BLGLT - TIMESAVER LAPPING COMPOUNDS #100N VERY FINE

  • MSDS: BLGLT
  • Manufacturer: TIMESAVER PRODUCTS CO
  • Product Name: TIMESAVER LAPPING COMPOUNDS #100N VERY FINE
  • National Stock Number: 5350-00N019226
Product Identification

Product ID:TIMESAVER LAPPING COMPOUNDS #100N VERY FINE
MSDS Date:01/16/1989
FSC:5350
NIIN:00N019226
MSDS Number: BLGLT

Responsible Party
TIMESAVER PRODUCTS CO
12428 HWY 99
EVERETT, WA 98204
US

Emergency Phone: 206-347-1611

Info Phone: 206-347-1611

Preparer: A J MENARD

Cage: 2K985

Contractor
TIMESAVER PRODUCTS CO
EVERETT, WA 98204-5502 US

Telephone: 206-347-1611

Cage: 2K985

Ingredients

SILICA, CRYSTALLINE - QUARTZ

CAS: 14808-60-7

RTECS: VV7330000

Fraction By Weight: 20-45%

OSHA PEL SEE TABLE Z3

ACGIH TLV: 0.1 MG/M3 RDUST;9293


ABRASIVES; (GROUND NATURAL)

Fraction By Weight: 20-35%


BARIUM SULFATE

CAS: 7727-43-7

RTECS: CR0600000

Fraction By Weight: 25-40%

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST; 9293


DETERGENT

Fraction By Weight: 5-25%

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:YES OSHA:NO
Health Hazards Acute and Chronic:PROLONGED OVEREXPOSURE TO RESPIRABLE
SILICA ABOVE THE THRESHOLD LIMIT MAY CAUSE SCARRING OF THE LUNGS
W/COUGHING, SHORTNESS OF BREATH OR SILICOSIS.
Explanation of Carcinogenicity:CRYSTALLINE SILICA: CLASS 2A (IARC)
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:ASTHMA, EMPHYSEMA, GASTROENTITIS.

First Aid

First Aid:INGEST: CALL MD IMMEDIATELY . INHAL: REMOVE TO FRESH AIR.
SUPPORT BREATHING (GIVE O2/ARTF RESP) . EYES: IMMEDIATELY FLUSH
EYES W/POTABLE WATER FOR A MINIMUM OF 15 MINUTES, SEEK ASSISTANCE
FROM MD . SKIN: FLUSH W/COPIOUS AMOUNTS OF WATER. CALL MD .

Fire Fighting

Extinguishing Media:WATER FOG OR FLOOD.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:FUME, VAPOR & DUST MAY OCCUR & ARE
CONSIDERED TOXIC. THE PRODUCT OR DUST CAN REACT WITH STRONG
OXIDIZING AGENTS.

Accidental Release

Spill Release Procedures:VACUUM CLEAN. DO NOT BROOM SWEEP. KEEP IN
CLOSED CONTAINER UNTIL DISPOSAL.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:KEEP IN A CLOSED CONTAINER IN A DRY
PLACE. DO NOT PERMIT CONTACT WITH ACIDS, ALKALIES OR STRONG
OXIDIZING AGENTS.
Other Precautions:AVOID BREATHING DUST.

Exposure Controls

Respiratory Protection:WHEN NECESSARY, USE NIOSH/MSHA APPROVED DUST
RESPIRATOR, HEPA FILTER.
Ventilation:LOCAL EXHAUST IN FRONT OF WORKER. MECHANICAL (GEN) NORMAL
AIRBORNE DUST REMOVAL. OSHA APPROVED IF OVER TLV LIMITS.
Protective Gloves:DESIRABLE; NOT NECESSARY.
Eye Protection:DESIRABLE; NOT NECESSARY.
Other Protective Equipment:IF PRLNG EXPOS TO DUST ABOVE TLV LEVELS,
DISPOSABLE COVERALLS.
Work Hygienic Practices:WASH HANDS BEFORE EATING OR SMOKING.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

Chemical Properties

HCC:N1
Spec Gravity:2.3
Solubility in Water:INSOLUBLE
Appearance and Odor:ODORLESS WHITE POWDER.

Stability

Stability Indicator/Materials to Avoid:YES
ACIDS AND OXIDIZING AGENTS.
Stability Condition to Avoid:NONE.
Hazardous Decomposition Products:WHEN HEATED TO DECOMPOSITION,
COMPOUNDS EMIT SUFLUR DIOXIDE.

Disposal

Waste Disposal Methods:SANITARY LANDFILL OR OTHER EPA APPROVED METHOD.
DISPOSAL MUST BE IN ACCORDANCE WITH FEDERAL, STATE, AND LOCAL
REGULATIONS .

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.