BLBWY - AMERCOAT COPPER-ABLATIVE ANTIFOULANT, 70ESP
- MSDS: BLBWY
- Manufacturer: AMERON PROTECTIVE COATINGS
- Product Name: AMERCOAT COPPER-ABLATIVE ANTIFOULANT, 70ESP
- National Stock Number: 8010-00N016899
Product Identification
Product ID:AMERCOAT COPPER-ABLATIVE ANTIFOULANT, 70ESP
MSDS Date:03/10/1989
FSC:8010
NIIN:00N016899
MSDS Number: BLBWY
Responsible Party
BREA, CA 92621-3904
US
Emergency Phone: 800-424-9300 (CHEMTREC)
Info Phone: 714-529-1951
Cage: 0Y2E4
Contractor
Telephone: 714-529-1951
Cage: 0Y2E4
Ingredients
XYLENES (O-,M-,P- ISOMERS) (SARA III)
CAS: 1330-20-7
RTECS: ZE2100000
Fraction By Weight: 22.13%
OSHA PEL 100 PPM/150 STEL
ACGIH TLV: 100 PPM/150STEL;9192
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
COPPER (SARA III)
CAS: 7440-50-8
RTECS: GL5325000
Fraction By Weight: <25%
OSHA PEL 0.1MG/M3 FUME/1 DUST
ACGIH TLV: 0.2MG/M3 FUME; 9192
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
ZINC OXIDE
CAS: 1314-13-2
RTECS: ZH4810000
Fraction By Weight: <15%
OSHA PEL 15MG/M3 TDUST/5 FUME
ACGIH TLV: 10MG/M3 TDUST; 9293
POLYAMIDE RESIN
CAS: 68410-23-1
Fraction By Weight: <10%
ACGIH TLV: 1 PPM, S (MFR)
TALC (CONTAINING NO ASBESTOS)
CAS: 14807-96-6
RTECS: WW2710000
Fraction By Weight: <10%
OSHA PEL 2 MG/M3 RDUST
ACGIH TLV: 2 MG/M3 RDUST; 9192
(ORAL)=0.5
CAS: 9003-01-4
RTECS: AT4680000
Fraction By Weight: <10%
SILICA, CRYSTALLINE - QUARTZ
CAS: 14808-60-7
RTECS: VV7330000
Fraction By Weight: <5%
OSHA PEL SEE TABLE Z3
ACGIH TLV: 0.1 MG/M3 RDUST;9293
IRON OXIDE
CAS: 1309-37-1
RTECS: NO7400000
Fraction By Weight: <5%
OSHA PEL 10 MG/M3 (FE)
ACGIH TLV: 5 MG/M3(FE),B2; 9293
IRON OXIDE
CAS: 1317-61-9
Fraction By Weight: <5%
OSHA PEL 10 MG(FE)/M3
ACGIH TLV: 5 MG(FE)/M3
ETHYL ALCOHOL (ETHANOL)
CAS: 64-17-5
RTECS: KQ6300000
Fraction By Weight: 2.61%
OSHA PEL 1000 PPM
ACGIH TLV: 1000 PPM; 9192
CARBON BLACK
CAS: 1333-86-4
RTECS: FF5800000
Fraction By Weight: <5%
OSHA PEL 3.5 MG/M3
ACGIH TLV: 3.5 MG/M3; 9192
(ORAL)=6.4 G/KG(RAT)
CAS: 147-14-8
Fraction By Weight: <5%
ACGIH TLV: 0.2 MG/M3 (MFR)
(ORAL)=4.3 G/KG(RAT)
CAS: 8006-39-1
RTECS: WZ6600000
Fraction By Weight: 2.08%
METHYL ETHYL KETONE (2-BUTANONE) (MEK) (SARA III)
CAS: 78-93-3
RTECS: EL6475000
Fraction By Weight: 1.79%
OSHA PEL 200 PPM/300 STEL
ACGIH TLV: 200 PPM/300STEL 9192
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
(ORAL)=6.4 G/KG(RAT)
CAS: 1328-53-6
RTECS: GE4300000
Fraction By Weight: <5%
ACGIH TLV: 1 MG/M3 (MFR)
(ORAL)=5 G/KG(RAT)
CAS: 64742-48-9
Fraction By Weight: 1.11%
OSHA PEL 300 PPM;400 PPM STEL
ACGIH TLV: 300 PPM
Hazards
LD50 LC50 Mixture:SEE INGRED.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:YES OSHA:NO
Health Hazards Acute and Chronic:VAP, SPRAY MIST AND/OR DUST CAN BE
HARMFUL. IRRIT TO SKIN, MUC MEMB, EYES & RESP SYS. EXCESSIVE INHAL
CAN CAUSE HDCH, NAUS, DIZZ/ASPHY. RPTD & PRLNG OCCUP OVEREXP TO
SOLV IS ASSOC W/PERM BRAIN & NERV SYS DMG. CAN BE HARMFUL/FATAL IF
INGEST. CAN BE HARMFUL IF INHAL/ABSORB THRU SKIN. OVEREXP/INGEST
(SEE EFTS OF OVEREXP)
Explanation of Carcinogenicity:CRYSTALLINE SILICA:GROUP 2A (IARC).
