Product ID:PL-2
MSDS Date:08/09/1990
FSC:8030
NIIN:00-244-1295
MSDS Number: BKJHJ

Emergency Phone: 318-234-6327

Info Phone: 318-234-7436

Preparer: EMILIO BELTRAN

Cage: KO815

Telephone: 318-234-7436

Cage: KO815

OIL AS A MIST

ACGIH TLV: 5 MG/M3

< 10 G/L (0.1 LBS/GL)

RTECS: 9999999VO

Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EXPOSURE TO VAPORS OR MISTS MAY CAUSE
PULMONARY IRRITATION, DIZZINESS AND NAUSEA. PROLONGED OR REPEATED
CONTACT MAY CAUSE VARIOUS SKIN DISORDERS SUCH AS DERMATITIS,
FOLLICULITIS OR OIL ACNE.

First Aid:INHALATION: REMOVE VICTIM TO UNCONTAMINATED AREA. IF
BREATHING IS IRREGULAR OR STOPPED, PROVIDE OXYGEN OR RESUSCITATION.
SEEK MEDICAL AID. SKIN: FLUSH SKIN THOROUGHLY WITH WATER. REMOVE
CONTAMINATED C LOTHING. EYE: FLUSH EYES THOROUGHLY FOR15 MINUTES
WITH WATER. SEEK MEDICAL AID. INGEST: DO NOT INDUCE VOMITING. SEEK
IMMEDIATE MEDICAL AID.

Flash Point Method:COC
Flash Point:355F,179C
Extinguishing Media:FOAM, CO2, DRY CHEMICAL.
Fire Fighting Procedures:PREHEATED MAT'L MAY BURN. DO NOT ENTER
CONFINED AREA W/OUT FULL BUNKER GEAR, AND POSITIVE PRESSURE NIOSH
APPR'D SCBA. COOL FIRE EXPOSED CONTAINERS WITH WATER.

Spill Release Procedures:CONTAIN THE SOURCE OF THE LEAK IF POSSIBLE.
DIKE AND CONTAIN THE SPILL USING VACUUM OR PUMPS TO REMOVE THE
MATERIAL. SOAK UP ANY EXCESS WITH OIL ABSORBENT MATERIAL. DISPOSE
OF PROPERLY.

Handling and Storage Precautions:DO NOT STORE NEAR HEAT, SPARKS OR OPEN
FLAMES.
Other Precautions:EMPTY CONTAINERS MAY RETAIN HAZARDOUS PROPERTIES. DO
NOT CUT, WELD OR PUNCTURE ON OR NEAR CONTAINERS.

Respiratory Protection:RECOMMENDED
Ventilation:RECOMMENDED
Protective Gloves:RUBBER/OIL RESISTANT
Eye Protection:CHEMICAL SPLASH GOGGLES
Work Hygienic Practices:MINIMIZE SKIN CONTACT.
Supplemental Safety and Health

HCC:T6
Vapor Density:> AIR
Viscosity:1750 CP
Evaporation Rate & Reference:SLOWER THAN ETHER
Percent Volatiles by Volume:1/2

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS
Stability Condition to Avoid:HEAT, OPEN FLAMES, OXIDIZING MATERIALS
Hazardous Decomposition Products:CARBON MONOXIDE AND UNIDENTIFIED
ORGANIC COMPOUNDS MAY BE FORMED DURING COMBUSTION.
Conditions to Avoid Polymerization:HEAT, OPEN FLAMES, OXIDIZING
MATERIALS.

Waste Disposal Methods:DISPOSE OF MATERIAL IN ACCORDANCE WITH FEDERAL,
STATE AND LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.