BLMMN - I-TECH
- MSDS: BLMMN
- Manufacturer: INTERNATIONAL ENVIRONMENT TECHNOLOGIES LTD
- Product Name: I-TECH
- National Stock Number: 8030-00N021578
Product Identification
Product ID:I-TECH
MSDS Date:03/22/1989
FSC:8030
NIIN:00N021578
MSDS Number: BLMMN
Responsible Party
GRAND RAPIDS, MI 49505
US
Emergency Phone: 616-453-8869
Info Phone: 616-453-8869
Cage: HO647
Contractor
Telephone: 616-453-8869
Cage: HO647
Ingredients
STYRENE-ETHYLENE/BUTYLENE-STRYENE BLOCK COPOLYMER
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:AVAILABLE DATA & EXPERIENCE SHOW
POTENTIAL FOR SLIGHT IRRITATION TO EYES. SLIGHT ORAL TOXICITY.
PRODUCT MAY BE SLIGHTLY IRRITATING TO EYES. ORAL TOXICITY IS LOW.
THERMAL DECOMP MAY PRODUCE TOXIC/IRRIT ATING GASES OR FUMES.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:NONE SPECIFIED BY MANUFACTURER.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
First Aid
First Aid:EYE:FLUSH EYES WITH WATER. IF IRRITATION OCCURS, CONSULT
PHYSICIAN. BURNS:TREAT AS FOR ORDINARY BURNS. INGEST:CALL MD
IMMEDIATELY . INHAL:REMOVE TO FRESH AIR. SUPPORT BREATHING (GIVE
O2/ARTF RES P) . SKIN:FLUSH WITH COPIOUS AMOUNTS OF WATER .
Fire Fighting
Extinguishing Media:WATER FOG, FOAM, DRY CHEMCIAL, CO2
Fire Fighting Procedures:COOL EXPOSED CNTNRS. AVOID EXPOS TO PRODUCTS
OF THERMAL DECOM. WEAR NIOSH/MSHA APPRVD SCBA AND FULL PROT EQUIP .
MATL WILL NOT BURN UNLESS PREHEATED.
Unusual Fire/Explosion Hazard:NONE KNOWN.
Accidental Release
Spill Release Procedures:RECOVER SOLID WITH BROOM, SHOVEL OR VACCUM.
AVOID GENERATING DUST CLOUDS. PUT RECOVERED MATERIAL IN CONTAINERS
FOR RECLAMATION OR DISPOSAL.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:PRODUCT CAN ACCUMULATE STATIC CHARGES
WHEN HANDLED.
Other Precautions:AVOID BREATHING VAPORS FROM HEATED PRODUCT.
Exposure Controls
Respiratory Protection:NORMALLY NOT REQUIRED. USE NIOSH/MSHA APPROVED
SCBA IF PRODUCT IS HEATED OR INVOLVED IN FIRE.
Ventilation:NO SPECIAL REQUIREMENT.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:NONE REQUIRED
Work Hygienic Practices:WASH WITH SOAP AND WATER AFTER PROLONGED
CONTACT.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.
Chemical Properties
HCC:N1
Spec Gravity:0.91
Solubility in Water:NEGLIGIBLE
Appearance and Odor:SOLID, GENERALLY IN POWDER FORM, ESSENTIALLY
ODORLESS.
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS
Stability Condition to Avoid:EXTREME HEAT, OPEN FLAME
Hazardous Decomposition Products:CO, CO2. MAY PRODUCE ACROLEIN, ACIDS,
KETONES, ALDEHYDES. TREAT COMBUSTION PRODUCTS AS TOXIC.
Disposal
Waste Disposal Methods:FOLLOW FEDERAL, STATE AND LOCAL REGULATIONS.
WHEN USED AS ABSORBENT, FOLLOW REGULATIONS FOR ABSORBED MATERIAL.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.