Product ID:BARCO BOND MB-175 PT A
MSDS Date:07/01/1989
FSC:8040
NIIN:00-262-1060
Kit Part:Y
MSDS Number: BKNTM

ASTRO CHEMICAL CO INC

3 MILL RD
BALLSTON LAKE, NY 12019-0200
US

Info Phone: 518-399-5338; 518-399-7432

Cage: 28473

ASTRO CHEMICAL COMPANY, INC

1250 BALLSTON LAKE, NY 12019-1250 US

Telephone: 518-399-5338

Cage: 28473

SILICA

CAS: 7631-86-9

Fraction By Weight: 07%

EPON 820 (EPICHLOROHYDRIN - BISA EPOXY RESIN)

CAS: 25068-38-6

RTECS: KC2100000

Fraction By Weight: 93%

LD50 LC50 Mixture:LD50:(DRM,RBT)>20 G/KG.
Routes of Entry: Inhalation:NO Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE:INHAL:SENSITIZATION OF
RESPIRATORY TRACT NOT LIKELY UNLESS RESIN IS HEATED TO HIGH OR
COMBUSTION TEMPERATURES. INGEST:LOW ACUTE ORAL TOXICITY. SKIN:MAY
CAUSE DERMITITIS, SKIN SENSITIZATION. EYE: MODERATE TO SEVERE
IRRITATION. NO CORNEAL INJURY LIKELY.
Explanation of Carcinogenicity:NONE SPECIFIED BY MANUFACTURER.
Effects of Overexposure:NONE SPECIFIED BY MANUFACTURER.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid:INHAL:REMOVE TO FRESH AIR IF EFFECTS OCCUR. CALL MD.
INGEST:INDUCE VOMITING IF LARGE AMOUNTS. SKIN:WASH IMMEDIATELY
W/SOAP & WATER. EYE:FLUSH W/COPIOUS AMTS OF WATER FOR AT LEAST 15
MINUTES RAISING EY ELIDS. CALL MD.

Flash Point Method:PMCC
Flash Point:480F,249C
Extinguishing Media:WATER FOG, FOAM, CARBON DIOXIDE, DRY CHEMICAL.
Fire Fighting Procedures:DO NOT BREATHE VAPORS. WEAR NIOSH/MSHA
APPROVED SCBA AND FULL PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:NO UNUSUAL HAZARDS.

Spill Release Procedures:SCRAPE UP EXCESS & WASH AREA W/SOAP & WATER.
SAME PROCEDURE FOR LIQUID SPILL.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:STORE IN VENT AREA AT LESS THAN 100F.
PRACTICE GOOD CAUTION & PERSONAL CLEANLINESS TO AVOID SKIN/EYE
CONTACT. AVOID BRTHG VAPORS OF HEATED MATERIAL.
Other Precautions:NONE.

Respiratory Protection:USUALLY NOT NECESSARY.
Ventilation:GOOD ROOM VENTILATION USUALLY ADEQUATE FOR MOST OPERATIONS.
LOCAL EXHAUST PREFERRED.
Protective Gloves:IMPERVIOUS GLOVES.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:AS REQUIRED TO PREVENT PERSONAL CONTACT.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
CNDTNS (POLYM):POLYMERIZATION W/CONSIDERABLE HEAT BUILDUP. AVOID ACIDS,
BASES AND OXIDIZERS.

HCC:T6
Vapor Density:>1
Spec Gravity:1.2
Solubility in Water:NEGLIGIBLE.
Appearance and Odor:TRANSLUCENT PASTE.

Stability Indicator/Materials to Avoid:YES
ACIDS, BASES AND AMINES.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:CO, VARIOUS ALDEHYDES AND IRRITATING
PRODUCTS.
Conditions to Avoid Polymerization:WILL NOT OCCUR BY ITSELF, MASSES OF
MORE THAN 1 LB OF PROD PLUS ALIPHATIC AMINE WILL CAUSE IRREVERSIBLE
(SEE SUPP DATA)

Waste Disposal Methods:COMPLY WITH ALL FEDERAL, STATE AND LOCAL
REGULATIONS. APPROVED INCINERATOR LANDFILL PER LOCAL AND STATE
REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.