Product ID:EPK 0151 PART A
MSDS Date:01/15/1991
FSC:8040
NIIN:01-201-3697
Kit Part:Y
MSDS Number: BLLFQ

DEXTER CORP HYSOL DIV

164 FOLLY MILL RD
SEABROOK, NH 03874
US

Emergency Phone: 603-474-5541/800-424-9300(CHEMTREC)

Info Phone: 603-474-5541

Preparer: KEN DECOSTA

Cage: 1JB33

DEXTER CORP THE HYSOL DIV

SEABROOK, NH 03874 US

Telephone: 603-474-5545

Cage: 1JB33

N-BUTYL GLYCIDYL ETHER (BGE)

CAS: 2426-08-6

RTECS: TX4200000

OSHA PEL 50 PPM

ACGIH TLV: 25 PPM; 9293

SILICA, AMORPHOUS (FILLER PARTICLES ARE THOROUGHLY WETTED

CAS: 112945-52-5

RTECS: VV7310000

OSHA PEL 20 MPPCF

*MATERIAL IS SUBSEQUENTLY GROUND, MACHINED OR SANDED).

RTECS: 9999999ZZ

Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:MAY CAUSE SKIN IRRITATION AND POSSIBLE
ALLERGIC REACTIONS. PROLONGED AND REPEATED CONTACT MAY CAUSE
SENSITIZATION WHICH WILL RESULT IN ALLERGIC REACTIONS.
Explanation of Carcinogenicity:N/K OBSERVE CAUTIONS MAY RESULT IN
EXCESSIVE HEAT BUILD-UP WITH THE RELEASE OF TOXIC GASES.
Effects of Overexposure:SKIN RASH/IRRITATION.

First Aid:FLUSH SKIN AND EYE CONTACT WITH PLENTY OF WATER. WASH SKIN
THOROUGHLY WITH SOAP AND WATER, RUBBING ALCOHOL OR HAND CLEANER. DO
NOT USE SOLVENTS. REMOVE SOILED CLOTHING AND WASH BEFORE RE- USE.
IF IRRI TATION PERSISTS, SEE PHYSICIAN.

Flash Point Method:TCC
Flash Point:200F,93C
Lower Limits:.4
Upper Limits:1.3
Extinguishing Media:DRY CHEMICAL OR HALON FIRE EXTINGUISHER, WATER
SPRAY, FOAM OR FOG.
Fire Fighting Procedures:USE SELF-CONTAINED BREATHING APPARATUS WHEN
FIGHTING FIRES IN CONFINED AREAS.
Unusual Fire/Explosion Hazard:DENSE SMOKE AND TOXIC GASES MAY BE
LIBERATED.

Spill Release Procedures:SCRAPE UP AND TRANSFER TO METAL CONTAINER.
WIPE UP REMAINING RESIDUE WITH SOLVENTS, OBSERVING SOLVENT
FLAMMABILITY CAUTIONS OR USE DETERGENT.

Handling and Storage Precautions:KEEP COOL IN ACCORDANCE WITH LABEL
INSTRUCTIONS.
Other Precautions:FOLLOW RECOMMENDED CURING SCHEDULE.

Respiratory Protection:NOT REQUIRED WITH GOOD INDUSTRIAL VENTILATION.
Ventilation:LOCAL EXHAUST RECOMMENDED, MECHANICAL ACCEPTABLE.
Protective Gloves:IMPERVIOUS PLASTIC OR RUBBER.
Eye Protection:SAFETY GLASSES OR GOGGLES.
Other Protective Equipment:AS NEEDED TO PROTECT SKIN AND CLOTHING.
Supplemental Safety and Health
KEY1;T6.

HCC:B2
Boiling Pt:B.P. Text:284F,140C
Vapor Pres:<2
Vapor Density:3.8
Spec Gravity:1.15
Evaporation Rate & Reference:>1
Solubility in Water:<1%
Appearance and Odor:TRANSLUCENT, THIXOTROPIC LIQUID WITH SWEET,
PLEASANT ODOR.

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS, STRONG LEWIS OR MINERAL ACIDS.
Hazardous Decomposition Products:CO, NOX, ALDEHYDES, ACIDS AND
UNDETERMINED ORGANICS.
Conditions to Avoid Polymerization:AVOID MIXING RESIN/CURING AGENT IN
BATCHES >1LB. DO NOT HEAT MAT'L UNLESS CURING SURFACES TO BE
BONDED. FAILURE TO

Waste Disposal Methods:DISPOSE OF AS HAZARDOUS WASTE ACCORDING TO DOT
HAZARD CLASS. IF NOT REGULATED BY DOT, DISPOSE OF AS ORM-E.
DISPOSAL METHOD CAN BE LAND BURIAL OR CHEMICAL INCINERATION.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.