Product ID:FE-7002-B
MSDS Date:02/12/1991
FSC:8040
NIIN:00N014905
Kit Part:Y
MSDS Number: BKLHG

Emergency Phone: 800-228-5635

Info Phone: 612-481-3300

Preparer: INDUSTRIAL HYGIENE

Cage: 0HD19

Telephone: 612-481-3300

Cage: 1Y052

POLYAMIDE RESIN

Fraction By Weight: >10%

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:NO Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYES:STRONG IRRITANT. SKIN:CONTACT
WILL CAUSE MODERATE IRRITATION. INHAL:NOT A ROUTE OF EXPOSURE.
CHRONIC:NO ANTICIPATED CHRONIC EFFECTS.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NO KNOWN EFFECTS ON OTHER
ILLNESSES.

First Aid:EYE:FLUSH IMMEDIATELY W/LARGE AMTS OF WATER FOR AT LEAST 15
MINUTES. CALL MD. SKIN:WASH AFFECTED AREA W/SOAP & WATER. LAUNDER
CONTAMINATED CLTHG BEFORE REUSE. INHAL:REMOVE FROM EXPOSURE.
RESTORE BREAT HING IF NECESSARY. KEEP WARM & QUIET. CALL MD.
INGEST:CALL MD IMMEDIATELY .

Flash Point Method:SCC
Flash Point:>400F,>204C
Extinguishing Media:USE WATER SPRAY, FOAM, DRY CHEMICAL OR CARBON
DIOXIDE.
Fire Fighting Procedures:PERSONS EXPOSED TO PRODUCTS OF COMBUSTION
SHOULD WEAR NIOSH/MSHA APPROVED SCBA AND FULL PROTECTIVE EQUIPMENT.
Unusual Fire/Explosion Hazard:NONE KNOWN.

Spill Release Procedures:WEAR RUBBER GLOVES AND WIPE UP W/ABSORBENT
MATERIAL. RESIDUE MAY BE REMOVED W/CHLORINATED SOLVENT.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:STORE IN COOL, DRY LOCATION.
Other Precautions:AVOID SKIN CONTACT WITH PRODUCT AT ALL TIMES.

Respiratory Protection:NOT NORMALLY REQUIRED. USE NIOSH/MSHA APPROVED
RESPIRATOR APPROPRIATE FOR EXPOSURE OF CONCERN .
Ventilation:STANDARD INDUSTRIAL VENTILATION.
Protective Gloves:RUBBER GLOVES.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:PROTECTIVE CLOTHING.
Work Hygienic Practices:WASH HANDS THOROUGHLY AFTER USE AND BEFORE
EATING, DRINKING, SMOKING OR USING SANITARY FACILITIES .
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

HCC:N1
Spec Gravity:0.96
Appearance and Odor:LIQUID.

Stability Indicator/Materials to Avoid:YES
NONE SPECIFIED BY MANUFACTURER.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:INCOMPLETE COMBUSTION CAN YIELD LOW
MOLECULAR WEIGHT HYDROCARBONS, CARBON MONOXIDE, NITROGEN COMPOUNDS.

Waste Disposal Methods:INCINERATE OR DISPOSE OF IN APPROVED LANDFILL
I/A/W FEDERAL, STATE AND LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.