BLMKK - BURKEPOXY PRIMER PART A

  • MSDS: BLMKK
  • Manufacturer: BURKE CO
  • Product Name: BURKEPOXY PRIMER PART A
  • National Stock Number: 8040-00N021385
Product Identification

Product ID:BURKEPOXY PRIMER PART A
MSDS Date:10/03/1989
FSC:8040
NIIN:00N021385
Kit Part:Y
MSDS Number: BLMKK

Responsible Party
BURKE CO
2655 CAMPUS DR
SAN MATEO, CA 94403
US

Emergency Phone: 213-834-3401

Info Phone: 415-349-7600

Cage: 0KM49

Contractor
BURKE CO
SAN MATEO, CA 94403 US

Telephone: 415-349-7600

Cage: 0KM49

Ingredients

EPOXY RESIN

CAS: 25068-38-6

RTECS: KC2100000


EPICHLOROHYDRIN (SARA III)

CAS: 106-89-8

RTECS: TX4900000

OSHA PEL S, 5 PPM

ACGIH TLV: S, 2 PPM; 9293

EPA Report Quantity: 100 LBS

DOT Report Quantity: 100 LBS


N-BUTYL GLYCIDYL ETHER (BGE)

CAS: 2426-08-6

RTECS: TX4200000

OSHA PEL 50 PPM

ACGIH TLV: 25 PPM; 9293

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:(ACUTE) SKIN IRRITATION. (CHRONIC)
SKIN IRRITATION.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:IRRITATION, SENSITIZATION AND DERMATITIS.
Medical Cond Aggravated by Exposure:SKIN IRRITATION.

First Aid

First Aid:INHAL: REMOVE TO FRESH AIR AREA. EYES: FLUSH WITH PLENTY OF
WATER FOR AT LEAST 15 MINUTES. SKIN: WASH WITH SOAP AND WATER. DO
NOT USE SOLVENT. INGEST: GIVE A LOT OF WATER, CONSULT MD.

Fire Fighting

Flash Point Method:PMCC
Flash Point:>200F,>93C
Extinguishing Media:FOAM, CO2, DRY CHEMICAL.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:NONE KNOWN.

Accidental Release

Spill Release Procedures:RECOVER FREE LIQUID OR PASTE, USING ABSORBENT
IF NECESSARY.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:AVOID CONTACT WITH EYES, SKIN, OR
CLOTHING. DO NOT BREATHE VAPOR.
Other Precautions:NONE

Exposure Controls

Respiratory Protection:NIOSH/MSHA APPROVED CHEMICAL CARTRIDGE
RESPIRATOR.
Ventilation:LOCAL EXHAUST: RECOMMENDED. MECHANICAL: RECOMMENDED.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:NONE
Work Hygienic Practices:WASH HANDS BEFORE HANDLING FOOD. WASH CLOTHES
BEFORE REUSE.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

Chemical Properties

HCC:N1
Boiling Pt:B.P. Text:400F,204C
Vapor Pres:0.03 @ 77C
Spec Gravity:1.12
Solubility in Water:NIL
Appearance and Odor:STRAW COLOR, EPOXY ODOR.

Stability

NONE SPECIFIED BY MANUFACTURER.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:CO, CO2, NITROGEN COMPOUNDS,
ALDEHYDES.
Conditions to Avoid Polymerization:STRONG ACIDS OR BASES.

Disposal

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH FEDERAL, STATE AND
LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.