BLLYM - BRIDGING ENCAPSULANT, FOSTER 32-32
- MSDS: BLLYM
- Manufacturer: H B FULLER CO
- Product Name: BRIDGING ENCAPSULANT, FOSTER 32-32
- National Stock Number: 8030-01-289-3891
Product Identification
Product ID:BRIDGING ENCAPSULANT, FOSTER 32-32
MSDS Date:12/14/1988
FSC:8030
NIIN:01-289-3891
MSDS Number: BLLYM
Responsible Party
VADNAIS HEIGHTS, MN 55110
US
Emergency Phone: 612-481-3300
Info Phone: 612-481-3300
Cage: 0HD19
Contractor
Telephone: 612-481-3300
Cage: 0HD19
Ingredients
PARAFFIN WAX, CHLORINATED; (CHLORINATED PARAFFIN).
CAS: 63449-39-8
RTECS: RV0450000
Fraction By Weight: 1-10%
ALPHA-ALUMINA (ALUMINUM OXIDE) (EPA LISTS ONLY FIBROUS
CAS: 1344-28-1
RTECS: BD1200000
Fraction By Weight: 10-20%
OSHA PEL 15 MG/M3 TDUST
ACGIH TLV: 10 MG/M3 TDUST; 9293
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:NO Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYES: DIRECT CONTACT WITH THE PRODUCT
MAY CAUSE IRRITATION. SKIN: PRLNG/RPTD CONTACT WITH LIQUID PRODUCT
MAY CAUSE IRRITATION. INHAL: NO EXPECTED EFFECTS. CHRONIC:
OVEREXPOSURE TO CHLORINATED PARAFFIN MAY CREATE CANCER RISK.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NO KNOWN EFFECTS ON OTHER
ILLNESSES.
First Aid
First Aid:EYE: FLUSH IMMEDIATELY W/WATER FOR A MINIMUM OF 15 MINUTES.
CONSULT MD IF IRRITATION PERSISTS. SKIN: WASH AFFECTED AREA W/SOAP
& WATER. LAUNDER CONTAMINATED CLOTHING BEFORE REUSE. INHAL: REMOVE
SUBJEC T TO FRESH AIR. INGEST: CALL MD IMMEDIATELY .
Fire Fighting
Flash Point Method:PMCC
Flash Point:>200F,>93C
Extinguishing Media:NON-FLAMMABLE IN LIQUID STATE; USE WATER SPRAY,
FOAM, DRY CHEMICAL OR CO*2 ON DRIED PRODUCT.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:THERE IS THE POSSIBLITY OF PRESSURE
BUILDUP IN CLOSED CONTAINERS WHEN HEATED. WATER SPRAY MAY BE USED
TO COOL THE CONTAINERS.
Accidental Release
Spill Release Procedures:DIKE IF NECESSARY, CONTAIN SPILL W/INERT
ABSORBENT & TRANSFER TO CONTAINERS FOR DISPOSAL. KEEP OUT OF
SEWERS, WATERSHEDS OR WATER SYSTEMS.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:PROTECT FROM FREEZING - PRODUCT
STABILITY MAY BE AFFECTED. AVOID TEMPERATURE EXTREMES IN STORAGE.
Other Precautions:THIS LIQUID PROD CONTAINS MATL IDENTIFIED BY THE
ACGIH AS A NUISANCE PARTICULATE. IN USE, THE MATL WILL NOT PRESENT
AN EXPOS RISK. ONCE THE PROD HAS DRIED & IS ABRADED/DISTURBED,
DUSTING MAY OCCUR. TH IS PROD CONTAINS TOXIC CHEM (SUPP DATA)
Exposure Controls
Respiratory Protection:NOT NORMALLY REQUIRED. IF NECESSARY, USE
NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE FOR EXPOSURE OF CONCERN
.
Ventilation:STANDARD INDUSTRIAL VENTILATION.
Protective Gloves:RUBBER GLOVES.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:HAVE EYE WASHES AVAILABLE WHERE EYE CONTACT
CAN OCCUR. PREVENT PRLNG/RPTD CONTACT BY USING APPROPRIATE
PROTECTIVE CLTHG.
Work Hygienic Practices:LAUNDER CONTAMINATED CLOTHING BEFORE REUSE.
Supplemental Safety and Health
WASTE DISP METH: FOR ADDL WASTE DISPOSAL ASSISTANCE, CONSULT MFR
ENVIRONMENTAL SERVICES. OTHER PREC: SUBJECT TO THE REPORTING REQS
OF SEC 313 OF TITLE III OF SARA & 40 CFR 372.
Chemical Properties
Boiling Pt:B.P. Text:>200F,>93C
Vapor Pres:SEE INGRED
pH:8
Solubility in Water:MISCIBLE
Appearance and Odor:LIQUID
Stability
Stability Indicator/Materials to Avoid:YES
NOT ESTABLISHED.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:INCOMPLETE COMBUSTION CAN YIELD LOW
MOLECULAR WEIGHT HYDROCARBONS, CO, HYDROGEN CHLORIDE, PHOSGENE.
Disposal
Waste Disposal Methods:THIS PROD DOES NOT MEET THE DEFINITION OF HAZ
WASTE UNDER THE U.S. EPA HAZ WASTE REGS 40 CFR 261. STATE OR LOCAL
HAZARDOUS WASTE REGS MAY APPLY IF THEY ARE DIFFERENT FROM THE
FEDERAL REG. SOLIDIFY & D ISPOSE OF IN AN APPRVD INDUS LANDFILL.
(SUPP DATA)
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.