Effects of Overexposure:HLTH HAZ:CAN CAUSE LUNG, KIDNEY AND/OR LIVER
DMG. OVEREXP CAN CAUSE SKIN & EYE BURNS AND/OR INJURY. SKIN & RESP
SENSITIZATION & ALLERGIC RXN CAN OCCUR. WELDING FUMES CAN CAUSE
METAL FUME FEVER.
Medical Cond Aggravated by Exposure:RESPIRATORY, KIDNEY & LIVER
DISORDERS. SKIN. EYES.
First Aid
First Aid:INHAL:PROVIDE FRESH AIR. IF BRTHING LABORED, GIVE O*2/ARTF
RESP. SKIN:WASH THORO W/SOAP & H*20. EYES:FLUSH IMMED W/PLENTY OF
WATER FOR AT LEAST 15 MIN & GET MD. INGEST:DRINK ONE/TWO GLASSES OF
WATER T O DILUTE. DO NOT INDUCE VOMIT. CALL MD/POISON CONTROL
CENTER IMMED. TREAT SYMPTOMATICALLY.
Fire Fighting
Flash Point Method:SCC
Flash Point:65.0F,18.3C
Lower Limits:0.90%
Upper Limits:19%
Extinguishing Media:CO*2, DRY CHEMICAL.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:CLSD CNTNRS MAY EXPLODE WHEN EXPOS TO
EXTREME HEAT. ISOLATE FROM HEAT, ELEC EQUIP, SPKS & OPEN FLAME.
AVOID H*2O. GENS HYDROGEN. KEEP UPWIND. VAPS (SEE SUP DAT)
Accidental Release
Spill Release Procedures:AVOID BRTHING OF VAPS/DUST. USE ABSORB CLEANUP
MATERIALS/SWEEP UP. PLACE IN SEPARATE CNTNR. KEEP OUT OF PUBLIC
SEWERS & WATERWAYS. IF ENTRY IS THREATENED/OCCURS, NOTIFY LOCAL
AUTHORITIES. ELIM ALL SOU RCES OF IGNIT.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:KEEP CNTNR CLSD, UPRIGHT WHEN NOT IN
USE. STORE IN COOL, DRY, WELL-VENTED AREA. AVOID STOR TEMPS ABOVE
120F. PROHIBIT SMOKING WHERE ZINC IS STORED.
Other Precautions:DO NOT TAKE INTERNALLY. AVOID PRLNG BRTHING OF DUST,
VAPS/SPRAY MIST/CONTACT W/SKIN & EYES. DO NOT WELD/FLAME CUT AN
EMPTY CNTNR. GROUND CNTNRS WHEN POURING. AVOID H*20 CONTAM.
MOISTURE GENERATES HYDR OGEN. CONTAINS INGRED COVERED BY(SUPDAT)
Exposure Controls
Respiratory Protection:NIOSH/MSHA CERTIFIED RESP FOR SPECIFIC
CONDITIONS OF CONCERN. USE NIOSH/MSHA APPRVD AIR-LINE RESP IN
CONFINED/RESTRICTED VENT AREAS OR W/POLYURETHANE OR ISOCYANATES.
Ventilation:SUFFICIENT VENT IN VOL & PATTERN, SHOULD BE PROVIDED TO
KEEP AIR CONTAM CONC BELOW TLV LIM. REMOVE WELDING (SEE SUP DAT)
Protective Gloves:NEOPRENE OR OTHER SUITABLE GLOVES.
Eye Protection:CHEM WORK GOGG, MAY ADD FULL (SUPP DATA)
Other Protective Equipment:FULL PROTECTIVE CLOTHING. SPARK-PROOF
EQUIPMENT.
Work Hygienic Practices:WASH THORO BEFORE EATING, SMOKING OR USING
WASHROOM. LAUNDER CONTAM CLOTHING BEFORE REUSE.
Supplemental Safety and Health
EXPLO HAZ:MAY SPREAD LONG DIST, CAUSE FLASH FIRE OR IGNITE EXPLOSIVELY.
VENT:OR FLAME CUTTING DECOMP PRODS. OTHER PREC:SARA TITLE III,
SARA, 40 CFR 302, 355, 372 & CA PROP 65. EYE PROT:LENGTH FACESHIE
LD TO GOGGLES .
Chemical Properties
HCC:F3
Boiling Pt:B.P. Text:165F,74C
Vapor Pres:SEE INGRED
Vapor Density:>AIR
Evaporation Rate & Reference:0.7-4.6 (BUTYL ACETATE=1)
Appearance and Odor:LIQUID, SOLVENT ODOR.
Percent Volatiles by Volume:50
Stability
Stability Indicator/Materials to Avoid:NO
STRONG OXIDIZERS, ACIDS, ALKALIES. EPOXIES UNDER UNCONTROLLED
CONDITIONS.
Stability Condition to Avoid:HEAT, OPEN FLAME, ARC/SPKS. WATER OR
MOISTURE.
Hazardous Decomposition Products:CO, CO*2, NO*X, ZINC OXIDE FUMES, IRON
OXIDE FUMES & ACRYLIC MONOMER FUMES.
Disposal
Waste Disposal Methods:DISPOSE OF IN SEPARATE, CLOSED METAL CNTNR I/A/W
ALL APPLICABLE FEDERAL, STATE & LOCAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.