BKLYQ - AMERLOCK 400
- MSDS: BKLYQ
- Manufacturer: AMERON PROTECTIVE COATINGS
- Product Name: AMERLOCK 400
- National Stock Number: 8030-00N014796
Product Identification
Product ID:AMERLOCK 400
MSDS Date:03/10/1989
FSC:8030
NIIN:00N014796
MSDS Number: BKLYQ
Responsible Party
BREA, CA 92621
US
Emergency Phone: 800-424-9300 (CHEMTREC)
Info Phone: 714-529-1951
Cage: 0Y2E4
Contractor
Telephone: 714-529-1951
Cage: 0Y2E4
Ingredients
BARIUM SULFATE
CAS: 7727-43-7
RTECS: CR0600000
Fraction By Weight: <25%
OSHA PEL 15 MG/M3 TDUST
ACGIH TLV: 10 MG/M3 TDUST; 9293
TALC, CONTAINING NO ASBESTOS FIBERS (MAGNESIUM SILICATE).
CAS: 14807-96-6
RTECS: MW2710000
Fraction By Weight: <20%
OSHA PEL 2 MG/M3 RDUST
ACGIH TLV: 2 MG/M3 RDUST
XYLENES (O-,M-,P- ISOMERS) (SARA III)
CAS: 1330-20-7
RTECS: ZE2100000
Fraction By Weight: <15%
OSHA PEL 100 PPM/150 STEL
ACGIH TLV: 100 PPM/150STEL;9192
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
<1
CAS: 84832-15-3
Fraction By Weight: <10%
<1
CAS: 9046-10-0
Fraction By Weight: <10%
FURFURYL ALCOHOL
CAS: 68953-58-2
RTECS: UZ2996400
Fraction By Weight: <5%
OSHA PEL S, 50 PPM/15 STEL
ACGIH TLV: S,10 PPM/15STEL;9293
CRYSTALLINE SILICA
Fraction By Weight: <1%
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:YES OSHA:NO
Health Hazards Acute and Chronic:VAPOR, SPRAY MIST AND/OR DUST CAN BE
HARMFUL. IRRITATION TO SKIN, MUCOUS MEMBRANE, EYES & RESPIRATORY
SYSTEM. EXCESSIVE INHAL CAN CAUSE HEADACHE, NAUSEA, DIZZ OR ASPHY.
CAN BE HARMFUL IF SWALLOWED. CA N BE HARMFUL IF INHALED OR ABSORBED
THRU SKIN. OVEREXPOS CAN DMG CNS. OVEREXPOS OR INGEST CAN CAUSE
(SEE SIGNS AND SYMP)
Explanation of Carcinogenicity:CRYSTALLINE SILICA-IARC 2A.
Effects of Overexposure:HLTH HAZ: LUNG, KIDNEY AND/OR LIVER DMG.
OVEREXP CAN CAUSE IRREVERSIBLE EYE BURNS AND DMG. CHRONIC: SKIN AND
RESP SENSIT AND ALLERGIC REACTION CAN OCCUR. SKIN AND RESP SENSIT
AND ALLERGIC REACTION CAN OCCUR. RPTD/PRLG OCCUPATIONAL EXPOS
TOSOLVENTS HAVE BEEN ASSOCIATED WITH PERMANENT BRAIN AND NERVOUS
SYSTEM DAMAGE.
Medical Cond Aggravated by Exposure:RESPIRATORY, KIDNEY AND LIVER
DISORDERS.
First Aid
First Aid:OVEREXP TO VAP, SPRAY MIST OR DUST: PROVIDE FRESH AIR; IF
BREATHING LABORED, GIVE OXYGEN OR ARTF RESP. FOR SKIN CONT: WASH
THORO WITH SOAP AND WATER. FOR EYES: FLUSH IMMED WITH PLENTY OF
WATER FOR AT LEAST 15 MINUTES AND GET MD. IF SWALLOWED: DRINK 1 OR
2 GLASSES OF WATER TO DILUTE. DO NOT INDUCE VOMITING. CONSULT MD OR
POISON CONTROL CTR IMMED. TREAT SYMPTOMATICALLY.
