Product ID:1 SHOT FLUORESCENT COLORS
MSDS Date:12/01/1990
FSC:8010
NIIN:00N018324
MSDS Number: BLFMX

CONSUMERS PAINT FACTORY INC

5300 W 5TH AVE
GARY, IN 46406
US

Emergency Phone: 219-949-1684;800-424-9300(CHEMTREC)

Info Phone: 800-854-6813

Cage: 13294

CONSUMERS PAINT FACTORY INC

6398 GARY, IN 46406-1563 US

Telephone: 219-949-1684/800-424-9300(CHEMTREC)

Cage: 13294

PRODUCT SUBJECT TO SARA TITLE III, SEC 313 & 40 CFR372.

RTECS: 9999999ZZ

AROMATIC HYDROCARBONS

Fraction By Weight: 1-5%

OSHA PEL 100 PPM (MFR)

ACGIH TLV: 100 PPM (MFR)

ISOPROPYL ALCOHOL (SARA III)

CAS: 67-63-0

RTECS: NT8050000

Fraction By Weight: .1-1%

OSHA PEL 400 PPM/500 STEL

ACGIH TLV: 400 PPM/500STEL;9192

MINERAL SPIRITS (LIMITS AS STODDARD SOLVENT)

CAS: 64475-85-0

RTECS: PY8240000

Fraction By Weight: 30-40%

OSHA PEL 100 PPM

ACGIH TLV: 100 PPM

1,2,4-TRIMETHYLBENZENE (SARA III)

CAS: 95-63-6

RTECS: DC3325000

Fraction By Weight: .1-1%

OSHA PEL 25 PPM

ACGIH TLV: 25 PPM; 9192

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: INHAL: CAN CAUSE IRRIT OF THE
RESP TRACT/HDACH/NAUS/CNS DEPRESS/FATG OR UNCON. INGEST: SEVERE GI
DISTURBANCES CAN OCCUR INCLUDING NAUS/VOMIT/ANOREXIA/CONSTIP. ASPIR
OF THIS PROD INTO THE LUNGS CAN CAUSE CHEM PNEUM WHICH MAY BE
FATAL. EYES: CAN CAUSE SEVERE IRRIT/REDNESS/TEARING & BLURRED (EFTS
OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZ: VISION. CONJUNCT/CORNEAL INJURY MAY
ALSO RSLT. SKIN: CAN CAUSE IRRIT/DRYING. MAY ALSO CAUSE DERMAT/
ULCERATIONS. CHRONIC: INHAL/INGEST: PRLNG OVEREXPOS TO SOLVENTS CAN
CAUSE KIDNEY/LIVER & O THER SYSTEMIC DMG. EXPOS TO SOLVENTS FOR
PRLNG TIMES AT MOD LEVELS CAN AFFECT HIGHER BRAIN FUNCTIONS/MENTAL
CAPACITY.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid:INHAL: IF OVERCOME BY VAPS, REMOVE TO FRESH AIR. IF NOT
BRTHG, GIVE O2/ARTF RESP. GET MED HELP OR MD IMMED. EYE: FLUSH
W/LARGE QTYS OF WATER FOR A MINIMUM OF 15 MIN. GET MED HELP OR MD
IMMED. SKIN: RE MOVE EXCESS MATL W/PAPER TOWELS OR RAGS. WASH
W/MILD SOAP & WARM WATER. IF ANY REDNESS/SWELLING PERSISTS, GET MED
ATTN. INGEST: DO NOT INDUCE VOMITING. GET MED HELP OR MD IMMED.

Flash Point Method:PMCC
Flash Point:82.0F,27.8C
Lower Limits:1%
Extinguishing Media:CARBON DIOXIDE, DRY CHEMICAL, FOAM, WATER FOG.
Fire Fighting Procedures:WATER SPRAY MAY BE INEFFECTIVE BUT SHLD BE
USED TO COOL CONTRS EXPOS TO FIRE. WEAR NIOSH/MSHA APPRVD SCBA &
FULL PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:AVOID SOURCES OF IGNITION/FLAME/STATIC
ELECTRICITY/HEAT/ELEC SPARK. CONTRS SHLD BE GROUNDED WHEN POURING.
ALL ELEC EQUIP/INSTALLATIONS SHLD BE MADE (SUPP DATA)

Spill Release Procedures:ELIMINATE ALL HEAT SOURCES, OPEN FLAMES &
OTHER SOURCES OF IGNITION. ABSORB W/SOLID ABSORBENT. SHOVEL INTO
CONTRS. IF LARGE QUANTITIES ARE SPILLED, PERSONAL PROTECTIVE
EQUIPMENT MAY BE REQUIRED.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:SECURE CLOSURES & KEEP CONTRS UPRIGHT
TO PREVENT LEAKAGE. STORE IN COOL, WELL-VENTILATED AREA AWAY FROM
HEAT, SPARKS, & OPEN FLAMES.
Other Precautions:AVOID FREE FALL OF LIQUID IN EXCESS OF A FEW INCHES.
DO NOT FLAME CUT/BRAZE/WELD W/OUT NIOSH/MSHA APPRVD MECH FILTER
RESP OR APPROP/ADEQ VENT. IF WORKERS ARE EXPOSED TO SPRAY APPLICATN
OR ABRASIVE BLA ST CLEANING, ENGINEERING & (SUPP DATA)

Respiratory Protection:NIOSH/MSHA APPROVED ORGANIC VAPOR RESPIRATOR
WITH PARTICULATE FILTER.
Ventilation:LOC EXHAUST: PREFERRED - PAINT SPRAY BOOTH, 150 FPM FACE
VELOCITY. MECH (GEN): ACCEPTABLE FOR SMALL VOLUME APPLICATIONS.
Protective Gloves:BUTYL RUBBER OR EQUIVALENT.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:NONE.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
EXPLO HAZ: & GROUNDED I/A/W THE NATL ELEC CODE. WORKERS ARE REQD TO USE
ONLY NON-FERROUS TOOLS & WEAR NON-SPARKING SHOES IN AREAS WHERE
EXPLOSION HAZARDS EXIST. OTHER PREC: ADMINISTRATIVE CTLS MUST BE
USED TO MAINTAIN AN EXPOSURE LEVEL BELOW THE OSHA REQD LEVEL, OR,
USE A NISOH/MSHA APPRVD MECH FILTER RESP FOR PROT.

HCC:F4
Boiling Pt:B.P. Text:320F,160C
Vapor Pres:5-10.3
Vapor Density:4.3-4.8
Spec Gravity:0.79-0.87
Evaporation Rate & Reference:.10-.13 (BUTYL ACETATE=1)
Solubility in Water:INSOLUBLE
Appearance and Odor:WATER WHITE LIQUID & CHARACTERISTIC PETROLEUM ODOR.
Percent Volatiles by Volume:30-40

Stability Indicator/Materials to Avoid:YES
AVOID CONTACT WITH STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:EXCESSIVE HEAT.
Hazardous Decomposition Products:CO, CO2, NOX, ALDEHYDE, SMOKE.

Waste Disposal Methods:DISPOSE AS PAINT WASTE IN ACCORDANCE WITH
FEDERAL, STATE, AND LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.