BJXNZ - METAL POLISH

  • MSDS: BJXNZ
  • Manufacturer: CHEMSCOPE CORP
  • Product Name: METAL POLISH
  • National Stock Number: 7930-00-868-4736
Product Identification

Product ID:METAL POLISH
MSDS Date:03/16/1987
FSC:7930
NIIN:00-868-4736
MSDS Number: BJXNZ

Responsible Party
CHEMSCOPE CORPORATION
3200 E. RANDOL MILL RD.
ARLINGTON, TX 76011
US

Emergency Phone: 817-640-5658

Info Phone: 817-640-5658

Preparer: ROGER N. COTMAN

Cage: DO131

Contractor
CHEMSCOPE CORPORATION
ARLINGTON, TX 76011 US

Telephone: 817-640-5653

Cage: DO131

Ingredients

METHYL CHLOROFORM (1,1,1-TRICHLOROEHANE) (SARA III)

CAS: 71-55-6

RTECS: KJ2975000

Fraction By Weight: 97.5%

OSHA PEL 350 PPM/450 STEL

ACGIH TLV: 350 PPM/450STEL;9192

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

Hazards

Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Effects of Overexposure:SKIN & EYE CONTACT MAY CAUSE IRRITATION.
PROLONGED INHALATION MAY CAUSE DIZZINESS AND NAUSEA.

First Aid

First Aid:INHALATION: REMOVE PATIENT TO FRESH AIR, TREAT AS CHLORINATED
HYDROCARBON OVEREXPOSURE. SKIN CONTACT: WASH THOROUGHLY WITH SOAP
AND WATER. EYE CONTACT: FLUSH EYES WITH PLENTY OF WATER, CONTACT
PHYSICI AN.

Fire Fighting

Flash Point:NONE
Lower Limits:7.5
Upper Limits:15.0
Extinguishing Media:WATER, FOAM, DRY CHEMICAL, CARBON DIOXIDE (CO2)
Unusual Fire/Explosion Hazard:FIREFIGHTERS SHOULD WEAR SELF CONTAINED
BREATHING APPARATUS DUE TO THERMAL DECOMPOSITION PRODUCTS.

Accidental Release

Spill Release Procedures:COLLECT SPILL WITH ABSORBENT MATERIAL.

Handling

Handling and Storage Precautions:STORE CONTAINERS IN A COOL, DRY WELL
VENTILATED AREA.

Exposure Controls

Respiratory Protection:NONE REQUIRED IF USED WITH ADEQUATE VENTILATION
Ventilation:LOCAL EXHAUST
Protective Gloves:SOLVENT RESISTANT
Supplemental Safety and Health

Chemical Properties

Boiling Pt:B.P. Text:162F,72C
Vapor Pres:100
Vapor Density:4.6
Spec Gravity:1.30
Evaporation Rate & Reference:0.4 (ETHER=1)
Solubility in Water:NEGLIGIBLE
Appearance and Odor:CLEAR, COLORLESS, SWEET SMELLING LIQUID
Percent Volatiles by Volume:90.5
Corrosion Rate:NON-CORR

Stability

Stability Indicator/Materials to Avoid:YES
STRONG ALKALIES OXIDIZERS, REACTIVE METALS
Stability Condition to Avoid:OPEN FLAME, HOT SURFACES WHICH CAN CAUSE
THERMAL DECOMPOSITION.
Hazardous Decomposition Products:HYDROGEN CHLORIDE, PHOSGENE (SMALL
AMOUNTS)

Disposal

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH LOCAL, STATE AND
FEDERAL LAWS FOR CHLORINATED HYDROCARBONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.