BKHPC - X-512

Product Identification

Product ID:X-512
MSDS Date:05/05/1986
FSC:8040
NIIN:00-526-1910
MSDS Number: BKHPC

Responsible Party
BAKER SEALANTS & COATINGS CO.
234 SUYDAM AVE.
JERSEY CITY, NJ 07304

Emergency Phone: (201) 333-6986

Info Phone: (201) 333-6986

Cage: FO833

Contractor
BAKER SEALANTS AND COATINGS CO
JERSEY CITY, NJ 07304-3306 US

Telephone: 201-333-6986

Cage: 34094

Ingredients

METHYL METHACRYLATE (SARA III)

CAS: 80-62-6

RTECS: OZ5075000

Fraction By Weight: 64%

OSHA PEL 100 PPM

ACGIH TLV: 100 PPM; 9192

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS


ACRYLATE POLYMER, POLYACRYLATE, CARBOMER 941, POLYACRYLIC

CAS: 9003-01-4

RTECS: AT4680000

Fraction By Weight: 36%

Hazards

Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHALATION: NOSE & THROAT IRRITATION.
EYES: IRRITATION & CORNEAL INJURY. INGESTION/SKIN: IRRITATION.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:INHALATION: NOSE & THROAT IRRITATION. EYES:
IRRITATION & CORNEAL INJURY. SKIN/INGESTION: IRRITATION.

First Aid

First Aid:SKIN/EYES: FLUSH W/WATER. INHALATION: REMOVE TO FRESH AIR.
GIVE OXYGEN IF NEEDED. INGESTION: GIVE 2 GLASSES OF WATER TO DRINK.
OBTAIN MEDICAL ATTENTION IN ALL CASES.

Fire Fighting

Flash Point Method:SCC
Flash Point:49F
Lower Limits:2.12%
Upper Limits:12.5%
Extinguishing Media:ALCOHOL FOAM, CO2, DRY CHEMICAL, WATER SPRAY
Fire Fighting Procedures:WEAR SELF-CONTAINED BREATHING APPARATUS & FULL
PROTECTIVE CLOTHING. USE WATER SPRAY TO COOL CONTAINERS.
Unusual Fire/Explosion Hazard:HEATED SEALED CONTAINERS CAN EXPLODE.
FLAMMABLE LIQUID. AUTOIGNITION TEMPERATURE: 815F.

Accidental Release

Spill Release Procedures:EVACUATE & VENTILATE AREA. ELIMINATE IGNITION
SOURCES. WEAR PROTECTIVE EQUIPMENT. DIKE & CONTAIN SPILL. ADD EXTRA
INHIBITOR TO PREVENT POLYMERIZATION.

Handling

Handling and Storage Precautions:STORE AT AMBIENT TEMPERATURES. GROUND
ALL CONTAINERS WHEN TRANSFERING MATERIAL. USE MATERIAL WITHIN 6
MONTHS.
Other Precautions:MATERIAL STORED IN BULK SHOULD BE TESTED FOR
STABILITY EVERY MONTH; DRUMS & PAILS EVERY 3 MONTHS.

Exposure Controls

Respiratory Protection:NONE REQUIRED IF GOOD VENTILATION IS MAINTAINED.
ELSE WEAR SELF-CONTAINED BREATHING APPARATUS.
Ventilation:PROVIDE MECHANICAL EXHAUST VENTILATION.
Protective Gloves:IMPERVIOUS
Eye Protection:CHEMICAL SPLASH GOGGLES
Other Protective Equipment:IMPERVIOUS CLOTHING
Supplemental Safety and Health

Chemical Properties

Boiling Pt:B.P. Text:214F
Melt/Freeze Pt:M.P/F.P Text:-54F
Vapor Pres:29
Vapor Density:3.5
Spec Gravity:0.94
Evaporation Rate & Reference:(BU AC = 1): >1
Solubility in Water:MODERATE

Stability

Stability Indicator/Materials to Avoid:YES
OXIDIZING AGENT, ACIDS, BASES & CONTAMINATION
Stability Condition to Avoid:HEAT, AGING, CONTAMINATION, OXYGEN-FREE
ATMOSPHERE, UV LIGHT & IGNITION SOURCES
Conditions to Avoid Polymerization:HEAT, OXYGEN-FREE ATMOSPHERE,
SUNLIGHT

Disposal

Waste Disposal Methods:DISPOSE & DUMP IN ACCORDANCE W/LOCAL, STATE, &
FEDERAL REGULATIONS. FLAMMABLE LIQUID.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.