BKFLW - AUTOMOTIVE

Product Identification

Product ID:AUTOMOTIVE
MSDS Date:02/28/1991
FSC:2540
NIIN:00F015975
MSDS Number: BKFLW

Responsible Party
OWENS-CORNING FIBERGLAS CORP
FIBERGLAS TOWER
TOLEDO, OH 43604-1540
US

Emergency Phone: 419-248-8234 OR 419-248-5330

Info Phone: 419-248-8234 OR 708-594-6977

Cage: 45255

Contractor
OWENS-CORNING, WORLD HEADQUARTERS
TOLEDO, OH 43659 US

Telephone: 419-248-8234

Cage: 45255

Ingredients

ASPHALT FUMES, ASPHALT, CUTBACK ASPHALT

CAS: 8052-42-4

RTECS: CI9900000

Fraction By Weight: 100%

OSHA PEL 5 MG/CUM (RESP DUST)

ACGIH TLV: 5 MG/CUM


HYDROGEN SULFIDE

CAS: 7783-06-4

RTECS: MX1225000

Fraction By Weight: TRACE

OSHA PEL (C),20 PPM

ACGIH TLV: 10 PPM/15 STEL; 9293

EPA Report Quantity: 100 LBS

DOT Report Quantity: 100 LBS


POLYCYCLIC AROMATIC HYDROCARBONS (SUSPECTED 2B CARCINOGEN)

Fraction By Weight: TRACE

Hazards

Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:YES IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHALATION: ASPHALT FUMES CAN CAUSE
NOSE, THROAT, MUCOUS MEMBRANE IRRITATION, NAUSEA, HEADACHE, OR
DIZZINESS. SKIN: HOT PRODUCT MAY CAUSE THERMAL BURNS. EYES: SEVERE
IRRITATION, REDNESS, TEARING, & BL URRED VISION. INGESTION:
MOUTH/THROAT/GASTROINTESTINAL TRACT IRRITATION & UPSET W/POSSIBLE
NAUSEA, VOMITING, & DIARRHEA.
Explanation of Carcinogenicity:SEE INGREDIENTS
Effects of Overexposure:SKIN: COLD PRODUCT MAY RESULT IN DRYNESS &
IRRITATION. ASPHALT FUMES CAN INCREASE SENSITIVITY TO SUN, & CAUSE
DISCOLORATION. DERMATITIS.
Medical Cond Aggravated by Exposure:CHRONIC SKIN OR RESPIRATORY
DISORDERS

First Aid

First Aid:INHALATION: REMOVE TO FRESH AIR. GIVE OXYGEN/CPR. SKIN: HOT
MATERIAL-DRENCH/IMMERSE IN WATER. APPLY ICED WATER/ICE PACKS. DON'T
USE ICE WATER/COLD PACKS IF BURN COVERS >10% OF BODY. MEDICAL
PERSONNEL CAN SOFTEN/REMOVE COOLED ASPHALT W/PETROLEUM JELLY. COLD
MATERIAL-CLEAN W/WATERLESS HAND CLEANER/SOAP/WATER. EYE: FLUSH
W/WATER. INGESTION: DON'T INDUCE VOMITING. OBTAIN MEDICAL
ATTENTION.

Fire Fighting

Flash Point Method:COC
Flash Point:>400F ASPHALT
Extinguishing Media:FOAM, CO2, DRY CHEMICAL.
Fire Fighting Procedures:TREAT AS HYDROCARBON FIRE. WATER MAY BE USED
TO COOL CONTAINERS IN FIRE EXPOSED AREA. USE SELF-CONTAINED
BREATHING APPARATUS.
Unusual Fire/Explosion Hazard:HOT ASPHALT MAY IGNITE FLAMMABLE MATERIAL
ON CONTACT. DON'T USE WATER ON ASPHALT FIRE, IT MAY CAUSE VIOLENT
ERUPTION & SPREADING OF HOT ASPHALT.

Accidental Release

Spill Release Procedures:DIKE STORAGE TANKS TO PREVENT MATERIAL FROM
ENTERING SEWERS OR WATERWAYS. ABSORB W/INERT MATERIALS SUCH AS
SAND/VERMICULITE. DISPOSE OF AS SOLID REGULATED WASTE.

Handling

Handling and Storage Precautions:DON'T ALLOW HOT, MOLTEN ASPHALT TO
CONTACT WATER AS THIS MAY CAUSE VIOLENT ERUPTIONS & SPREADING OF
HOT ASPHALT. ENSURE ADEQUATE VENTILATION.
Other Precautions:AVOID CONTACT W/SKIN/EYES/CLOTHING. KETTLES SHOULD BE
OPERATED AT THE LOWEST POSSIBLE TEMPERATURE THAT ALLOWS PROPER
APPLICATION. KETTLES SHOULD HAVE TIGHT-FITTING LIDS & BE USED IN
WELL VENTILATED AR EAS. USE CAUTION AROUND BULK CONTAINER.

Exposure Controls

Respiratory Protection:IF TLV EXCEEDED, A NIOSH/MSHA APPROVED AIR
PURIFYING DUST/MIST/FUMES RESPIRATOR, SUPPLIED AIR RESPIRATORS OR
SELF-CONTAINED BREATHING APPARATUS. HYDROGEN SULFIDE, EXTREMELY
FLAMMABLE, HIGHLY TOXIC GAS , MAYBE RELEASED FROM HEATED ASPHALT.
Ventilation:OUTDOOR USE: ADEQUATE & AVOID FUMES BY WORKING UPWIND.
INDOOR USE: ADEQUATE BUILDING VENTILATION & LOCAL EXHAUST.
Protective Gloves:LEATHER OR LINED NEOPRENE COATING
Eye Protection:CHEMICAL SAFETY GLASSES/FACE SHIELD
Other Protective Equipment:LONG SLEEVED SHIRT & LONG PAINTS,
SUNSCREENS, SAFETY SHOWERS, EYE WASH STATIONS
Work Hygienic Practices:REMOVE/LAUNDER CONTAMINATED CLOTHING BEFORE
REUSE. WASH HANDS & ARMS FREQUENTLY. SHOWER AFTER EXPOSURE.
Supplemental Safety and Health
ASPHALT DOES CONTAIN A SMALL AMOUNT OF POLYCYCLIC AROMATIC HYDROCARBONS
WHICH HAVE BEEN SHOWN TO CAUSE CANCER & RESPIRATORY DAMAGE IN
ANIMALS. HYDROGEN SULFIDE IS A PRODUCT CONTAMINANT. SENSE OF SMELL
RAPIDLY BECOMES INSENSITIVE TO HYDROGEN SULFIDE, ITS ODOR CAN'T BE
RELIED AS AN INDICATOR OF ITS CONCENTRATION.

Chemical Properties

Boiling Pt:B.P. Text:700F
Spec Gravity: 1
Appearance and Odor:BROWN TO BLACK SOLID, FAINT PETROLEUM ODOR.
Percent Volatiles by Volume:0%

Stability

Stability Indicator/Materials to Avoid:YES
WATER, STRONG OXIDIZERS
Stability Condition to Avoid:HEAT
Hazardous Decomposition Products:CO, CO2, SULFUR OXIDES, VARIOUS
HYDROCARBON FRACTIONS, HYDROGEN SULFIDE GAS

Disposal

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE W/LOCAL, STATE, &
FEDERAL REGULATIONS. PRIMARY DISPOSAL METHOD FOR DRY SOLID WASTE IS
LANDFILLS OR INCINERATION. NA1999.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.