BLRXW - POTASSIUM CYANIDE ACS
- MSDS: BLRXW
- Manufacturer: SIGMA CHEMICAL CO
- Product Name: POTASSIUM CYANIDE ACS
- National Stock Number: 6810-00N021649
Product Identification
Product ID:POTASSIUM CYANIDE ACS
MSDS Date:06/19/1989
FSC:6810
NIIN:00N021649
MSDS Number: BLRXW
Responsible Party
US
Emergency Phone: 314-771-5765
Info Phone: 800-325-8070
Cage: 21076
Contractor
Telephone: 314-771-5765
Cage: 21076
Ingredients
FOR METAL CARBONYLS, RXN SHOULD BE CARRIED OUT UNDER
RTECS: 9999999ZZ
POTASSIUM CYANIDE (SARA III)
CAS: 151-50-8
RTECS: TS8750000
OSHA PEL 5 MG/M3 (CN)
ACGIH TLV: S, 5 MG/M3 (CN);9192
EPA Report Quantity: 10 LBS
DOT Report Quantity: 10 LBS
NITROGEN TRICHLORATE PLUS AMMONIA.
RTECS: 9999999ZZ
ANY SOLIDS FOR BURIAL IN CHEM LANDFILL.
RTECS: 9999999ZZ
BURIAL. ADDNL EQUIVALENTS OF HYPOCHLORITE MAY BE
RTECS: 9999999ZZ
Hazards
LD50 LC50 Mixture:LD50:ORAL(RAT)5 MG/KG.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE:MAY BE FATAL IF INHALED,
SWALLOWED, OR ABSORBED THRU SKIN. CAUSES IRRITATION. EXPOSURE CAN
CAUSE:NAUSEA, DIZZINESS & HEADACHE. LUNG IRRITATION. CYANOSIS.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
First Aid
First Aid:EYES:IMMED FLUSH W/COPIOUS AMTS OF H2O FOR AT LST 15 MIN.
SKIN:IMMED FLUSH W/COPIOUS AMTS OF H2O FOR AT LST 15 MIN WHILE
REMOVING CONTAM CLTHG & SHOES. INHAL:REMOVE TO FRESH AIR. IF NOT
BRTHG GIVE ART F RESP. IF BRTHG IS DFCLT, GIVE O2. INGEST:CALL MD
IMMED . IN CASE OF EXPOSURE, GET MD IMMED. DISCARD CONTAM CLTHG &
SHOES.
Fire Fighting
Extinguishing Media:ALCOHOL OR POLYMER FOAM. DO NOT USE CO2
EXTINGUISHER ON THIS MATERIAL.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
PROTECTIVE EQUIPMENT . USE WATER SPRAY TO COOL FIRE-EXPOSED
CONTAINERS.
Unusual Fire/Explosion Hazard:EMITS TOX FUMES UNDER FIRE CNDTNS. WATER
SPRAY CAN BE USED TO FIGHT FIRE IN AREA CNTNG POTASSIUM CYANIDE &
TO COOL FIRE-EXPOSED METAL CNTNRS. HOWEVER, (SUPDAT)
Accidental Release
Spill Release Procedures:EVACUATE AREA. WEAR NIOSH/MSHA APPROVED SCBA,
RUBBER BOOTS & HVY RUBBER GLOVES. SWEEP UP, PLACE IN BAG & HOLD FOR
WASTE DISP. AVOID RAISING DUST. VENT AREA & WASH SPILL SITE AFT
MATL PICKUP IS COMPLET E.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:DO NOT BREATHE DUST. DO NOT GET IN
EYES, ON SKIN, ON CLTHG. READILY ABSORBED THRU SKIN. HIGHLY TOXIC.
IRRITANT. KEEP TIGHTLY CLOSED.
Other Precautions:AIR & MOISTURE SENSITIVE. STORE IN DRY AREA. PRODUCT
IS SUBJECT TO SARA SECTION 313 REPORTING REQUIREMENTS.
Exposure Controls
Respiratory Protection:WEAR APPROPRIATE NIOSH/MSHA APPROVED RESPIRATOR.
Ventilation:USE ONLY IN CHEMICAL FUME HOOD.
Protective Gloves:CHEMICAL-RESISTANT GLOVES.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:OTHER PROTECTIVE CLOTHING. SAFETY SHOWER &
EYE BATH.
Work Hygienic Practices:WASH THOROUGHLY AFTER HANDLING.
Supplemental Safety and Health
EXPLO HAZ:DIRECT CNTCT OF MATL W/H2O OR STEAM WILL CAUSE DECOMP
LIBERATING HIGHLY TOX HYDROGEN CYANIDE GAS AS WELL AS GENERATING
HIGHLY HAZ SOLN OF DISSOLVED CYANIDE WHICH MUST BE KEPT OUT OF
SEWERS & WATERCOURSES. POTASSIUM CYANIDE HAS BEEN FOUND TO FORM
EXPLO MIXT SOMETIMES SPONT W/CHLORATES, NITRATES & (INGRED 2)
Chemical Properties
HCC:T2
Melt/Freeze Pt:M.P/F.P Text:1174F,635C
Spec Gravity:1.52
Appearance and Odor:WHITE GRANULAR POWDER
Stability
STRONG OXIDIZING AGENTS. AVOID CONTACT W/ACID. MAY DECOMPOSE ON
EXPOSURE TO MOIST AIR OR WATER. ABSORBS CO2 FROM AIR.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:TOXIC FUMES OF:HYDROGEN CYANIDE, CO,
CO2 & NOX.
Disposal
Waste Disposal Methods:TREAT A DILUTE BASIC SOLN (PH 10-11) OF MATL
W/50% EXCESS OF COMMERCIAL LAUNDRY BLEACH. CONTROL TEMP BY ADDN
RATE OF BLEACH & ADJUST PH IF NEC. LET STAND OVERNIGHT. CAUTIOUSLY
ADJUST SOLN TO PH 7. VIG OROUS EVOLUTION OF GAS MAY OCCUR. FILTER
(ING 3)
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.