BLKJR - GTC TONER MITA COPIERS GTC CODE, 417
- MSDS: BLKJR
- Manufacturer: GRAPHIC TECHNOLOGIES CORP
- Product Name: GTC TONER MITA COPIERS GTC CODE, 417
- National Stock Number: 6850-00N020559
Product Identification
Product ID:GTC TONER MITA COPIERS GTC CODE, 417
MSDS Date:07/29/1988
FSC:6850
NIIN:00N020559
MSDS Number: BLKJR
Responsible Party
CANOGA PARK, CA 91304-0006
US
Emergency Phone: 800-432-5162
Info Phone: 800-432-5162
Cage: 56489
Contractor
Telephone: 800-432-5162
Cage: 56489
Ingredients
STYRENE ACRYLATE COPOLYMER
CAS: 25153-46-2
Fraction By Weight: 60-70%
STYRENE-ACRYLIC COPOLYMER
CAS: 25767-47-9
Fraction By Weight: 5-10%
POLYOLEFIN
CAS: 9017-48-5
Fraction By Weight: <5%
METAL COMPLEX AZO DYE
CAS: 85179-66-8
Fraction By Weight: 1%
CARBON BLACK
CAS: 1333-86-4
RTECS: FF5800000
Fraction By Weight: <10%
OSHA PEL 3.5 MG/M3
ACGIH TLV: 3.5 MG/M3; 9192
SILICON DIOXIDE, AMORPHOUS; (AMORPHOUS SILICA)
CAS: 7631-86-9
Fraction By Weight: <1%
OSHA PEL 6 MG/M3 (TDUST)
ACGIH TLV: 10 MG/M3 (TDUST)
POLYVINYLIDENE FLUORIDE POLYMER
CAS: 24973-79-9
Fraction By Weight: <1%
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:NONE SPECIFIED BY MANUFACTURER.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:NONE SPECIFIED BY MANUFACTURER.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
First Aid
First Aid:EYES: IN CASE OF CONTACT, FLUSH WITH WATER FOR AT LEAST 15
MINUTES. SKIN: WASH WITH SOAP AND WATER. INHAL: REMOVE FROM
EXPOSURE. INGEST: DRINK TWO GLASSES OF MILK OR WATER AND CONTACT MD
OR POISON CON TROL CENTER.
Fire Fighting
Extinguishing Media:WATER, FOAM, OR DRY CHEMICAL.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:AS WITH ALL ORGANIC DUSTS, THIS PRODUCT
MAY PRESENT AN EXPLOSION HAZARD IF HIGH DUST CONCENTRATIONS AND A
SOURCE OF IGNITION ARE PRESENT.
Accidental Release
Spill Release Procedures:COLLECT SPILLED MATERIAL WITHOUT CREATING
AIRBORNE DUST. SPRAY SPILL WITH WATER IF NECESSARY.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:STORE BELOW 95F.
Other Precautions:AVOID EYE CONTACT. AVOID BREATHING DUST.
Exposure Controls
Respiratory Protection:NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE FOR
EXPOSURE OF CONCERN .
Ventilation:NONE SPECIFIED BY MANUFACTURER.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:NONE SPECIFIED BY MANUFACTURER.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.
Chemical Properties
HCC:N1
Spec Gravity:1.0
Solubility in Water:INSOLUBLE
Appearance and Odor:BLACK POWDER, SLIGHT ODOR.
Percent Volatiles by Volume:NONE
Stability
Stability Indicator/Materials to Avoid:YES
NONE
Stability Condition to Avoid:NONE
Hazardous Decomposition Products:CO, CO2, AND CARBON PARTICLES.
COMBUSTION PRODUCTS ARE TOXIC, AVOID.
Disposal
Waste Disposal Methods:DISPOSAL SHOULD BE IN ACCORDANCE WITH APPLICABLE
REGULATIONS; FEDERAL, STATE AND LOCAL.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.