BLCDP - SAVIN PRISM I DRY MAGENTA INK/TONER, 8223
- MSDS: BLCDP
- Manufacturer: SAVIN CORP
- Product Name: SAVIN PRISM I DRY MAGENTA INK/TONER, 8223
- National Stock Number: 6850-00N017218
Product Identification
Product ID:SAVIN PRISM I DRY MAGENTA INK/TONER, 8223
MSDS Date:07/19/1989
FSC:6850
NIIN:00N017218
MSDS Number: BLCDP
Responsible Party
STAMFORD, CT 06904-2270
US
Emergency Phone: 301-921-8503
Info Phone: 301-921-8503
Cage: 29382
Contractor
Telephone: 203-967-5000
Cage: 29382
Ingredients
POLYESTER RESIN
STYRENE-ACRYLIC RESIN
SOLVENT DYE
POLYPROPYLENE WAX
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:SKIN:NON-IRRITANT/SENSITIZATION.
EYE:NON-IRRITANT. MUTAGENICITY-AMES TEST:NEGATIVE (S. TYPHIMURIUM,
ESHERICHIA COLI). INGESTION POSSIBLE BUT VERY UNUSUAL.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:MINIMAL IRRITATION TO RESPIRATORY TRACT MAY
OCCUR AS W/EXPOSURE TO LARGE AMOUNT OF ANY NON-TOXIC POWDER.
Medical Cond Aggravated by Exposure:ACCUMULATION OF DUST IN RESPIRATORY
SYSTEM.
First Aid
First Aid:INHAL:REMOVE TO FRESH AIR. CALL MD IF SYMPTOMS PERSIST.
EYES:IMMEDIATELY FLUSH W/COPIOUS AMOUNTS OF WATER FOR AT LEAST 15
MINUTES. INGEST:GET MD IMMEDIATELY .
Fire Fighting
Lower Limits:31.7 G/M3
Extinguishing Media:WATER SPRAY, FOAM, CARBON DIOXIDE, DRY POWDER.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
PROTECTIVE EQUIPMENT . MATL WILL BURN IN CASE OF FIRE. DECOMP PRODS
ARE CO, CO*2 & NO*X. AVOID INHALATION OF SMOKE.
Unusual Fire/Explosion Hazard:NO INFORMATION AVAILABLE.
Accidental Release
Spill Release Procedures:SWEEP UP OR CLEAN UP W/VACUUM CLEANER (USE
GROUNDED VACUUM CLEANER).
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:NO SPECIAL STORAGE REQUIREMENTS ARE
NEEDED FOR SAFETY REASONS. UNDER NORMAL INTENDED USE NO SPECIAL
HANDLING REQUIRED.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.
Exposure Controls
Respiratory Protection:INHALATION SHOULD BE AVOIDED. USE NIOSH/MSHA
APPROVED RESPIRATOR APPROPRIATE FOR EXPOSURE OF CONCERN .
Ventilation:NONE SPECIFIED BY MANUFACTURER.
Protective Gloves:NONE SPECIFIED BY MANUFACTURER.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:UNDER NORMAL INTENDED USE, NO PROTECTIVE
CLOTHING NOR SPECIAL EQUIPMENT ARE REQUIRED.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.
Chemical Properties
HCC:N1
Spec Gravity:1.1
Solubility in Water:INSOLUBLE
Appearance and Odor:FINE, ODORLESS POWDER (MAGENTA COLOR).
Stability
Stability Indicator/Materials to Avoid:YES
STRONG ACIDS OR BASES.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:PHENOL DERIVATIVES, CO WHEN HEATED AT
HIGH TEMPERATURE (>300C).
Disposal
Waste Disposal Methods:LANDFILL OR INCINERATE IN COMPLIANCE W/FEDERAL,
STATE AND LOCAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.