BKBYZ - COATING POLYAMIDE CTG SG LT BROWN 20313
- MSDS: BKBYZ
- Manufacturer: STRATHMORE PRODUCTS INC
- Product Name: COATING POLYAMIDE CTG SG LT BROWN 20313
- National Stock Number: 8010-01-033-7485
Product Identification
Product ID:COATING POLYAMIDE CTG SG LT BROWN 20313
MSDS Date:01/30/1991
FSC:8010
NIIN:01-033-7485
Kit Part:Y
MSDS Number: BKBYZ
Responsible Party
SYRACUSE, NY 13201
US
Emergency Phone: 315-488-5401; 315-476-4766
Info Phone: 315-488-5401
Cage: GO043
Contractor
Telephone: (315) 488-5401 OR (315) 476-4766
Cage: GO043
Ingredients
TOLUENE (SARA III)
CAS: 108-88-3
RTECS: XS5250000
Fraction By Weight: 7.50%
OSHA PEL 200 PPM/150 STEL
ACGIH TLV: 50 PPM; 9293
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
ACETIC ACID, 2-METHOXY-1-METHYLETHYL ESTER (PMA GLYCOL
CAS: 108-65-6
RTECS: AI8925000
Fraction By Weight: 1.10%
N-BUTYL ALCOHOL (SARA III)
CAS: 71-36-3
RTECS: EO1400000
Fraction By Weight: 6.90%
OSHA PEL 100 PPM
ACGIH TLV: S, C 50 PPM; 9293
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
METHYL ETHYL KETONE (2-BUTANONE) (MEK) (SARA III)
CAS: 78-93-3
RTECS: EL6475000
Fraction By Weight: 6.60%
OSHA PEL 200 PPM/300 STEL
ACGIH TLV: 200 PPM/300STEL 9192
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
METHYL PROPYL KETONE (2-PENTANONE)
CAS: 107-87-9
RTECS: SA7875000
Fraction By Weight: 7.80%
OSHA PEL 200 PPM/250 STEL
ACGIH TLV: 200 PPM/250STEL;9192
TITANIUM DIOXIDE
CAS: 13463-67-7
RTECS: XR2275000
OSHA PEL 15 MG/M3 TDUST
ACGIH TLV: 10 MG/M3 TDUST; 9293
IRON OXIDE, CAS#S 1309-37-1 & 51274-00-1.
OSHA PEL 10 MG(FE)/M3, TDUST
ACGIH TLV: 5 MG(FE)/M3, FUME
TALC (CONTAINING NO ASBESTOS)
CAS: 14807-96-6
RTECS: WW2710000
OSHA PEL 2 MG/M3 RDUST
ACGIH TLV: 2 MG/M3 RDUST; 9192
PRLNG OR RPTD CONT OF LIQ OR BRTHG OF VAPS MAY
RTECS: 9999999ZZ
HEAT,SPARKS & OPEN FLAME.USE ONLY W/ADEQ VENT.AVOID
RTECS: 9999999ZZ
EYES & SKIN. DO NOT TAKE INTERNALLY. EMPTY CNTNRS
RTECS: 9999999ZZ
VAPS. DO NOT CUT, PUNCTURE/WELD ON OR NEAR CNTNR.
RTECS: 9999999ZZ
HAS BEEN CLEANED OR RECONDITIONED. SUPP DATA
RTECS: 9999999ZZ
OVEREXP TO SOLVENTS WITH PERMANENT BRAIN AND
RTECS: 9999999ZZ
INHALING CONTENTS MAY BE HARMFUL OR FATAL.
RTECS: 9999999ZZ
RPTD/PRLNG
RTECS: 9999999ZZ
MAY BE HARMFUL IF ABSORBED THROUGH
RTECS: 9999999ZZ
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE (SHORT TERM): INHAL OF
VAPS/SPRAY MISTS CAN CAUSE IRRIT OF RESP TRACT/ACUTE NERV SYS
DEPRESS CHARACTERIZED BY HDCH, DIZZ, STAG GAIT, CONFUSN,
UNCON/COMA. OVEREXP TO VAPS/SPRAY MISTS CAN CAUSE EY E & SKIN
IRRIT. EYE CONT W/LIQ MAY CAUSE SEV IRRIT. INGEST: MAY BE HARMFUL
IF SWALLOWED. (SEE EFTS OF OVEREXP)
Effects of Overexposure:HLTH HAZ: CAN CAUSE GI IRRIT, NAUS, DIARRHEA &
POSS VOMIT. ASPIR OF MATL IN LUNGS CAN CAUSE PNEUM WHICH CAN BE
FATAL. CHRONIC (LONG TERM): RPTD/PRLNG OCCUPATIONAL OVEREXP TO VAPS
MAY AFFECT THE CNS & CAUSE RESP IRRIT, AND MAY CAUSE LIVER &KIDNEY
DAMAGE. (SEE SUPP DATA)
Medical Cond Aggravated by Exposure:EXPOSURE MAY AGGRAVATE PREEXISTING
SKIN, EYE, AND RESPIRATORY DISORDERS.
