BLMWV - SOLID INSURE, 10207

  • MSDS: BLMWV
  • Manufacturer: ECOLAB INC
  • Product Name: SOLID INSURE, 10207
  • National Stock Number: 7930-01-209-6918
Product Identification

Product ID:SOLID INSURE, 10207
MSDS Date:03/28/1990
FSC:7930
NIIN:01-209-6918
MSDS Number: BLMWV

Responsible Party
ECOLAB INC
370 WABASHA ST
ST PAUL, MN 55102
US

Emergency Phone: 800-328-0026

Info Phone: 612-293-2233

Cage: 0DAC4

Contractor
ECOLAB PROFESSIONAL PRODUCTS DIVISION OF ECOLAB INC.
ST PAUL, MN 55102 US

Telephone: 800-352-5326

Cage: 85884

Ingredients

SODIUM HYPOCHLORITE (SARA III)

CAS: 7681-52-9

RTECS: NH3486300

Fraction By Weight: 3%

EPA Report Quantity: 100 LBS

DOT Report Quantity: 100 LBS


SILICIC ACID (H2SI03), DISODIUM SALT (SODIUM METASILICATE)

CAS: 6834-92-0

RTECS: VV9275000

Fraction By Weight: 25%

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:NO Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:SKIN AND EYES: CAUSES SEVERE CHEMICAL
BURNS. EYE CONTACT MAY CAUSE BLINDNESS. HARMFUL SKIN CONTACT MAY
CAUSE IMMED PAIN. INGEST: HARMFUL OR FATAL. CAUSES CHEMICAL BURNS
OF MOUTH, THROAT AND STOMACH.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid

First Aid:EYES:IMMED FLUSH W/PLENTY OF COOL RUNNING H*2O FOR @ LST 15
MIN HOLD LIDS APART TO ENSURE RINSING OF ENTIRE EYE. REMOVE CONT
LENSES. CALL PHYS IMMED. SKIN:IMMED FLUSH W/PLENTY OF COOL RUNNING
H*2O FOR @ LST 15 MIN WHILE REMOVING CONTAMD CLTHG/SHOES. WASH
CLTHG BEFORE REUSE. INGEST:REMOVE MOUTH @ ONCE: THEN DRINK 1 OR 2
LG GLASSES OF H*2O/MILK. DO NOT INDUCE VOMIT. NEVER GIVE ANYTHING
BY (SUPDAT)

Fire Fighting

Extinguishing Media:MEDIA SUITABLE FOR SURROUNDING FIRE .
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT . PRODUCT DOES NOT SUPPORT COMBUSTION.
Unusual Fire/Explosion Hazard:NONE.

Accidental Release

Spill Release Procedures:CLEANUP: FLUSH ANY SPILLS TO DRAIN WITH PLENTY
OF WATER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:KEEP OUT OF REACH OF CHILDREN.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.

Exposure Controls

Respiratory Protection:NONE SPECIFIED BY MANUFACTURER. USE NIOSH/MSHA
APPROVED RESPIRATOR APPROPRIATE FOR EXPOSURE OF CONCERN .
Ventilation:NONE SPECIFIED BY MANUFACTURER.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:CHEM WORK GOG & FULL LENGTH FSHLD.
Other Protective Equipment:NONE SPECIFIED BY MANUFACTURER.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
FIRST AID PROC: MOUTH TO AN UNCON PERSON. CALL POISON CONTROL CENTER OR
PHYS IMMED.

Chemical Properties

HCC:D4
pH:11
Solubility in Water:COMPLETE
Appearance and Odor:WHITE SOLID; FAINT CHLORINE ODOR.

Stability

Stability Indicator/Materials to Avoid:YES
NONE SPECIFIED BY MANUFACTURER.
Stability Condition to Avoid:REACTS VIOLENTLY WITH ACIDS.
Hazardous Decomposition Products:NONE SPECIFIED BY MANUFACTURER.

Disposal

Waste Disposal Methods:CONSULT STATE, FEDERAL AND LOCAL AUTHORITIES FOR
RESTRICTIONS ON DISPOSAL OF CHEMICAL WASTE.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.