BKHWY - "B" COMPS FOR FROTH REFILL (1.5-4.0 PCF)

  • MSDS: BKHWY
  • Manufacturer: INSTA FOAM PRODUCTS INC
  • Product Name: "B" COMPS FOR FROTH REFILL (1.5-4.0 PCF)
  • National Stock Number: 5640-01-122-5010
Product Identification

Product ID:"B" COMPS FOR FROTH REFILL (1.5-4.0 PCF)
MSDS Date:02/23/1988
FSC:5640
NIIN:01-122-5010
MSDS Number: BKHWY

Responsible Party
INSTA-FOAM PRODUCTS, INC.
1500 CEDARWOOD DRIVE
JOLIET, IL 60435

Emergency Phone: (815) 741-6800 EXT 56

Info Phone: (800) 435-9359

Preparer: R. BRAUN

Cage: 54577

Contractor
INSTA-FOAM PRODUCTS INC
JOLIET, IL 60435 US

Telephone: 815-741-6800

Cage: 54577

Ingredients

POLYOL

Fraction By Weight: <70%


FLAME RETARDANTS

Fraction By Weight: <30%


CATALYST

Fraction By Weight: <10%


TRICHLOROFLUOROMETHANE (CFC-11) (SARA III)

CAS: 75-69-4

RTECS: PB6125000

Fraction By Weight: <30%

OSHA PEL 1000 PPM

ACGIH TLV: C, 1000 PPM; 9293

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS


SILICONE SURFACTANT

Fraction By Weight: <2%

ACGIH TLV: 1000 PPM


DICHLORODIFLUOROMETHANE (SARA III)

CAS: 75-71-8

RTECS: PA8200000

Fraction By Weight: <15%

OSHA PEL 1000 PPM

ACGIH TLV: 1000 PPM; 9192

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

Hazards

Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:SKIN/EYES: IRRITATION. INHALATION:
IRRITATION. INGESTION: IRRITATION TO MUCOUS MEMBRANES.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:EYES/SKIN: IRRITATION. INGESTION: IRRITATION OF
THE MUCOUS MEMBRANES. INHALATION: HIGH CONCENTRATIONS >1000 PPM MAY
CAUSE ASPHYXIATION DUE TO OXYGEN DEPRIVATION.

First Aid

First Aid:EYES: FLUSH W/PLENTY OF WATER FOR AT LEAST 15 MINS. SKIN:
WASH THOROUGHLY W/SOAP & WATER. INHALATION: REMOVE TO FRESH AIR.
GIVE CPR OR OXYGEN IF NEEDED. INGESTION: DRINK 1 OR 2 GLASSES OF
WATER & INDU CE VOMITING. NEVER GIVE ANYTHING BY MOUTH TO AN
UNCONSCIOUS PERSON. OBTAIN MEDICAL ATTENTION IN ALL CASES.

Fire Fighting

Extinguishing Media:WATER, CO2, DRY CHEMICAL
Fire Fighting Procedures:WEAR SELF-CONTAINED BREATHING APPARATUS & FULL
PROTECTIVE CLOTHING. USE COLD WATER TO COOL FIRE EXPOSED
CONTAINERS.
Unusual Fire/Explosion Hazard:SINCE THE CHEMICAL IS PACKAGED IN
PRESSURIZED AEROSOL CANS, EXPLOSIVE RUPTURE IS POSSIBLE. SINCE EACH
CAN IS PRESSURIZED, STORAGE TEMPS >120 CAUSES RUPTURE.

Accidental Release

Spill Release Procedures:PROVIDE VENTILATION, ISOLATE AREA. ABSORB
SPILL WITH SAWDUST OR VERMICULITE & COLLECT IN SUITABLE CONTAINERS.
WASH REMAINING RESIDUE FROM SURFACE WITH SOAP & WATER.

Handling

Handling and Storage Precautions:PROTECT TANKS FROM PHYSICAL ABUSE. FOR
LONGEST SHELF LIFE, AVOID STORAGE >90F. SHORT TERM STORE BETWEEN 40
& 60 F WILL NOT HARM THE MATERIALS.
Other Precautions:IDEAL STORAGE IS 60F TO 90F. STORAGE AT <40F MAY
CAUSE LIQUIDS IN THE TANK TO SEPARATE THEREBY PRODUCING LOWER
QUALITY FOAM. AVOID SMOKING. WHEN FLUOROCARBONS ARE INHALED THROUGH
LIGHTED CIGARETTER, T OXIC PRODUCTS ARE GENERATED.

Exposure Controls

Respiratory Protection:IF TLV'S EXCEEDING, USE NIOSH/MSHA APPROVED RESP
W/FULL FACEPIECE.
Ventilation:USE WITH ADEQUATE VENTILATION
Protective Gloves:CHEMICAL RESISTANT RUBBER/PLASTIC
Eye Protection:SAFETY GOGGLES
Other Protective Equipment:RUBBER COAT, BOOTS, HELMET, LONG SLEEVE WORK
CLOTHES
Work Hygienic Practices:REMOVE/LAUNDER CONTAMINATED CLOTHING BEFORE
REUSE.
Supplemental Safety and Health
THE FOAM SYSTEM CONSISTS OF TWO AEROSOL CANS (COMPONENT A & B) W/DEVICE
FOR MIXING THE CONTENTS OF THE TWO CANS IN SMALL INCREMENTS, THUS
PRODUCING URETHANE FOAM.

Chemical Properties

Boiling Pt:B.P. Text:-21.6F
Vapor Pres:2500
Vapor Density:>1
Spec Gravity:1.2
Solubility in Water:SLIGHT
Appearance and Odor:BROWN TO LIGHT YELLOW, MILD FLUOROCARBON ODOR.
Percent Volatiles by Volume:<35%

Stability

Stability Indicator/Materials to Avoid:YES
ALKALIE/ALKALINE EARTH METALS/POWDERED
ALUMINUM/ZINC/BERYLLIUM/ACIDS/BASES/OXIDIZERS & CATALYSTS
ALUMINUM/FERIC CHLORIDE
Stability Condition to Avoid:HIGH TEMPERATURES, OPEN FLAMES, GLOWING
SURFACES
Hazardous Decomposition Products:HYDROCHLORIC & HYDROFLUORIC
ACIDS/POSSIBLE CARBONYL HALIDES/GASES/MISTS/FUMES

Disposal

Waste Disposal Methods:DON'T PUNCTURE/INCINERATE CANS. VENT CANS TO
PREVENT VALVES FROM BECOMING PLUGGED/FROZEN. PLACE PLASTIC ACTUATOR
CAP ON EACH CAN VALVE. DISPENSE CONTENTS INTO PLASTIC LINED WASTE
CONTAINER. DISPOSE OF IN ACCORDANCE W/FEDERAL/STATE/LOCAL
REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.