BLHBJ - TONER FOR USE IN MITA COPIERS GTC CODE, 41
- MSDS: BLHBJ
- Manufacturer: GRAPHIC TECHNOLOGIES CORP
- Product Name: TONER FOR USE IN MITA COPIERS GTC CODE, 41
- National Stock Number: 6850-00N020075
Product Identification
Product ID:TONER FOR USE IN MITA COPIERS GTC CODE, 41
MSDS Date:06/27/1988
FSC:6850
NIIN:00N020075
MSDS Number: BLHBJ
Responsible Party
CANOGA PARK, CA 91304
US
Emergency Phone: 800-432-5162
Info Phone: 800-432-5162
Cage: 56489
Contractor
Telephone: 800-432-5162
Cage: 56489
Ingredients
STYRENE ACRYLATE COPOLYMER
CAS: 25153-46-2
Fraction By Weight: 60-75%
ACRYLIC ACID BUTYL ESTER POLYMER WITH
CAS: 25767-47-9
Fraction By Weight: 5-10%
POLYOLEFIN
CAS: 9017-47-9
Fraction By Weight: <5%
METAL COMPLEX AZO DYE
CAS: 85179-66-8
Fraction By Weight: 1%
CARBON BLACK
CAS: 1333-86-4
RTECS: FF5800000
Fraction By Weight: <10%
OSHA PEL 3.5 MG/M3
ACGIH TLV: 3.5 MG/M3; 9192
SILICA, AMORPHOUS FUMED (MFR CAS# 7631-86-9)
CAS: 112945-52-5
RTECS: VV7310000
Fraction By Weight: <1%
OSHA PEL 6 MG/M3 TDUST
ACGIH TLV: 10 MG/M3 TDUST
POLYVINYLIDENE FLUORIDE POLYMER (MFR CAS# 24937-79-9)
CAS: 24973-79-9
Fraction By Weight: <1%
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:NONE SPECIFIED BY MANUFACTURER.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:NONE
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
First Aid
First Aid:EYE:IN CASE OF CONTACT, FLUSH WITH WATER FOR AT LEAST 15
MINUTES. SKIN:WASH WITH SOAP AND WATER. INHAL:REMOVE FROM EXPOSURE.
REMOVE TO FRESH AIR. SUPPORT BREATHING (GIVE O2/ARTF RESP) .
INGEST: DRINK TWO GLASSES OF MILK OR WATER AND CONTACT POSION
CONTROL CENTER.
Fire Fighting
Extinguishing Media:WATER, FOAM, OR DRY CHEMICAL
Fire Fighting Procedures:NONE. WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:AS WITH ALL ORGANIC DUST, THIS PRODUCT
MAY PRESENT AN EXPOSION HAZARD IF HIGH DUST CONCENTRATIONS AND
SOURCE OF IGNITION ARE PRESENT.
Accidental Release
Spill Release Procedures:COLLECT SPILLED MATERIAL WITHOUT BREATHING
AIRBORNE DUST. SPRAY SPILL WITH WATER IF NECESSARY.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:STORE BELOW 95F.
Other Precautions:AVOID EYE CONTACT. AVOID BREATHING DUST.
Exposure Controls
Respiratory Protection:NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE FOR
EXPOSURE OF CONCERN .
Ventilation:NONE SPECIFIED BY MANUFACTURER.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:NONE SPECIFIED BY MANUFACTURER.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
Chemical Properties
HCC:N1
Solubility in Water:INSOLUBLE
Appearance and Odor:BLACK POWDER, SLIGHT ODOR.
Percent Volatiles by Volume:NONE
Stability
Stability Indicator/Materials to Avoid:YES
NONE.
Stability Condition to Avoid:NONE.
Hazardous Decomposition Products:CARBON MONOXIDE, CARBON DIOXIDE, AND
CARBON PARTICLES. COMBUSTION AND SOURCES OF IGNITION ARE PRESENT.
Disposal
Waste Disposal Methods:DISPOSAL SHOULD BE IN ACCORDANCE WITH APPLICABLE
REGULATION; FEDERAL, STATE, OR LOCAL.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.