BLHSJ - DAMAR VARNISH GLOSS, 645

  • MSDS: BLHSJ
  • Manufacturer: M GRUMBACHER INC
  • Product Name: DAMAR VARNISH GLOSS, 645
  • National Stock Number: 8010-00N020104
Product Identification

Product ID:DAMAR VARNISH GLOSS, 645
MSDS Date:09/09/1987
FSC:8010
NIIN:00N020104
MSDS Number: BLHSJ

Responsible Party
M GRUMBACHER INC
30 ENGELHARD DRIVE
CRANBURY, NJ 08512
US

Emergency Phone: 609-655-8282

Info Phone: 609-655-8282

Cage: FO948

Contractor
M GRUMBACHER INC
CRANBURY, NJ 08512 US

Telephone: (609) 655-8282

Cage: FO948

Ingredients

TURPENTINE

CAS: 8006-64-2

RTECS: YO8400000

Fraction By Weight: 14%

OSHA PEL 100 PPM

ACGIH TLV: 100 PPM; 9192


METHYL CHLOROFORM (1,1,1-TRICHLOROEHANE) (SARA III)

CAS: 71-55-6

RTECS: KJ2975000

Fraction By Weight: 58%

OSHA PEL 350 PPM/450 STEL

ACGIH TLV: 350 PPM/450STEL;9192

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS


PROPANE

CAS: 74-98-6

RTECS: TX2275000

Fraction By Weight: 15%

OSHA PEL 1000 PPM

ACGIH TLV: ASPHYXIANT; 9192


RESIN MIXTURE; (DAMAR RESIN)

Fraction By Weight: 5%

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:MAY CAUSE DIZZINESS OR NARCOSIS IN
HIGH VAPOR CONCENTRATIONS. WILL CAUSE DEFATTING OF SKIN. EFFECTS
ARE REVERSIBLE. LONG TERM EXPOSURE(YEARS) MAY CAUSE LUNG, LIVER OR
KIDNEY DAMAGE. INHAL: DIFFICULTY IN BREATHING. SKIN: REDNESS.
INGEST: VOMIT. CHLOROCARBON MATERIALS HAVE PRODUCED/SENSIT OF (SEE
EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:HLTH HAZ: THE MYOCARDIUM TO EPINEPHRINE IN LAB
ANIMALS AND COULD HAVE SIMILAR EFFECT IN HUMANS. ADRENOMIMETICS
(E.G., EPINEPHRINE) MAY BE CONTRAINDICATED EXCEPT FOR
LIFE-SUSTAINING USES IN HUMANS ACUT ELY/CHRONICALLY EXPOSED TO
CHLOROCARBONS .
Medical Cond Aggravated by Exposure:HEART DISEASE.

First Aid

First Aid:INHAL: GIVE O2. INGEST: DO NOT INDUCE VOMIT. GASTRIC LAVAGE.
EYES: WASH WITH WATER FOR AT LEAST 15 MIN. SKIN: WASH WITH SOAP AND
WATER.

Fire Fighting

Flash Point Method:TCC
Flash Point:-40F,-40C
Lower Limits:1.8%
Upper Limits:12.0%
Extinguishing Media:USE WATER FOG, DRY CHEMICAL OR CARBON DIOXIDE.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED PRESSURE DEMAND SCBA
AND FULL PROTECTIVE EQUIPMENT . AEROSOL CANS MAY RUPTURE WHEN
HEATED.
Unusual Fire/Explosion Hazard:HEATED CANS MAY BURST. THERMAL
DECOMPOSITION PRODUCTS MAY INCLUDE HCL & PHOSGENE .

Accidental Release

Spill Release Procedures:USE ABSORBENT SWEEPING COMPOUND TO SOAK UP
MATERIAL. PUT INTO CONTAINER. DISPOSE AS HAZARDOUS WASTE.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:KEEP AWAY FROM HEAT, SPARKS, OR OPEN
FLAME. STORE AT TEMPERATURES BELOW 110F.
Other Precautions:NO SMOKING IN AREA OF USE. DO NOT USE IN GENERAL
VICINITY OF ARC WELDING, OPEN FLAMES OR HOT SURFACES. HEAT AND/OR
UV RADIATION MAY CAUSE FORMATION OF HCL AND/OR PHOSGENE .

Exposure Controls

Respiratory Protection:USE NIOSH/MSHA APPROVED SCBA IF ABOVE TLV LIMIT
EXCEEDING.
Ventilation:LOCAL EXHAUST.
Protective Gloves:NONE REQUIRED IF SPRAYING.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:LONG SLEEVE AND LONG PANTS.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

Chemical Properties

HCC:V3
Boiling Pt:B.P. Text:-40F,-40C
Vapor Pres:40
Vapor Density:4.0 >AIR
Spec Gravity:0.7
Evaporation Rate & Reference:0.7(BUYTL ACETATE=1)
Solubility in Water:NONE
Appearance and Odor:CLEAR-SOLVENT ODOR.

Stability

Stability Indicator/Materials to Avoid:YES
NONE.
Stability Condition to Avoid:HIGH TEMPERATURES; PRESSURIZED PRODUCT
SHOULD RUPTURE ABOVE 110F.
Hazardous Decomposition Products:IN FIRE, FORMS PHOSGENE, HYDROCHLORIC
ACID & HCL.

Disposal

Waste Disposal Methods:DISPOSE AS HAZARDOUS WASTE IN ACCORDANCE WITH
EPA RCRA. DISPOSE OF IN ACCORDANCE WITH FEDERAL, STATE AND LOCAL
REGULATIONS .

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.