Product ID:UPOL A;UPOL C; UPOL D; UPOL E; TOPSTOP PART
MSDS Date:07/08/1991
FSC:8040
NIIN:00N018627
Kit Part:Y
MSDS Number: BLFVD

W DAVID & SONS LIMITED

DENINGTON ROAD DENINGTON INDUS ESTATE
WELLINGBOROUGH
EN

Emergency Phone: 0933-224-201

Info Phone: 0933-224-201

Cage: K7427

W DAVID & SONS LIMITED

WELLINGBOROUGH EN

Telephone: 0933-224-201

Cage: K7427

FROM MAIN WORKING AREA &, MOST IMPORTANT,

RTECS: 9999999ZZ

NONE OF OUR PROD CONTAIN ANY FORM OF

RTECS: 9999999ZZ

FILLER PASTES CAN BE CLASSIFIED AS "NUISANCE"

RTECS: 9999999ZZ

HISTORY OF LITTLE ADVERSE EFTS ON LUNGS & DO NOT

RTECS: 9999999ZZ

EXPOS ARE KEPT UNDER REASONABLE CONTROL. 3.

RTECS: 9999999ZZ

FILLERS), "IN EXCESSIVE QTYS", IS CONSIDERED

RTECS: 9999999ZZ

PROVIDE PROPER WORKING METHS/MACHINERY TO MIN

RTECS: 9999999ZZ

EH40, 3H42, EH44.

RTECS: 9999999ZZ

DOWN BE CARRIED OUT BY PERSONNEL PROPERLY PROT

RTECS: 9999999ZZ

STYRENE

CAS: 100-42-5

Fraction By Weight: 12%

OSHA PEL 100 PPM

ACGIH TLV: S,50PPM/100STEL;9293

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

INCORPORATING DUST EXTRACTOR & FINISH JOB USING

RTECS: 9999999ZZ

W/BODY FILE, & THEN FINISH JOB W/WET & DRY PAPER.

RTECS: 9999999ZZ

DUST WILL BE PRDCE WHILE RUBBING DOWN IN

RTECS: 9999999ZZ

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:MAY CAUSE IRRIT ON PRLNGD CONTACT.
EYE: MAY CAUSE IRRIT & SORENESS. INHAL: PRLNGD INHAL MAY CAUSE
DROW. TOXICITY: FILLER PASTES CONTAINING STYRENE CAUSE IRRIT OF
EYES, SKIN & RESP TRACT. NO DETRIMENTA L EFTS TO HLTH ARE KNOWN
WHERE PROD IS HNDLD/USED PROPERLY & GOOD HYGIENE STANDARDS ARE
PRACTICED. (SEE EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:HLTH HAZ: MAIN HAZ LIKELY TO BE ENCOUNTERED
DURING FINISHING OPER IS PROD OF DUST CLOUDS. DUST FROM ANY SOURCE
IN RIGHT CONC MUST BE REGARDED AS POTENTIAL DANGER TO HLTH. IT IS,
THEREFORE, OF PARAMOUN T IMPORTANCE THAT DUST CLOUDS ARE KEPT TO
ABSOLUTE MIN. OUT FILLER PASTES HAVE BEEN SPECIALLY FORMULATED
(SUPP DATA)
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid:SKIN: WASH AFFECTED AREA WITH WARM SOAPY WATER. EYE: IRRIGATE
W/COPIOUS QUANTITIES OF CLEAN WATER AND SEEK MEDICAL AID
IMMEDIATELY. INHAL: PATIENT SHOULD SEEK FRESH AIR IMMEDIATELY. IF
CONDITION PERSI STS THEREAFTER OBTAIN MEDICAL ADVICE WITHOUT DELAY.
INGEST: MILK SHOULD NOT BE DRUNK. DO NOT INDUCE VOMITING, SEEK
MEDICAL AID.

Flash Point:89.6F,32.0C
Lower Limits:1.1%
Upper Limits:6.1%
Extinguishing Media:MEDIA SUITABLE FOR SURROUNDING CONDITIONS.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA & FULL PROTECTIVE
EQUIPMENT .
Unusual Fire/Explosion Hazard:NONE SPECIFIED BY MANUFACTURER.

Spill Release Procedures:NOT DANGEROUS-WIPE OR SCRAPE AWAY.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:IN ORIGINAL CLOSED CONTAINERS IN COOL
AREA AND KEPT AWAY FROM ALL SOURCES OF IGNITION.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.

Respiratory Protection:WHEN SANDING: NIOSH/MSHA APPROVED DUST PARTICLE
MASK.
Ventilation:GOOD WORKSHOP VENTILATION.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:BARRIER CREAM RECOMMENDED. PERSONS WHO
SUFFER SKIN COMPLAINTS OR OTHER ALLERGIC EFTS SHOULD NOT WORK WITH
PRODUCT.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
EFTS OF OVEREXP: TO BE RUBBED DOWN WET. WHEN USING METH SURF WILL AIR
DRY IN <30 SECONDS. MANY EXPERTS CONSIDER THAT THIS WILL RSLT IN
BETTER FINISH & OBVIATE DUST PROBLEM. 1. TO AVOID DUST & GET BEST
USE FROM OUT PRODS WE SUGGEST EITHER OF FOLLOWING WORK METHS:- A.
TAKE OFF EXCESS BODYFILLER W/SANDER (SEE INGRED 2)

HCC:F4
Vapor Density:1.7-1.8
Solubility in Water:MINIMAL.
Appearance and Odor:PALE GREY,PALE BLUE,METALLIC GREY OR BEIGE, PUTTY
LIKE, CHARACT OF STYRENE ODOR
Percent Volatiles by Volume:12(WT)

Stability Indicator/Materials to Avoid:YES
NONE (IF PRODUCT STORED AND HANDLED CORRECTLY).
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:NONE (IF PRODUCT STORED AND HANDLED
CORRECTLY).

Waste Disposal Methods:DISPOSE IN ACCORDANCE WITH FEDERAL, STATE, AND
LOCAL REGULATIONS .

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.