BKBCN - NAPHTHALENE

  • MSDS: BKBCN
  • Manufacturer: PETROKEM CORP
  • Product Name: NAPHTHALENE
  • National Stock Number: 6840-00-286-6018
Product Identification

Product ID:NAPHTHALENE
MSDS Date:05/27/1988
FSC:6840
NIIN:00-286-6018
MSDS Number: BKBCN

Responsible Party
PETROKEM CORP
101 OLIVER ST
PATERSON, NJ 07509
US

Emergency Phone: 201-742-6468

Info Phone: 201-742-6468

Cage: 0ADH1

Contractor
PETROKEM CORP
2155 PATERSON, NJ 07509 US

Telephone: 201-742-6468

Cage: 0ADH1

Ingredients

NAPHTHALENE (SARA III)

CAS: 91-20-3

RTECS: QJ0525000

OSHA PEL 10 PPM/15 STEL

ACGIH TLV: 10 PPM/15 STEL; 9192

EPA Report Quantity: 100 LBS

DOT Report Quantity: 100 LBS

Hazards

Effects of Overexposure:CONTACT MAY CAUSE SKIN OR EYE IRRITATION.
INHALATION MAY CAUSE HEADACHE, NAUSEA & PERSPIRATION. INGESTION MAY
CAUSE CRAMPS, NAUSEA, VOMITING & DIARRHEA. LOWEST PUBLISHED LETHAL
HUMAN ORAL DOSE- 50 MG/ KG (NIOSH)

First Aid

First Aid:REMOVE CONTAMINATED CLOTHING AT ONCE. FLUSH SKIN & EYES WITH
COPIOUS QUANTITIES OF WATER. SEE A PHYSICIAN IMMEDIATELY FOR BURNS,
EYES, INHALATION SYSTEMS & INGESTION.

Fire Fighting

Flash Point Method:OC
Flash Point:190F,88C
Lower Limits:0.9
Upper Limits:5.9
Extinguishing Media:CARBON DIOXIDE, DRY CHEMICAL, FOAM & WATER
Fire Fighting Procedures:SMOKE & VAPORS FROM NAPHTHALENE FIRES SHOULD
BE AVOIDED. USE SELF CONTAINED BREATHING APPARATUS WITH A FULL FACE
PIECE
Unusual Fire/Explosion Hazard:REACTION BETWEEN WATER & MOLTEN
NAPHTHALENE ABOVE 230F (110C) IS VIOLENT. AVOID USE OF WATER ON
HOLT MOLTEN NAPHTHALENE.

Accidental Release

Spill Release Procedures:SOLIDIFIED NAPHTHALENE CAN BE PICKED UP WITH
BROOM & NON-SPARKING SHOVEL. WORKERS SHOULD WEAR DUST RESPIRATOR.
MOLTEN NAPHTHALENE MAY BE ALLOWED TO SOLIDIFY BEFORE BEING CLEANED
UP.

Handling

Handling and Storage Precautions:MOLTEN NAPHTHALENE TANKS SHOULD BE
ADEQUATELY VENTED. INERT GAS BLANKETING IS RECOMMENDED FOR STORAGE
TANKS.

Exposure Controls

Ventilation:LOCAL EXHAUST:EXHAUST FAN NEEDED FOR USE IN CLOSED AREAS.
MECHANICAL(GENERAL):VENT TANKS OF MOLTEN NAPHTHALENE.
Protective Gloves:RUBBER OR OTHER CHEMICAL HANDLING GLOVES
Eye Protection:SAFETY GOGGLES
Other Protective Equipment:FACE SHIELD WHEN HANDLING LIQUID, FRESH AIR
MASKS FOR FIRES, LOCATE SAFETY SHOWER & WASH IN AREA.
Supplemental Safety and Health

Chemical Properties

HCC:V4
Boiling Pt:B.P. Text:424F,218C
Melt/Freeze Pt:M.P/F.P Text:176F @ 80C
Vapor Pres:0.082
Vapor Density:4.42
Spec Gravity:1.145
Evaporation Rate & Reference:1 (OTHER=1)
Solubility in Water:0.003G/100G @ 68F
Appearance and Odor:WHITE SOLID (MOTH BALL ODOR)

Stability

Stability Indicator/Materials to Avoid:YES
Stability Condition to Avoid:AVOID CLOSED ROOM. AVOID CONTACT BETWEEN
WATER & HOT NAPHTHALENE

Disposal

Waste Disposal Methods:WASTE NAPHTHALENE MAY BE INCINERATED OR BURIED
AS APPLICABLE CODES & REGULATIONS PERMIT. WORKERS SHOULD WEAR
ORGANIC VAPOR/ DUST RESPIRATOR FOR LIQUID/SOLIDS HANDLING & SELF
CONTAINED AIR SUPPLY AROUN D BURNING NAPHTHALENE.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.