BLDTT - 1,2-DICHLOROETHANE BATCH, I486130
- MSDS: BLDTT
- Manufacturer: SUPELCO INC
- Product Name: 1,2-DICHLOROETHANE BATCH, I486130
- National Stock Number: 6850-00N019156
Product Identification
Product ID:1,2-DICHLOROETHANE BATCH, I486130
MSDS Date:05/12/1988
FSC:6850
NIIN:00N019156
MSDS Number: BLDTT
Responsible Party
BELLEFONTE, PA 16823-0048
US
Emergency Phone: 814-359-3441
Info Phone: 814-359-3441
Cage: 54968
Contractor
Telephone: 314-771-5765/414-273-3850X5996
Cage: 54968
Ingredients
ETHYLENE DICHLORIDE (SARA III)
CAS: 107-06-2
RTECS: KI0525000
Fraction By Weight: 0.02%
OSHA PEL 50 PPM/C,100PPM
ACGIH TLV: 10 PPM; 9293
EPA Report Quantity: 100 LBS
DOT Report Quantity: 100 LBS
METHYL ALCOHOL (METHANOL) (SARA III)
CAS: 67-56-1
RTECS: PC1400000
Fraction By Weight: 99.98%
OSHA PEL S,200PPM/250STEL
ACGIH TLV: S,200PPM/250STEL; 93
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
Hazards
LD50 LC50 Mixture:SEE INGREDIENTS
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:HARMFUL IF INHALED. MAY BE FATAL IF
SWALLOWED. MAY CAUSE HEADACHE, NAUSEA, GASTROINTESTINAL
DISTURBANCES & BLINDNESS.
Explanation of Carcinogenicity:CONTAIN LESS THAN 0.1% ETHYLENE
DICHLORIDE, THE MINIMUM REPORTABLE AMOUNT.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
First Aid
First Aid:EYES: FLUSH W/WATER FOR A MINIMUM OF 15 MINUTES. CONTACT MD.
SKIN: FLUSH W/LARGE VOLUMES OF WATER. INHAL: IMMED MOVE TO FRESH
AIR. IF BRTHG STOPS, GIVE ARTF RESP. CONTACT MD. INGEST: NEVER GIVE
ANYTHI NG BY MOUTH TO AN UNCON PERSON. NEVER TRY TO MAKE AN UNCON
PERSON VOMIT. GIVE 2 TABLESPOONS OF BAKING SODA IN A GLASS OF
WATER. PRESS FINGERS TO BACK OF TONGUE TO INDUCE VOMITING. IMMED
CONTACT MD.
Fire Fighting
Flash Point:50.0F,10.0C
Lower Limits:6%
Upper Limits:36.5%
Extinguishing Media:CO2, DRY CHEMICAL, ALCOHOL FOAM.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
PROTECTIVE EQUIPMENT .
Accidental Release
Spill Release Procedures:TAKE UP W/ABSORBENT MATERIAL. VENTILATE AREA.
ELIMINATE ALL IGNITION SOURCES.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:STORE IN SEALED CONTAINER IN COOL, DRY
LOCATION. KEEP AWAY FROM OXIDIZERS. KEEP AWAY FROM IGNITION
SOURCES.
Other Precautions:AVOID EYE OR SKIN CONTACT. AVOID BREATHING VAPORS.
Exposure Controls
Respiratory Protection:NIOSH/MSHA APPROVED FACE MASK WITH ORGANIC VAPOR
CANISTER.
Ventilation:USE ONLY IN WELL VENTILATED AREA.
Protective Gloves:RUBBER GLOVES.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.
Chemical Properties
HCC:F5
Boiling Pt:B.P. Text:149F,65C
Melt/Freeze Pt:M.P/F.P Text:-144F,-98C
Vapor Pres:100MM
Vapor Density:1.10C
Spec Gravity:0.790
Evaporation Rate & Reference:>1 (ETHER=1)
Solubility in Water:100%
Appearance and Odor:COLORLESS LIQUID.
Percent Volatiles by Volume:100
Stability
Stability Indicator/Materials to Avoid:YES
OXIDIZING AGENTS, CHROMIC ANHYDRIDE, LEAD PERCHLORATE, PERCHLORIC
ACIDS.
Disposal
Waste Disposal Methods:COMPLY WITH ALL APPLICABLE FEDERAL, STATE, OR
LOCAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.