Product ID:DRILUBE #822
MSDS Date:05/16/1987
FSC:9150
NIIN:00-968-1444
MSDS Number: BJXZR

Cage: 06186

Telephone: 818-240-8144

Cage: 06186

FLUOROTELOMER (DUPONT REGISTRY NUMBER 22-57-5)

Fraction By Weight: 40%

FLUOROSILICONE OIL

CAS: 63148-56-1

Fraction By Weight: 60%

Health Hazards Acute and Chronic:NONE SPECIFIED BY MANUFACTURER.
INFORMATION PRESENTED ON AN OSHA FORM 20.
Explanation of Carcinogenicity:NONE SPECIFIED BY MANUFACTURER.
Effects of Overexposure:MAY CAUSE TEMPORARY DISCOMFORT TO EYES.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid:FLUSH EYES AND SKIN WITH PLENTY OF WATER.

Flash Point Method:COC
Flash Point:>250F,>121C
Extinguishing Media:USE CARBON DIOXIDE, FOAM.
Fire Fighting Procedures:NONE
Unusual Fire/Explosion Hazard:NONE

Spill Release Procedures:MOP, WIPE OR SOAK WITH ABSORBENT MATERIAL.
Neutralizing Agent:NOT APPLICABLE.

Handling and Storage Precautions:STORE IN A COOL, DRY, WELL VENTILATED
AREA. AVOID THE CONTAMINATION OF TOBACCO PRODUCTS WITH THE GREASE
WHEN HANDLING.
Other Precautions:TOXIC VAPORS MAY BE EVOLVED AT TEMPERATURES ABOVE 550
F. PROVIDE THE ADEQUATE VERTILATION IF TEMPERATURES ARE LIKELY TO
EXCEDE THIS POINT.

Respiratory Protection:NONE SPECIFIED BY MANUFACTURER.
USE POSITIVE VENTILATION SYSTEM TO REMOVE ALL FUMES WHEN
FLUOROTELOMER COATINGS ARE HEATED ABOVE 400 F.
Ventilation:MECHANICAL (GENERAL) ROOM VENTILATION IS NORMALLY ADEQUATE.
LOCAL EXHAUST MAY BE REQUIRED IF WORK AREA NOT VENTED.
Protective Gloves:NONE GENERALLY NEEDED.
Eye Protection:SAFETY GLASSES
Other Protective Equipment:AS MAY BE REQUIRED BY YOUR EMPLOYER.
Work Hygienic Practices:OBSERVE GOOD PERSONAL HYGIENE PRACTICES AND
RECOMMENDED PROCEDURES.
Supplemental Safety and Health
AVOID PROLONGED OR REPEATED EXPOSURE. DO NOT GET ON SKIN OR IN EYES.

HCC:V6
Boiling Pt:B.P. Text:300F,149C
Vapor Pres:5
Spec Gravity:1.48
Evaporation Rate & Reference:<1 (ETHER = 1)
Solubility in Water:0.1%
Appearance and Odor:WHITE, TRANSLUCENT GREASE. VERY LITTLE ODOR.
Percent Volatiles by Volume:<1

Stability Indicator/Materials to Avoid:YES
NONE KNOWN
Stability Condition to Avoid:HIGH HEAT, OPEN FLAMES AND OTHER SOURCES
OF IGNITION
Hazardous Decomposition Products:FLUORINE PRODUCTS, SIO2, CO2, PFIB,
TFE, HFP, AND OLIGOMERS FROM THE TELOMER AT TEMPERATURES ABOVE 400
F.

Waste Disposal Methods:DISPOSAL SHOULD BE MADE IN ACCORDANCE WITH ALL
APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND REGULATIONS.
MANUFACTURER STATES THAT THE PRODUCT CAN BE LAND FILLED OR BURNED.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.