BLSVX - RTV106

  • MSDS: BLSVX
  • Manufacturer: GE SILICONES
  • Product Name: RTV106
  • National Stock Number: 8030-01-287-8356
Product Identification

Product ID:RTV106
MSDS Date:05/12/1991
FSC:8030
NIIN:01-287-8356
MSDS Number: BLSVX

Responsible Party
GE SILICONES
260 HUDSON RIVER RD
WATERFORD, NY 12188
US

Emergency Phone: 518-237-3330

Info Phone: 518-237-3330

Preparer: DA POLSINELLI

Cage: GESIL

Contractor
GENERAL ELECTRIC CO, SILICONE PRODUCTS BUSINESS DEPT
WATERFORD, NY 12188 US

Telephone: 518-237-3330/800-332-3390

Cage: 01139

Ingredients

SILANE, METHYLTRIACETOXY-; (METHYLTRIACETOXYSILANE)

CAS: 4253-34-3

RTECS: VV4500000

Fraction By Weight: 1-5%


DIMETHYL POLYSILOXANE SILANOL/ST

CAS: 70131-67-8

Fraction By Weight: 10-30%


POLYDIMETHYLSILOXANE SILANOL/STPD

CAS: 70131-67-8

Fraction By Weight: 30-60%


TRADE SECRET COMPONENT

Fraction By Weight: 10.4%


TRADE SECRET COMPONENT

Fraction By Weight: 10-30%

OSHA PEL 15 MG/M3 (MFR)

ACGIH TLV: 15 MG/M3 (MFR)

Hazards

LD50 LC50 Mixture:LD50:(ORAL,RAT) >40 G/KG (ING 2,3 & 4)
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INGEST: MAY BE HARMFUL IF SWALLOWED.
SKIN: UNCURED PRODUCT CONTACT WILL IRRITATE LIPS, GUMS AND TONGUE.
UNCURED PRODUCT CONTACT MAY IRRITATE THE SKIN. INHAL: CAUSES
IRRITATION OF THE MOUTH, NOSE, AND THROAT. APPLIES ONLY IN UNCURED
STATE. EYE: UNCURED PRODUCT CONTACT IRRITATES EYES. CHRONIC: NONE
KNOWN.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE KNOWN.

First Aid

First Aid:INGEST: RINSE MOUTH WITH WATER SEVERAL TIMES. SKIN: TO CLEAN
FROM SKIN, REMOVE COMPLETELY WITH A DRY CLOTH OR PAPER TOWEL BEFORE
WASHING WITH DETERGENT AND WATER. INHAL: MOVE PERSON TO FRESH AIR.
EYES : IN CASE OF CONTACT, IMMEDIATELY FLUSHEYES WITH PLENTY OF
WATER FOR AT LEAST 15 MIN AND GET MED ATTN IF IRRITATION PERSISTS.

Fire Fighting

Extinguishing Media:ALL STANDARD FIREFIGHTING MEDIA.
Fire Fighting Procedures:NONE KNOWN. WEAR NIOSH/MSHA APPROVED SCBA AND
FULL PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:NONE SPECIFIED BY MANUFACTURER.

Accidental Release

Spill Release Procedures:WIPE, SCRAPE OR SOAK UP IN AN INERT MATERIAL
AND PUT IN A CONTAINER FOR DISPOSAL. WASH WALKING SURFACES WITH
DETERGENT AND WATER TO REDUCE SLIPPING HAZARD. WEAR PROPER
PROTECTIVE EQUIPMENT AS SPECIFIE D IN THE PROTECTIVE EQUIPMENT
SECTION.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:KEEP CNTNR CLSD WHEN NOT IN USE. AVOID
CNTCT W/SKIN & EYES. CAUTION! REMOVE CNTCT LENSES BEFORE USING
SEALANT. UNCURED PROD IRRIT EYES/MAY IRRIT SKIN.
Other Precautions:DO NOT HNDL LENSES UNTIL ALL SEALANT HAS BEEN CLEANED
FROM FINGERTIPS/NAILS/CUTICLES. RESIDUAL SEALANT MAY REMAIN ON
FINGERS FOR SEVERAL DAYS & TRANSFER TO LENSES & CAUSE SEVERE EYE
IRRIT. PROD RELEAS ES ACETIC ACID DURING (SUPP DATA)

Exposure Controls

Respiratory Protection:USE IN A WELL VENTILATED AREA. WEAR NIOSH/MSHA
APPROVED RESPIRATOR APPROPRIATE FOR EXPOSURE OF CONCERN .
Ventilation:USE ONLY IN WELL VENTILATED AREA. MECHANICAL VENT TO STAY
BELOW TLV OF 10 PPM ACETIC ACID.
Protective Gloves:CLOTH GLOVES.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:EYEWASH STATIONS.
Work Hygienic Practices:REMOVE CONTACT LENSES BEFORE USING SEALENT.
Supplemental Safety and Health
OTHER PREC: APPLICATION AND CURING. USE IN A WELL VENTILATED AREA TO
PREVENT IRRITATION BY VAPORS.

Chemical Properties

Spec Gravity:1.07
Evaporation Rate & Reference:< 1 (BUTYL ACETATE=1)
Solubility in Water:INSOLUBLE
Appearance and Odor:RED PASTE, ACETIC ACID ODOR.
Percent Volatiles by Volume:< 5

Stability

Stability Indicator/Materials to Avoid:YES
NONE KNOWN.
Stability Condition to Avoid:NONE KNOWN.
Hazardous Decomposition Products:CARBON MONOXIDE, CARBON DIOXIDE,
SILICON DIOXIDE AND ACETIC ACID.

Disposal

Waste Disposal Methods:DISPOSAL SHOULD BE MADE IN ACCORDANCE WITH
FEDERAL, STATE AND LOCAL REGULATIONS. BURY IN A LICENSED LANDFILL
OR BURN IN AN APPROVED INCINERATOR ACCORDING TO FEDERAL, STATE, AND
LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.