Product ID:SCOTCH WELD 1751-B EPOXY ADHESIVE (ALUMINUM
MSDS Date:12/30/1988
FSC:8040
NIIN:00-959-1854
Kit Part:Y
MSDS Number: BKJSK

3M COMPANY

3M CENTER
ST. PAUL, MN 55144-1000
US

Emergency Phone: 612-733-1110

Info Phone: 612-733-1110

Cage: 76381

MINNESOTA MINING AND MFG CO, DBA 3M

SAINT PAUL, MN 55144-1000 US

Telephone: 866-556 5712 / 612-733-1110

Cage: 76381

EPOXY RESIN

CAS: 25068-38-6

RTECS: KD4380000

Fraction By Weight: 50-60%

ALUMINUM (SARA III)

CAS: 7429-90-5

RTECS: BD0330000

Fraction By Weight: 30-40%

OSHA PEL 15MG/M3 DUST/5 FUME

ACGIH TLV: 10MG/M3 DUST; 9192

CLAY

CAS: 68953-58-2

Fraction By Weight: 1-10%

AMORPHOUS SILICA

CAS: 112945-52-5

RTECS: VV7310000

Fraction By Weight: 1-10%

OSHA PEL 20 MPPCF

ACGIH TLV: 3 MG/M3; 6 MG/M3

RESORCINOL (SARA III)

CAS: 108-46-3

RTECS: VG9625000

Fraction By Weight: 1-10%

OSHA PEL 10 PPM/20 STEL

ACGIH TLV: 10 PPM/20 STEL; 9192

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Health Hazards Acute and Chronic:EYE CONTACT: PRODUCT MAY BE IRRITATING
TO EYES UPON DIRECT CONTACT. SKIN CONTACT: PRODUCT MAY BE
IRRITATING TO THE SKIN ON PROLONGED OR REPEATED CONTACT. THE EPOXY
RESIN IN THIS PRODUCT IS A SKIN SENS ITIZER, ESPECIALLY FOR CERTAIN
SUSCEPTIBLE INDIVIDUALS. INHALATION: MAY BE IRRITATING TO NOSE &
THROAT. INGESTION: ORAL*
Effects of Overexposure:*TOXICITY IS NEGLIGIBLE.

First Aid:EYE CONTACT: FLUSH EYES WITH PLENTY OF WATER FOR AT LEAST 10
MINTUES AND CALL A PHYSICIAN. SKIN CONTACT: WASH THOROUGHLY WITH
SOAP AND WATER. INHALATION: REMOVE INDIVIDUAL TO FRESH AIR. CALL A
PHYSICI AN. IF SWALLOWED: DO NOT INDUCE VOMITING. IMMEDIATELY CALL
A PHYSICIAN OR POISON CONTROL CENTER.

Extinguishing Media:CO2, FOAM, DRY CHEMICALS, WATER.
Fire Fighting Procedures:FIRE FIGHTERS SHOULD BE EQUIPPED WITH
SELF-CONTAINED BREATHING APPARATUS WHEN FIGHTING FIRES INVOLVING
THIS MATERIAL.

Spill Release Procedures:VENTILATE THE AREA. OBSERVE THE PRECAUTIONS
FROM OTHER SECTIONS. COLLECT SPILLED MATERIALS. PLACE IN A U.S.
DEPARTMENT OF TRANSPORTATION-APPROVED METAL CONTAINER AND SEAL.

Handling and Storage Precautions:AVOID BREATHING VAPORS RELEASED DURING
HEAT CURING. CURING OVENS SHOULD BE PROPERLY VENTED TO THE OUTDOORS
OR SUITABLE EMISSION CONTROL DEVICE.
Other Precautions:AVOID EYE AND SKIN CONTACT. AVOID BREATHING DUST FROM
CUTTING, GRINDING OR SANDING OPERATIONS ON THE CURED MATERIAL. KEEP
OUT OF REACH OF CHILDREN.

Ventilation:USE ONLY WITH SUFFICIENT VENTILATION TO MAINTAIN VAPOR
CONCENTRATIONS BELOW RECOMMENDED EXPOSURE LIMITS.
Protective Gloves:IMPERVIOUS GLOVES.
Eye Protection:SAFETY GLASSES OR GOGGLES & DUST MASK.
Work Hygienic Practices:WASH CONTAMINATED CLOTHING BEFORE REUSE.
Supplemental Safety and Health

Spec Gravity:CA. 1.300
Viscosity:PASTE
Solubility in Water:VERY SLIGHT
Appearance and Odor:GRAY, VISCOUS PASTE, LITTLE ODOR.
Percent Volatiles by Volume:0.00

Stability Indicator/Materials to Avoid:YES
Hazardous Decomposition Products:THERMAL DECOMPOSITION OR BURNING MAY
PRODUCE C, H, N DECOMPOSITION PRODUCTS

Waste Disposal Methods:MIX PART A WITH PART B. COMPLETELY CURE AND
DISPOSE OF FULLY CURED WASTE PRODUCT IN A SANITARY LANDFILL.
INCINERATE UNCURED BULK PRODUCT AFTER MIXING WITH FLAMMABLE
MATERIAL IN AN INDUSTRIAL OR COMMER CIAL FACILITY. DISPOSE PER
APPLICABLE REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.