BKRYZ - ELASTA-A-TRIM GL HSE & TRM, 6900
- MSDS: BKRYZ
- Manufacturer: EVR GARD COATINGS CO
- Product Name: ELASTA-A-TRIM GL HSE & TRM, 6900
- National Stock Number: 8010-00N016670
Product Identification
Product ID:ELASTA-A-TRIM GL HSE & TRM, 6900
MSDS Date:01/01/1989
FSC:8010
NIIN:00N016670
MSDS Number: BKRYZ
Responsible Party
PARAMOUNT, CA 90723
US
Emergency Phone: 213-531-0131
Info Phone: 213-541-0131
Cage: 5G582
Contractor
Telephone: 310-531-0131
Cage: 5G582
Ingredients
MINERAL SPIRITS. VP=5.0 MM/HG @ 68F.
Fraction By Weight: 62.75%
OSHA PEL 125 PPM (MFR)
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:NO Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHAL:IRRITATION OF NOSE, THROAT &
EYES, DIZZINESS, WEAKNESS, FATIGUE, NAUSEA, HEADACHE. UNCON IN
EXTREME CASES. SYMP DISAPPEAR WHEN EXPOSURE CEASES. EYE/SKIN:
IRRITANT. INGEST: IRRITATION OF RESP TRA CT CHARACT BY HEADACHE,
DIZZINESS, STAGGERING, CONFUSN & UNCON & COMA IN EXTREME CASES.
REPORTS HAVE (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:HLTH HAZARDS: SHOWN THAT REPEATED & PROLONGED
OCCUPATIONAL OVEREXPOSURE TO SOLVENTS CAN CAUSE PERMANENT BRAIN &
NERVOUS SYSTEM DAMAGE.
Medical Cond Aggravated by Exposure:PROLONGED OR REPEATED CONTACT MAY
CAUSE DERMATITIS.
First Aid
First Aid:EYES: FLUSH W/PLENTY OF WATER FOR AT LEAST 15 MIN. GET MD.
SKIN: REMOVE CONTAMINATED CLOTHING & WASH SKIN W/SOAP & WATER
THOROUGHLY. APPLY LOTION/OIL TO AFFECTED AREAS AFTER THOROUGH
WASHING. GET MD. INHAL: REMOVE TO FRESH AIR. GET MD. INGEST:DO NOT
INDUCE VOMITING. CALL MD IMMEDIATELY.
Fire Fighting
Lower Limits:1%
Extinguishing Media:FOAM, ALCOHOL FOAM, CO*2, DRY CHEMICAL, WATER FOG.
Fire Fighting Procedures:NIOSH/MSHA APPRVD SCBA & FULL PROT EQUIP.
FIGHT AS VOLAT LIQ FIRE. CLSD CNTNRS MAY EXPLODE WHEN EXPOS TO
EXTREME HEAT. KEEP AWAY FROM AREAS EXPOS TO FIRE.
Unusual Fire/Explosion Hazard:AVOID APPLICATN IN AREAS OF PILOT LIGHTS,
SPARKS/OTHER IGNIT SOURCES AS VAPORS MAY ACCUM ON FLOOR & IGNITE.
KEEP CNTNRS CLSD TIGHTLY & STORE IN COOL PLACE.
Accidental Release
Spill Release Procedures:ABSORB SPILLED MATL W/ABSORBENTS, SUCH AS
SAWDUST, CLAYS, ETC., & FLUSH SPILL AREA W/LOTS OF WATER.
Neutralizing Agent:NONE NORMALLY REQUIRED.
Handling
Handling and Storage Precautions:DO NOT STORE NEAR OPEN FLAMES/SOURCES
OF IGNITION. DO NOT STORE IN HIGH TEMP STORAGE. IN CASE OF FIRE,
REMOVE CLSD CNTNRS FROM AREAS EXPOSED TO FIRE.
Other Precautions:EMPTY CNTNRS USUALLY STILL HOLD RESIDUES OF MATERIAL
& VAPORS. THESE MUST BE CONSIDERED HAZARDOUS & DISPOSED OF IN
ACCORDANCE W/PROPER HANDLING PROCEDURES PRESCRIBED FOR HAZARDOUS
CHEMICALS. AVOID PRL NG CONTACT OR OVEREXP.
Exposure Controls
Respiratory Protection:USE NIOSH/MSHA APPRVD RESP APPROPRIATE FOR
EXPOSURE OF CONCERN WHEN USING SOLV BASED COATINGS.
Ventilation:PROVIDE ADEQ VENT IN ALL WORKING AREAS AT ALL TIMES.
SERIOUS HEALTH PROBLEMS COULD RESULT FROM RPTD & PRLNG EXPOS.
Protective Gloves:NEOPRENE, BUNA N.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:NONE SPECIFIED BY MANUFACTURER.
Work Hygienic Practices:STANDARD HYGIENIC PRACTICES MUST BE OBSERVED.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.
Chemical Properties
HCC:N1
Vapor Pres:SEE ING 1
Vapor Density:>AIR
Spec Gravity:1.2
Evaporation Rate & Reference:SLOWER THAN ETHER.
Solubility in Water:NOT SOLUBLE.
Appearance and Odor:WHITE PAINT-COLORS-PAINT THINNER ODOR.
Stability
Stability Indicator/Materials to Avoid:YES
STRONG ACIDS/ALKALIS. LONG TERM CONTACT W/WATER.
Stability Condition to Avoid:AVOID OPEN FLAMES, WELDING ARCS/OTHER HIGH
TEMP SOURCES WHICH INDUCE THERMAL DECOMPOSITION & FIRE.
Hazardous Decomposition Products:THERMAL DECOMPOSITION MAY YIELD CO*2
AND/OR CO.
Disposal
Waste Disposal Methods:DISPOSE OF ALL WASTES, INCLUDING ABSORBENTS USED
TO CLEAN UP SPILLS INTO 55-GAL METAL CNTNRS & DISPOSE IN APPRVD
DUMPSITE IN ACCORDANCE W/PRESCRIBED FEDERAL, STATE AND LOCAL
REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.