BLKCD - PLASTICIZER

Product Identification

Product ID:PLASTICIZER
MSDS Date:08/30/1988
FSC:6810
NIIN:00N019395
MSDS Number: BLKCD

Responsible Party
VAN WATERS & ROGERS INC
1600 NORTON BLDG
SEATTLE, WA 98104-1564
US

Emergency Phone: 800-424-9300 (CHEMTREC)

Info Phone: 206-447-5911

Cage: DO735

Contractor
VAN WATERS AND ROGERS INC., UNIVAR CORP.
SEATTLE, WA 98104-1564 US

Telephone: 206-447-5911/800-424-9300(CHEMTREC)

Cage: 87664

Ingredients

DIBUTYL PHTHALATE (SARA III)

CAS: 84-74-2

RTECS: TI0875000

Fraction By Weight: >90%

OSHA PEL 5 MG/M3

ACGIH TLV: 5 MG/M3; 9192

EPA Report Quantity: 10 LBS

DOT Report Quantity: 10 LBS


INERT INGREDIENTS

Fraction By Weight: BALANCE


SORBENT MATL & PLACE RESIDUE IN DOT-APPRVD WASTE

RTECS: 9999999ZZ


COMPLY WITH ALL APPLICALBE GOVT REGS ON SPILL

RTECS: 9999999ZZ


WEATHER, TO RELIEVE PRESS. ELECTRICALLY

RTECS: 9999999ZZ


TOOLS. KEEP CONTR TIGHTLY CLSD WHEN NOT IN USE. DO

RTECS: 9999999ZZ


NOT GET IN EYES, ON SKIN, OR CLOTHING. DO NOT CUT,

RTECS: 9999999ZZ

Hazards

LD50 LC50 Mixture:LD50:ORAL(RAT)12 G/KG
Routes of Entry: Inhalation:NO Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: INHAL/SKIN/EYE/INGEST: NONE
CURRENTLY KNOWN. CHRONIC: NO SPECIFIC INFORMATION AVAILABLE.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE REPORTED.

First Aid

First Aid:INHAL:REMOVE TO FRESH AIR. GIVE ARTF RESP IF NOT BRTHG. GET
IMMED MED ATTN. EYE:IMMED FLUSH W/LOTS OF RUNNING H2O FOR @ LST 15
MIN, LIFTING LIDS OCCAS. GET IMMED MED ATTN. SKIN:IMMED WASH
W/SOAP/ H2O. REMOVE CONTAMD CLTHG/SHOES;WASH BEFOREREUSE. GET MED
ATTN IF IRRIT PERSISTS AFTER WASHING. INGEST:IF CONSCIOUS, IMMED
INDUCE VOMIT BY GIVING 2 GLASSES OF H2O & STICKING FINGER DOWN
THROAT.(SUPDAT

Fire Fighting

Flash Point Method:TCC
Flash Point:>200F,>93C
Extinguishing Media:USE WATER SPRAY, DRY CHEMCAL, CO2, OR ALCOHOL FOAM.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT . USE WATER SPRAY TO COOL NEARBY CONTAINERS
AND STRUCTURES EXPOSED TO FIRE.
Unusual Fire/Explosion Hazard:EXTINGUISH ALL NEARBY SOURCES OF
IGNITION.

Accidental Release

Spill Release Procedures:SPILL/LEAK:WEAR PROT EQUIP INCL RUBBER
BOOTS/GLOVES/APRON & A SCBA IN PRESS DEMAND MODE/A SUPPLIED-AIR
RESP. SM SPILL:FULL FACEPIECE AIR-PURIFYING CARTRIDGE RESP EQUIPPED
FOR ORG VAP MAY BE SATIS. ANY EVENT, ALWAYS WEAR EYE PROT. EXTING
ALL (SUPDAT)
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:KEEP AWAY FROM HEAT/SPARKS/FLAMES.
STORE IN COOL/DRY WELL-VENTD PLACE AWAY FROM INCOMP MATL. VENT
CONTR FREQUENTLY, & MORE OFTEN IN WARM (ING 5)
Other Precautions:CONTAINRS, EVEN THOSE THAT HAVE BEEN EMPTIED, WILL
RETAIN PRODUCT RESIDUE AND VAPORS. ALWAYS OBEY HAZARD WARNINGS AND
HANDLE EMPTY CONTAINERS AS IF THEY WERE FULL.

Exposure Controls

Respiratory Protection:WEAR NIOSH/MSHA APPROVD RESPIRATOR APPROPRIATE
FOR THOSE EMISSION LEVELS. APPROP RESP MAY BE FULL FACEPIECE/HALF
MASK AIR- PURIFYING CARTRIDGE RESP EQUIPPED FOR ORGANIC VAP/MIST,
SCBA IN PRESSURE DEMA ND MODE, OR SUPPLIED-AIR RESPIRATOR.
Ventilation:LOCAL MECHANICAL EXHAUST VENTILATION CAPABLE OF MAINTAINING
EMISSIONS @ POINT OF USE BELOW PEL.
Protective Gloves:RUBBER GLOVES.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:LONG-SLEEVED SHIRT, TROUSERS, SAFETY SHOES,
RUBBER APRON. AN EYEWASH AND SAFETY SHOWER SHOULD BE NEARBY & READY
FOR USE.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
FIRST AID PROC:GET IMMED MED ATTN. DO NOT GIVE ANYTHING BY MOUTH TO AN
UNCON/CONVL PERSON. SPILL PROC:IGNIT SOURCES. SM
SPILL/DRIP:MOP/WIPE UP & DISPOSE OF IN DOT-APPRVD WASTE CONTR. LG
SPILL: CNTN BY DIKING W/SOIL OR OTHER NON-COMB SORBENT MATL & THEN
PUMP INTO DOT- APPRVD WASTE CONTR; OR ABSORB W/NON-COMBUST (ING 3)

Chemical Properties

HCC:N1
Boiling Pt:B.P. Text:375F,191C
Vapor Pres:1
Spec Gravity:1.048
Evaporation Rate & Reference:NIL(BUTYL ACETATE=1)
Solubility in Water:NEGLIGIBLE
Appearance and Odor:YELLOWISH OILY LIQUID OF LOW ODOR.

Stability

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS.
Stability Condition to Avoid:HEAT, SPARKS, AND OPEN FLAMES.
Hazardous Decomposition Products:MAY LIBERATE CARBON MONOXIDE AND
CARBON DIOXIDE.

Disposal

Waste Disposal Methods:DISPOSE OF CONTAMD PROD/MATL USED IN CLEANING UP
SPILLS/LEAKS IN MANNER APPRVD FOR MATL. CONSULT APPROP FED/ST/LOC
REGULATORY AGENCIES TO ASCERTAIN PROPER DISP PROC. EMPTY CONTR CAN
HAVE RESIDUES/GASE S/MISTS & ARE SUBJECT TO PROPER WASTE DISPOSAL.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.