SINCE ASPIRATION INTO LUNGS IS
A POSSIBLE HAZARD. PROPERLY GROUND LARGER DRUMS OF MATERIAL TO
GUARD AGAINST STATIC ELECTRICITY. PRACTICE GOOD HOUSEKEEPING. PO
ST NO-SMOKING SIGNS. NOTIFY THE NATIONAL RESPONSE CENTER IN CASE
OF SPILLS.
Chemical Properties
HCC:F2
Boiling Pt:=82.2C, 180.F
Melt/Freeze Pt:<0.C, 32.F
Vapor Pres:30 @68F
Vapor Density:2.0
Spec Gravity:0.79
Evaporation Rate & Reference:2.5 (N-BUTYL ACETATE=1)
Solubility in Water:COMPLETE
Appearance and Odor:CLEAR COLORLESS LIQUID, DISTINCT ODOR
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS, CAUSTIC, AMINES, ALDEHYDES, AMMONIA,
CHLORINATED COMPOUNDS, ALKANOLAMINES.
Stability Condition to Avoid:HIGH TEMPERATURES, SPARKS, AND OPEN FLAMES
Hazardous Decomposition Products:INCOMPLETE COMBUSTION MY YIELD CARBON
MONOXIDE AND OTHER TOXIC GASES
Disposal
Waste Disposal Methods:UNUSED MATERIALS WILL BE A LAND-BANNED HAZARDOUS
WASTE. TREAT/RECYCLE MATERIAL IN ACCORDANCE WITH ALL APPLICABLE
REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.