BLCDL - SAVIN PRISM I DRY YELLOW INK/TONER, 8227

  • MSDS: BLCDL
  • Manufacturer: SAVIN CORP
  • Product Name: SAVIN PRISM I DRY YELLOW INK/TONER, 8227
  • National Stock Number: 6850-00N017215
Product Identification

Product ID:SAVIN PRISM I DRY YELLOW INK/TONER, 8227
MSDS Date:07/18/1989
FSC:6850
NIIN:00N017215
MSDS Number: BLCDL

Responsible Party
SAVIN CORP.
9 WEST BROAD STREET
STAMFORD, CT 06904-2270
US

Emergency Phone: 301-921-8503

Info Phone: 301-921-8503

Cage: 29382

Contractor
SAVIN CORP.
12070 STAMFORD, CT 06904-2270 US

Telephone: 203-967-5000

Cage: 29382

Ingredients

IF RUN-OFF OCCURS, NOTIFY PROPER AUTHORITIES AS


ORGANIC PIGMENT


POLYPROPLYLENE WAX

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYE/SKIN: NON-IRRITANT,
NON-SENSITIZING.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:MINIMAL IRRITATION TO RESPIRATORY TRACT MAY
OCCUR AS WITH EXPOSURE TO LARGE AMOUNT OF ANY NON-TOXIC POWDER.
Medical Cond Aggravated by Exposure:ACCUMULATION OF DUST IN REPIRATORY
SYSTEM.

First Aid

First Aid:INHAL: REMOVE TO FRESH AIR, CONSULT MD IF SYMPTOMS PERSIST.
EYES: IN CASE OF CONTACT, IMMED FLUSH WITH COPIOUS QUANTITIES OF
WATER FOR AT LEAST 15 MIN. INGEST: CALL MD IMMEDIATELY .

Fire Fighting

Lower Limits:35.2G/M3
Extinguishing Media:WATER SPRAY, FOAM CO*2, DRY POWDER
Fire Fighting Procedures:THIS MATL WILL BURN IN CASE OF FIRE. DECOMP
PRODUCTS ARE CO, CO*2, AND NO*X. AVOID INHALATION OF SMOKE. WEAR
NIOSH/MSHA APPRVD SCBA & FULL PROT EQUIPMENT.
Unusual Fire/Explosion Hazard:NONE SPECIFIED BY MANUFACTURER.

Accidental Release

Spill Release Procedures:SWEEP UP OR CLEAN UP WITH A VACUUM CLEANER
(USE GROUNDED VACUUM CLEANER).
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:NO SPECIAL HANDLING REQUIREMENTS
NEEDED FOR SAFETY REASONS.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.

Exposure Controls

Respiratory Protection:UNDER NORMAL USE NO SPECIAL PROT IS REQ. AVOID
INHALATION. USE NIOSH/MSHA APPROVED RESP FOR EXPOSURE OF CONCERN .
Ventilation:NONE SPECIFIED BY MANUFACTURER.
Protective Gloves:NONE SPECIFIED BY MANUFACTURER.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:UNDER NORMAL USE NO SPECIAL
EQUIPMENT/CLOTHING REQUIRED.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

Chemical Properties

HCC:N1
Spec Gravity:1.1
Solubility in Water:INSOLUBLE
Appearance and Odor:FINE ODORLESS POWDER (YELLOW IN COLOR)

Stability

Stability Indicator/Materials to Avoid:YES
NONE SPECIFIED BY MANUFACTURER.
Stability Condition to Avoid:HIGH TEMPS
Hazardous Decomposition Products:PHENOL DERIVATIVES, CO*2, NO*X, AND
CARBON MONOXIE, WHEN HEATED AT HIGH TEMPS (>300C).

Disposal

Waste Disposal Methods:LANDFILL OR INCINERATE IN COMPLIANCE WITH
FEDERAL, STATE & LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.