Fire Fighting
Flash Point Method:SCC
Flash Point:85.0F,29.4C
Lower Limits:1.0%
Upper Limits:7.0%
Extinguishing Media:FOAM, CO*2, DRY CHEMICAL.
Fire Fighting Procedures:USE NIOSH/MSHA APPRVD SCBA AND FULL PROT
EQUIPMENT .
Unusual Fire/Explosion Hazard:CLSD CNTNRS MAY EXPLODE WHEN EXPSD TO
EXTREME HEAT. ISOLATE FROM HEAT, ELEC EQUIP, SPARKS & OPEN FLAME.
VAPS MAY SPREAD LONG DISTANCES, CAUSE FLASH FIRE/IGNITE.
Accidental Release
Spill Release Procedures:AVOID BREATHING OF VAPORS OR DUST. USE
ABSORBENT CLEANUP MATERIALS OR SWEEP UP. PLACE IN SEPARATE
CONTAINER. ELIMINATE ALL SOURCES OF IGNITION.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:KEEP CONTAINER CLOSED, UPRIGHT WHEN
NOT IN USE. STORE IN COOL, DRY, WELL VENTILATED AREA. AVOID STORAGE
TEMPS ABOVE 100F.
Other Precautions:DO NOT TAKE INTERNALLY. AVOID PROLONGED BREATHING OF
DUST, VAPORS OR SPRAY MIST OR CONTACT WITH SKIN AND EYES. DO NOT
WELD OR FLAME CUT AN EMPTY CONTAINER. GROUND CONTAINERS WHEN
POURING.
Exposure Controls
Respiratory Protection:NIOSH/MSHA APPRVD CERTIFIED RESP. FOR SPECIFIC
CNDTNS REFER TO NIOSH POCKET GUIDE TO CHEM HAZ, DHEW NO 78-210. USE
NIOSH/MSHA APPRVD AIR-LINE RESP IN CONFINED OR RESTRICTED VENT
AREAS, OR WITH POLYURE THANE OR ISOCYANATES.
Ventilation:SUFFICIENT VENT, IN VOLUME & PATTERN, SHOULD BE PROVIDED TO
KEEP AIR CONTAMINANT CONC
Eye Protection:CHEM WORK GOGGLES, FACESHIELD OPTIONAL.
Other Protective Equipment:FULL PROTECTIVE CLOTHING AND SPARK PROOF
EQUIPMENT.
Work Hygienic Practices:WASH THOROUGHLY BEFORE EATING, SMOKING OR USING
WASHROOM. LAUNDER CONTAM CLOTHING BEFORE REUSE.
Supplemental Safety and Health
VENT: WELDING OR FLAME CUTTING DECOMPOSITION PRODUCTS. REFER TO 29 CFR,
OSHA PARTS 1910, 1915, AND 1916 FOR COATING OPERATIONS.
Chemical Properties
HCC:F4
Boiling Pt:B.P. Text:282F,139C
Vapor Pres:SEE INGRED
Vapor Density:>AIR
Evaporation Rate & Reference:LOW/HIGH:0.70 (BU AC = 1)
Appearance and Odor:LIQUID, SOLVENT ODOR.
Percent Volatiles by Volume:28
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS, ACIDS, ALKALIES. EPOXIES UNDER UNCONTROLLED
CONDITIONS.
Stability Condition to Avoid:HEAT, OPEN FLAME, ARC OR SPARKS.
Hazardous Decomposition Products:CO, CO*2, NO*X & AMMONIA.
Disposal
Waste Disposal Methods:IN SEPARATE, CLOSED METAL CONTAINER IN
ACCORDANCE WITH ALL APPLICABLE REGULATIONS. EPA WASTE NO: D001 D239
D002. DISPOSE IN ACCORDANCE WITH FEDERAL, STATE AND LOCAL
REGULATIONS .
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.