Product ID:RTV102
MSDS Date:03/05/1990
FSC:8040
NIIN:00-877-9872
Kit Part:Y
MSDS Number: BKJQZ

GENERAL ELECTRIC CO., SILICONE PRODUCT DIV.

HUDSON RIVER ROAD
WATERFORD, NY 12188
US

Emergency Phone: 518-237-3330

Info Phone: 518-237-3330

Preparer: DA POLSINELLI

Cage: 01139

GENERAL ELECTRIC CO, SILICONE PRODUCTS BUSINESS DEPT

WATERFORD, NY 12188 US

Telephone: 518-237-3330/800-332-3390

Cage: 01139

METHYLTRIACETOXY SILANE (HAZARDOUS) (PEL/TLV ARE

CAS: 4253-34-3

RTECS: VV4500000

Fraction By Weight: 1-5%

OSHA PEL 10 PPM

ACGIH TLV: 10 PPM

POLYDIMETHYLSILOXANE

CAS: 9016-00-6

RTECS: TQ2690000

Fraction By Weight: 60-80%

TRADE SECRET COMPONENT

Fraction By Weight: 5-10%

TRADE SECRET COMPONENT

Fraction By Weight: 10-30%

OSHA PEL 15 MG/M3

ACGIH TLV: 10 MG/M3

Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INGEST: MAY BE HARMFUL IF SWALLOWED.
SKIN: UNCURED PRODUCT MAY IRRITATE SKIN.INHALE: UNCURED PRODUCT
CAUSES MILD RESPIRATORY IRRITATION, CAUSES IRRITATION OF THE MOUTH,
NOSE AND THROAT. EYE: UNCURED P RODUCT IRRITATES EYES.

First Aid:INGEST: DO NOT INDUCE VOMITING. SLOWLY DILUTE WITH 1-2
GLASSES OF WATER OR MILK & SEEK MEDICAL AID. NEVER GIVE ANYTHING BY
MOUTH TO AN UNCONSCIOUS PERSON. SKIN: REMOVE COMPLETELY WITH A DRY
CLOTH OR P APER TOWEL BEFORE WASHING WITH DETERGENT AND WATER.
INHALE: MOVE PERSON TO FRESH AIR. EYE: IMMEDIATELY FLUSH WITH
PLENTY OF WATER FOR AT LEAST 15 MIN & GET MEDICAL AID IF IRRITATION
PERSISTS.

Flash Point:NA
Extinguishing Media:ALL STANDARD FIREFIGHTING MEDIA
Fire Fighting Procedures:NONE KNOWN

Spill Release Procedures:WIPE, SCRAPE OR SOAK UP IN AN INERT MATERIAL
AND PUT IN A CONTAINER FOR DISPOSAL. WASH WALKING SURFACES WITH
DETERGENT AND WATER TO REDUCE SLIPPING HAZARD. WEAR PROPER
PROTECTIVE EQUIPMENT.

Handling and Storage Precautions:KEEP CONTAINER CLOSED WHEN NOT IN USE.
AVOID CONTACT WITH SKIN AND EYES. ONLY IN A WELL VENTILATED AREA TO
PREVENT IRRITATION BY VAPORS.

Respiratory Protection:USE IN A WELL VENTILATED AREA.
Ventilation:USE ONLY IN WELL VENTILATED AREA. USE MECHANICAL
VENTILATION TO STAY BELOW TLV OF 10 PPM ACETIC ACID.
Protective Gloves:CLOTH GLOVES.
Eye Protection:SAFETY GLASSES.
Other Protective Equipment:EYEWASH STATIONS.
Work Hygienic Practices:REMOVE CONTACT LENSES BEFORE USING SEALANT. DO
NOT HANDLE LENSES UNTIL SEALANT HAS BEEN CLEANED FROM THE
FINGERTIPS,*
Supplemental Safety and Health
*NAILS AND CUTICLES. RESIDUAL SEALANT MAY REMAIN ON FINGERS FOR SEVERAL
DAYS AND TRANSFER TO LENSES AND CAUSE SEVERE EYE IRRITATION.
PRODUCT RELEASES ACETIC ACID DURING APPLICATION AND CURING.

Spec Gravity:1.07
Evaporation Rate & Reference:< 1 (BU AC=1)
Solubility in Water:INSOLUBLE
Appearance and Odor:WHITE SOLID, ACETIC ACID ODOR
Percent Volatiles by Volume:<5

Stability Indicator/Materials to Avoid:YES
NONE KNOWN
Stability Condition to Avoid:NONE KNOWN
Hazardous Decomposition Products:CARBON DIOXIDE, SILICON DIOXIDE,
ACETIC ACID.

Waste Disposal Methods:DISPOSAL SHOULD BE MADE IN ACCORDANCE WITH
FEDERAL, STATE AND LOCAL REGULATIONS. BURY IN A LICENSED LANDFILL
OR BURN IN AN APPROVED INCINERATOR ACCORDING TO FEDERAL, STATE AND
LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.