BLLPD - WATER BASE TAN BLOCKOUT INK 1301601
- MSDS: BLLPD
- Manufacturer: DIAGRAPH CORP
- Product Name: WATER BASE TAN BLOCKOUT INK 1301601
- National Stock Number: 7510-00N021059
Product Identification
Product ID:WATER BASE TAN BLOCKOUT INK 1301601
MSDS Date:06/26/1991
FSC:7510
NIIN:00N021059
MSDS Number: BLLPD
Responsible Party
US
Emergency Phone: 618-997-3321
Info Phone: 618-997-3321
Preparer: W R MCMILLEN
Cage: IO074
Contractor
Telephone: 618-997-3321
Cage: IO074
Ingredients
SOLVENT NAPHTHA (PETROLEUM); (PETROLEUM SOLVENT)
CAS: 64742-95-6
Fraction By Weight: 0-20%
ACGIH TLV: 400 PPM (MFR)
AMMONIUM HYDROXIDE (SARA III)
CAS: 1336-21-6
RTECS: BQ9625000
Fraction By Weight: 0-20%
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
Hazards
LD50 LC50 Mixture:SEE INGREDIENT 2
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: SKIN: MAY CAUSE DERMATITIS &
IRRITATION. EYE: MAY CAUSE IRRITATION & BLURRED VISION. INHAL: MAY
CAUSE RESPIRATORY IRRITATION. INGEST: MAY CAUSE GASTROINTESTINAL
IRRITATION, NAUSEA, & DIARRHEA. CHRONIC: CAN CAUSE CHEMICAL
PNEUMONITIS.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
First Aid
First Aid:SKIN: WASH W/SOAP & WATER. EYES: FLUSH W/ WATER FOR A MINIMUM
OF 15 MINUTES, CALL MD. INHAL: PROVIDE FRESH AIR & REST, CALL MD.
INGEST: INDUCE VOMITING, CALL MD.
Fire Fighting
Flash Point Method:CC
Flash Point:200F,93C
Extinguishing Media:ALCOHOL FOAM, CO2, DRY CHEMICAL, WATER FOG, WATER.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:NONE SPECIFIED BY MANUFACTURER.
Accidental Release
Spill Release Procedures:REMOVE ALL SOURCES OF IGNITION. ABSORB ON
INERT MATERIAL.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:STORE IN COOL, DRY PLACE AWAY FROM ALL
SOURCES OF IGNITION.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.
Exposure Controls
Respiratory Protection:USE NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE
FOR EXPOSURE OF CONCERN .
Ventilation:NEEDED TO KEEP VAPOR CONCENTRATION BELOW T.L.V. LEVEL.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:CLOTHING: USE AS NEEDED. OIL RESISTANT
FOOTWEAR.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.
Chemical Properties
HCC:N1
Boiling Pt:B.P. Text:212F,99C
Melt/Freeze Pt:M.P/F.P Text:32F,0C
Vapor Pres:15
Vapor Density:LOWER/AIR
Spec Gravity:1.27
pH:7.5
Evaporation Rate & Reference:SLOWER THAN BUTYL ACETATE
Appearance and Odor:BROWN LIQUID, MILD ODOR.
Percent Volatiles by Volume:65(WT)
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:NONE.
Hazardous Decomposition Products:CO2, CO, HYDROCARBONS.
Disposal
Waste Disposal Methods:COMPLY WITH FEDERAL, STATE, AND LOCAL
REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.