Product ID:SAVIN PRISM I BLACK COLOR DEVELOPER, 8229
MSDS Date:07/19/1989
FSC:6850
NIIN:00N017220
MSDS Number: BLCDQ

SAVIN CORP.

9 WEST BROAD ST
STAMFORD, CT 06904-2270
US

Emergency Phone: 301-921-8503

Info Phone: 301-921-8503

Cage: 29382

SAVIN CORP.

12070 STAMFORD, CT 06904-2270 US

Telephone: 203-967-5000

Cage: 29382

POLYESTER RESIN

STYRENE-ACRYLIC RESIN

POLYPROPYLENE WAX

IRON POWDER. PEL AND TLV AS IRON OXIDE.

OSHA PEL 10 MG(FE)/M3 TDUST

ACGIH TLV: 5 MG(FE)/M3

CARBON BLACK

CAS: 1333-86-4

RTECS: FF5800000

OSHA PEL 3.5 MG/M3

ACGIH TLV: 3.5 MG/M3; 9192

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:MINIMAL IRRITATION TO RESPIRATORY
TRACT MAY OCCUR AS WITH EXPOSURE TO LARGE AMOUNT OF ANY NON-TOXIC
POWDER. EYE AND SKIN: NON-IRRITANT.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:ACCUMULATION OF DUST IN THE
RESPIRATORY SYSTEM.

First Aid:INHAL: REMOVE TO FRESH AIR, CONSULT MD IF SYMPTOMS PERSIST.
EYES: IMMEDIATELY FLUSH EYES WITH COPIOUS QUANTITIES OF WATER FOR
AT LEAST 15 MIN. INGEST: CALL MD IMMEDIATELY .

Extinguishing Media:WATER SPRAY, FOAM CO*2, DRY POWDER, EXTINGUISHERS.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:THIS MATERIAL WILL BURN IN THE CASE OF
FIRE.

Spill Release Procedures:SWEEP UP OR CLEAN UP WITH A VACUUM CLEANER
(USE A GROUNDED VACUUM CLEANER).
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:NO SPECIAL STORAGE REQUIREMENTS ARE
NEEDED FOR SAFETY REASONS.
Other Precautions:INHALATION SHOULD BE AVOIDED.

Respiratory Protection:NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE FOR
EXPOSURE OF CONCERN .
Ventilation:NONE REQUIRED.
Protective Gloves:NONE REQUIRED.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:NONE REQUIRED.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

HCC:N1
Melt/Freeze Pt:M.P/F.P Text:2800F,1538C
Spec Gravity:7
Solubility in Water:INSOLUBLE
Appearance and Odor:ODORLESS POWDER.

Stability Indicator/Materials to Avoid:YES
STRONG ACIDS OR BASES.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:PHENOL DERIVITIVES, CO, CO*2, AND
NO*X.

Waste Disposal Methods:LANDFILL OR INCINERATE IN COMPLIANCE WITH
FEDERAL, STATE, AND LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.