Product ID:JR-334
MSDS Date:01/01/1987
FSC:8040
NIIN:00N015067
MSDS Number: BKNNP

BACON INDUSTRIES, INC.

192 PLEASANT STREET
WATERTOWN, MA 02172
US

Emergency Phone: 617-926-2550

Info Phone: 617-926-2550

Cage: 99098

BACON INDUSTRIES, INC.

WATERTOWN, MA 02172 US

Telephone: 617-926-2550

Cage: 99098

ETHYL ACETATE (SARA III)

CAS: 141-78-6

RTECS: AH5425000

Fraction By Weight: 35%

OSHA PEL 400 PPM

ACGIH TLV: 400 PPM; 9192

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

ISOPROPYL ALCOHOL (SARA III)

CAS: 67-63-0

RTECS: NT8050000

Fraction By Weight: 10%

OSHA PEL 400 PPM/500 STEL

ACGIH TLV: 400 PPM/500STEL;9192

DIBUTYL PHTHALATE (SARA III)

CAS: 84-74-2

RTECS: TI0875000

Fraction By Weight: 10%

OSHA PEL 5 MG/M3

ACGIH TLV: 5 MG/M3; 9192

EPA Report Quantity: 10 LBS

DOT Report Quantity: 10 LBS

TOLUENE (SARA III)

CAS: 108-88-3

RTECS: XS5250000

Fraction By Weight: <5%

OSHA PEL 200 PPM/150 STEL

ACGIH TLV: 50 PPM; 9293

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

ETHYL ALCOHOL (ETHANOL)

CAS: 64-17-5

RTECS: KQ6300000

Fraction By Weight: <5%

OSHA PEL 1000 PPM

ACGIH TLV: 1000 PPM; 9192

METHYL ETHYL KETONE PEROXIDE (MEKP) (SARA III)

CAS: 1338-23-4

RTECS: EL9480000

Fraction By Weight: <5%

OSHA PEL C 0.7 PPM

ACGIH TLV: C 0.2; 9192

EPA Report Quantity: 10 LBS

DOT Report Quantity: 10 LBS

2-PHENYLPHENOL (SARA III)

CAS: 90-43-7

RTECS: DV5775000

Fraction By Weight: <1%

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE:INHAL:ANESTHETIC. RESPIRATORY
IRRITATION, DIZZINESS, HEADACHE, UNCONSCIOUSNESS. SKIN/EYE:PRIMARY
IRRITATION. CHRONIC:EFFECTS OF EXCESSIVE CHRONIC EXPOSURE TO
PRODUCT HAVE NOT BEEN FULLY INVESTIG ATED. REPEATED HANDLING OR USE
MAY PRESENT ADDITIONAL HAZARDS. EXERCISE DUE CARE.
Explanation of Carcinogenicity:NONE SPECIFIED BY MANUFACTURER.
Effects of Overexposure:NONE SPECIFIED BY MANUFACTURER.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid:INHAL:REMOVE FROM EXPOSURE. UNCON, BUT BREATHING, GIVE O*2.
NOT BREATHING, ARTF RESUSCITATION. EYE:FLUSH W/COPIOUS AMTS OF
WATER FOR AT LEAST 15 MIN. SEE MD. SKIN:WASH THOROUGHLY W/SOAP &
WATER. USE H AND LOTION. INGEST:CALL MD IMMEDIATELY .

Flash Point Method:PMCC
Flash Point:22.0F,-5.6C
Extinguishing Media:CARBON DIOXIDE OR DRY CHEMICAL.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:EXPLOSION HAZARD DUE TO PRESSURE BUILD-UP
DUE TO HEAT.

Spill Release Procedures:PROVIDE ADEQUATE VENTILATION. AVOID EXCESSIVE
HEAT, SPARKS AND OPEN FLAME. CLEAN UP W/RAGS. PLACE DIRTY RAGS IN
CONTAINER OF WATER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:STORE IN COOL, WELL VENT AREA. AVOID
EXCESSIVE HEAT, SPARKS & OPEN FLAMES. GROUND CNTNRS & TRANSFER
VESSELS. KEEP FREE FALL OF LIQUID (SEE SUPP DATA)
Other Precautions:DO NOT TAKE INTERNALLY. AVOID PROLONGED BREATHING OF
VAPORS. AVOID PROLONGED CONTACT WITH SKIN.

Respiratory Protection:IN CONFINED AREAS USE:NIOSH/MSHA APPROVED AIR
LINE TYPE RESPIRATORS OR HOODS.
Ventilation:MECH/GEN EXHST:SOLVENT VAPORS SHOULD BE REMOVED BY DILUTION
VENT FROM LOWER LEVELS. LOCAL EXHST:KEEP (SEE SUPP DATA)
Protective Gloves:PROTECTIVE GLOVES RECOMMENDED.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:AS REQUIRED TO AVOID SKIN CONTACT.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
HNDLG/STOR PREC:TO A FEW INCHES TO AVOID BUILD-UP OF STATIC
ELECTRICITY. VENT:VAPORS BELOW LEL AND TLV. ELIMINATE ALL IGNITION
SOURCES.

HCC:F3
Boiling Pt:B.P. Text:165F,74C
Vapor Density:HVR/AIR
Spec Gravity:1.03
Appearance and Odor:PINK
Percent Volatiles by Volume:67.5

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS.
Stability Condition to Avoid:EXCESSIVE HEAT, SPARKS, OPEN FLAMES.
Hazardous Decomposition Products:CARBON MONOXIDE MAY BE FORMED BY
INCOMPLETE COMBUSTION.
Conditions to Avoid Polymerization:EXCESSIVE HEAT, SPARKS AND OPEN
FLAMES.

Waste Disposal Methods:DISTILL OFF SOLVENTS UNDER STRICTLY SAFE
CONDITIONS. RE-USE DISTILLATE. DISPOSE OF RESIDUE AS LANDFILL.
DISPOSE OF I/A/W FEDERAL, STATE AND LOCAL REGULALTIONS .

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.