BKJSZ - FE-0004-A

  • MSDS: BKJSZ
  • Manufacturer: H B FULLER COMPANY
  • Product Name: FE-0004-A
  • National Stock Number: 8040-00-998-3339
Product Identification

Product ID:FE-0004-A
MSDS Date:12/11/1988
FSC:8040
NIIN:00-998-3339
Kit Part:Y
MSDS Number: BKJSZ

Responsible Party
H. B. FULLER COMPANY
1200 WOLTERS BLVD
VADNAIS HEIGHTS, MN 55110
US

Emergency Phone: 612-481-3300

Info Phone: 612-481-3300

Cage: 75782

Contractor
H.B. FULLER COMPANY
ST. PAUL, MN 55126-8076 US

Telephone: 612-236-5300/ -5309 FAX

Cage: 0DH19

Ingredients

EPOXY RESIN

Fraction By Weight: >10%

Hazards

Routes of Entry: Inhalation:NO Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYES: DIRECT EYE CONTACT WITH THE
PRODUCT MAY CAUSE IRRITATION. SKIN: EPOXY RESINS ARE POTENTIAL
DERMAL SENSITIZERS. INHALATION: INHALATION IS NOT A ROUTE OF
EXPOSURE.

First Aid

First Aid:EYES: FLUSH IMMEDIATELY WITH WATER FOR 15 MINUTES. CONSULT A
PHYSICIAN IF IRRITATION PERSISTS. SKIN: WASH AFFECTED AREA WITH
SOAP AND WATER. LAUNDER CONTAMINATED CLOTHING BEFORE REUSE.

Fire Fighting

Flash Point Method:TCC
Flash Point:>200F,>93C
Extinguishing Media:USE WATER SPRAY, FOAM, DRY CHEMICAL OR CARBON
DIOXIDE.
Fire Fighting Procedures:PERSONS EXPOSED TO PRODUCTS OF COMBUSTION
SHOULD WEAR SELF-CONTAINED BREATHING APPARATUS AND FULL PROTECTIVE
EQUIPMENT.

Accidental Release

Spill Release Procedures:WEAR RUBBER GLOVES AND WIPE UP WITH ABSORBENT
MATERIAL. RESIDUE MAY BE REMOVED WITH A CHLORINATED SOLVENT.

Handling

Handling and Storage Precautions:STORE IN A COOL, DRY LOCATION.
Other Precautions:AVOID SKIN CONTACT WITH PRODUCT AT ALL TIMES.

Exposure Controls

Respiratory Protection:NOT NORMALLY REQUIRED.
Ventilation:STANDARD INDUSTRIAL VENTILATION.
Protective Gloves:RUBBER GLOVES.
Eye Protection:SAFETY GLASSES.
Other Protective Equipment:PREVENT CONTACT BY USING APPROPRIATE
PROTECTIVE CLOTHING.
Work Hygienic Practices:LAUNDER CONTAMINATED CLOTHING BEFORE REUSE.
Supplemental Safety and Health

Chemical Properties

Viscosity:25,000 CPS
Appearance and Odor:LIQUID

Stability

Stability Indicator/Materials to Avoid:YES
Hazardous Decomposition Products:INCOMPLETE COMBUSTION CAN YIELD LOW
MOLECULAR WEIGHT HYDROCARBONS, CARBON MONOXIDE.

Disposal

Waste Disposal Methods:THIS PRODUCT DOES NOT MEET THE DEFINITION OF
HAZARDOUS WASTE. INCINERATE OR DISPOSE OF IN AN APPROVED INDUSTRIAL
LANDFILL. CONSULT YOUR STATE OR LOCAL AUTHORITIES IN THE EVENT MORE
RESTRICTIVE REQUIRE MENTS APPLY.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.