BKWWS - WALL TILE GROUT EM
- MSDS: BKWWS
- Manufacturer: DAP INC
- Product Name: WALL TILE GROUT EM
- National Stock Number: 8030-00F017977
Product Identification
Product ID:WALL TILE GROUT EM
MSDS Date:09/22/1988
FSC:8030
NIIN:00F017977
MSDS Number: BKWWS
Responsible Party
DAYTON, OH 45401-0277
Emergency Phone: (800) 543-3840 (513) 667-4461
Info Phone: (800) 543-3840 (513) 667-4461
Cage: 90300
Contractor
Telephone: 513-253-7154/800-543-3840
Cage: 90300
Ingredients
PORTLAND CEMENT
CAS: 65997-15-1
RTECS: VV8770000
Fraction By Weight: 45-55%
OSHA PEL 15 MG/M3 TDUST
ACGIH TLV: 10 MG/M3 TDUST; 9293
Hazards
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:SKIN: DRYNESS & ALKALI BURNS FROM WET
CEMENT. EYES: BUILD-UP OF MATERIAL CAUSING IRRITATION. INHALATION:
BUILD-UP OF MATERIAL IN NOSE & MOUTH CAUSING IRRITATION, &
PULMONARY/RESPIRATORY DAMAGE FROM DR Y-SANDED DUST. INGESTION:
IRRITATION. EARS: BUILD-UP OF MATERIAL CAUSING IRRITATION.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:SKIN: DRYNESS & ALKALI BURNS FROM WET CEMENT.
EYES: BUILD-UP OF MATERIAL CAUSING IRRITATION. INHALATION: BUILD-UP
OF MATERIAL IN NOSE & MOUTH CAUSING IRRITATION, &
PULMONARY/RESPIRATORY DAMAGE FROM DR Y-SANDED DUST. INGESTION:
IRRITATION. EARS: BUILD-UP OF MATERIAL CAUSING IRRITATION.
Medical Cond Aggravated by Exposure:ASTHMATIC CONDITIONS
First Aid
First Aid:EYES: FLUSH W/LARGE AMOUNTS OF WATER FOR 15 MINS. SKIN: WASH
W/SOAP & WATER. INHALATION: REMOVE TO FRESH AIR. INGESTION: DON'T
INDUCE VOMITING. OBTAIN MEDICAL ATTENTION IN ALL CASES.
Fire Fighting
Extinguishing Media:FOAM, CO2, OR DRY CHEMICAL
Fire Fighting Procedures:USE WATER SPRAY TO COOL EXPOSED SURFACES.
Accidental Release
Spill Release Procedures:USE ABSORBENT MATERIAL OR SCRAPE UP DRIED
MATERIAL & PLACE INTO CONTAINERS.
Handling
Handling and Storage Precautions:STORE AWAY FROM ACIDS. KEEP CONTAINERS
TIGHTLY CLOSED WHEN NOT IN USE. KEEP OUT OF REACH OF CHILDREN. KEEP
CONTAINERS FROM EXCESSIVE HEAT.
Other Precautions:AVOID CONTACT W/SKIN.
Exposure Controls
Respiratory Protection:IF 8-HOUR EXPOSURE LIMIT OR VALUE IS EXCEEDED
FOR ANY COMPONENT, USE AN APPROVED NIOSH/OSHA RESPIRATOR.
Ventilation:IF DRY-SANDING, PROVIDE SUFFICIENT MECHANICAL VENTILATION
TO MAINTAIN
Eye Protection:SAFETY GLASSES
Other Protective Equipment:EYEWASH & IMPERVIOUS APRON
Work Hygienic Practices:REMOVE/LAUNDER CONTAMINATED CLOTHING BEFORE
REUSE.
Supplemental Safety and Health
Chemical Properties
Spec Gravity:2.3-2.4
Solubility in Water:ALKALINE DISPERSION
Appearance and Odor:FREE-FLOWING COLORED POWDER W/SLIGHT ODOR.
Percent Volatiles by Volume:<1%
Stability
Stability Indicator/Materials to Avoid:YES
ACIDS
Stability Condition to Avoid:EXCESSIVE HEAT
Disposal
Waste Disposal Methods:DISPOSE OF ACCORDING TO FEDERAL, STATE, & LOCAL
STANDARDS. DON'T REUSE EMPTY CONTAINERS. THIS PRODUCT IS
NON-HAZARDOUS ACCORDING TO U.S. EPA'S HAZARDOUS WASTE MANAGEMENT
REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.