First Aid
First Aid:INHAL: REMOVE TO FRESH AIR. IF BRTHG HAS STOPPED GIVE
MOUTH-TO-MOUTH RESUSCITATION & KEEP WARM & QUIET. IF BRTHG IS
DFCLT, GIVE OXYGEN. GET MD IMMED. EYE: FLUSH IMMED W/COPIOUS QTYS
OF WATER FOR AT LE AST 15 MIN & TAKE TO MD FOR DEFINITIVE MED
TREATMENT. SKIN: REMOVE CONTAM CLTHG & WASH AFFECTED AREA W/SOAP &
WATER. IF IRRIT PERSISTS, SEE MD. INGEST: DO NOT INDUCE VOMIT; CALL
MD/POIS CTL CTR IMMED.
Fire Fighting
Flash Point Method:SCC
Flash Point:38.0F,3.3C
Lower Limits:SEE INGRED
Extinguishing Media:DRY CHEMICAL, CO*2 OR WATER SPRAY.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPRVD SCBA AND FULL PROT
EQUIP. REMOVE ANY SOURCES OF IGNIT. WATER MAY BE USED TO COOL
UNRUPTURED CLOSED CNTNRS TO PREVENT (SEE SUPP DATA)
Unusual Fire/Explosion Hazard:KEEP CNTNRS TIGHTLY CLOSED. ISOLATE FROM
HEAT, ELEC EQUIP, SPARKS & OPEN FLAME. CLOSED CNTNRS MAY EXPLODE
WHEN EXPOSD TO EXTREME HEAT. DO NOT APPLY TO HOT SURF.
Accidental Release
Spill Release Procedures:REMOVE ALL SOURCES OF IGNIT (FLAMES, HOT
SURFACES & ELEC, STATIC OR FRICTION SPARKS). AVOID BRTHG VAPS. VENT
AREA. REMOVE W/INERT ABSORB & NON-SPARKING TOOLS. TRANSFER TO
APPROP CNTNR FOR DISP. KEEP O UT OF SEWERS, STORM DRAINS, SURF
WATER & SOIL.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:DO NOT STORE ABOVE 120F. STORE LARGE
QUANTITIES IN BUILDINGS DESIGNED AND PROTECTED FOR STORAGE OF NFPA
CLASS 1B FLAMMABLE LIQUIDS.
Other Precautions:CONTAINERS SHOULD BE GROUNDED WHEN POURING. DO NOT
FLAME CUT, BRAZE OR WELD WITHOUT NIOSH/MSHA APPRVD RESP OR APPROP
VENT. WARNING: FLAM. VAP HARMFUL. MAY CAUSE EYE BURNS. MAY CAUSE
IRRIT. HEATING FOR MS HAZARDOUS VAP. (SEE INGRED 9)
Exposure Controls
Respiratory Protection:OUTDOOR/OPEN AREAS - NIOSH/MSHA APPRVD MECH
FILTER RESP TO REMOVE AIRBORNE PARTICLES OF OVERSPRAY. RESTRICTED
VENT AREAS - CHEM MECH FILTER TO REMOVE A COMB OF PARTICULATE &
VAP. CONFINED AREAS - AIR LINE TYPE RESP OR HOODS.
Ventilation:GEN DILUTION/LOC EXHAUST VENT IN VOL & PATTERN TO KEEP
TLV/LEL< LIM & REMOVE DECOMP PRODS DURING WELDING/FLAME CUTTING.
Protective Gloves:SOLVENT RESISTANT GLOVES.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:PREVENT PROLONGED SKIN CONTACT TO
CONTAMINATED CLOTHING.
Work Hygienic Practices:WASH THOROUGHLY AFTER USE AND BEFORE EATING,
DRINKING, SMOKING OR USING SANITARY FACILITIES .
Supplemental Safety and Health
FIRE FIGHT PROC: PRESS BUILDUP AND POSSIBLE AUTO-IGNITION OR EXPLOSION
WHEN EXPOSED TO EXTREME HEAT. IF WATER IS USED, FOG NOZZLES ARE
PREFERABLE. EFTS OF OVEREXP: A CASE EFFECT SHOWED ACTIVE LIVER &
KIDNEY DYSFUNCTION AT EXTREMELY HIGH LEVELS OF EXPOSURE TO XYLENE
AND TOLUENE. (SEE INGRED 13)
Chemical Properties
Boiling Pt:B.P. Text:175F,79C
Vapor Pres:SEE INGRED
Vapor Density:>AIR
Spec Gravity:1.44
Evaporation Rate & Reference:SLOWER THAN ETHER
Appearance and Odor:NONE SPECIFIED BY MANUFACTURER.
Percent Volatiles by Volume:52.7
Stability
Stability Indicator/Materials to Avoid:YES
AVOID CONTAMINATION WITH ALKALINES, STRONG ACIDS.
Stability Condition to Avoid:EXCESSIVE HEAT, SPARKS, OPEN FLAME.
Hazardous Decomposition Products:ACRID FUMES, SMOKE AND CARBON MONOXIDE
AND/OR CARBON DIOXIDE.
Disposal
Waste Disposal Methods:DISPOSE IN ACCORDANCE WITH LOCAL, STATE AND
FEDERAL REGULATIONS. INCINERATE IN APPROVED FACILITY. DO NOT
INCINERATE CLOSED CONTAINERS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.