BLSZN - EXPLOSIVE CUTTING TAPE, ECT2063MM
- MSDS: BLSZN
- Manufacturer: NORTH AMERICAN EXPLOSIVES
- Product Name: EXPLOSIVE CUTTING TAPE, ECT2063MM
- National Stock Number: 1375-00N017403
Product Identification
Product ID:EXPLOSIVE CUTTING TAPE, ECT2063MM
MSDS Date:08/07/1990
FSC:1375
NIIN:00N017403
MSDS Number: BLSZN
Responsible Party
SIMSBURY, CT 06070
US
Emergency Phone: 203-651-2670
Info Phone: 203-651-2670
Cage: 0DRG6
Contractor
Telephone: 203-651-2670
Cage: 0DRG6
Ingredients
ETHYLENE, TETRAFLUORO-, POLYMER;(POLYTETRAFLUOROETHYLENE)
CAS: 116-14-3
RTECS: KX4025000
Fraction By Weight: 1.4%
FLEXIBLE LINER)
CAS: 7440-50-8
RTECS: GL5325000
Fraction By Weight: 85%
OSHA PEL 1 MG/M3 DUST/MIST
ACGIH TLV: 1 MG/M3 DUST/MIST
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
S-TRIAZINE,
CAS: 121-82-4
RTECS: XY9450000
Fraction By Weight: 88.2%
OSHA PEL 1.5 MG/M3, S
ACGIH TLV: 1.5 MG/M3, S
PROPENE, 2-METHYL-, POLYMERS;(POLYISOBUTYLENE)
CAS: 9003-27-4
RTECS: UD1010000
Fraction By Weight: 8.2%
SEBACIC ACID, BIS
CAS: 122-62-3
RTECS: VS1000000
Fraction By Weight: 2.2%
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:A:EXPLOS:CARE SHOULD BE TAKEN TO
MINIMIZE CONT W/SKIN, EYES, & TO PREVENT INHALATION OF PYROLYSIS
FUMES OR INGEST, EXPOSURE TO RDX HAS CAUSED EPILETIFORM
CONVULSIONS. B:FOAM: "PLASTAZOTE" FOAM IS CHEM ICALLY UNREACTIVE &
BIOLOGICALLY INERT.FOAMS CAN HAVE A MINOR ABRASIVE EFFECT ON SKIN
UNDER SOME(SEE EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:HLTH HAZ: CIRCUMSTANCES. INGEST SHOULD BE
AVOIDED, EVEN THOUGH MATERIAL IS INERT. PARTICLES MAY CAUSE
PHYSICAL IRRITATION OF EYES.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
First Aid
First Aid:A:EXPLOS:EYE:WASH W/H*2O FOR @ LST 15 MIN. SKIN: WASH W/H*2O.
INHAL: REMOVE TO FRESH AIR. SUPPORT BRTHG.(GIVE O*2/ARTF RESP) .
INGEST: ADMINISTER EMETIC: SEEK MED HELP. B:FOAM:EYE:WASH W/H*2O FO
R @ LST 15 MIN. SKIN:FLUSH W/COPIOUS AMTS OF H*2O. CALL MD . INHAL:
REMOVE TO FRESH AIR. SUPPORT BRTHG. (GIVE O*2/ARTF RESP) . INGEST:
IF FOAM HAS BEEN IN CONT W/EXPLOS, ADMINISTER(SUPDAT)
Fire Fighting
Flash Point:NONE
Lower Limits:NONE
Upper Limits:NONE
Extinguishing Media:WATER; BURNING MATERIAL MAY DETONATE UNDER SOME
CONDITIONS.
Fire Fighting Procedures:EVACUATE ALL PERSONNEL TO SAFE PLACE. FIREMAN
SHOULD NOT APPROACH FIRE. WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:THIS MATERIAL MAY BE INITIATED BY IMPACT,
FRICTION, AND ELECTROSTATIC DISCHARGE. EXPLOSION HAZARD EXISTS.
Accidental Release
Spill Release Procedures:MAY BE SWEPT UP WITH NON-METALLIC IMPLEMENT.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:TRANSPORTATION MUST BE IN ACCORDANCE
WITH FEDERAL, STATE, AND LOCAL REGULATIONS. CLASS A HIGH
EXPLOSIVES, DIVISION 1.1D.
Other Precautions:THE MATERIAL CONTAINS A HIGH EXPLOSIVE, DANGEROUS
SUBSTANCE.
Exposure Controls
Respiratory Protection:NONE. IF NECESSARY, WEAR NIOSH/MSHA APPROVED
RESPIRATOR APPROPRIATE FOR EXPOSURE OF CONCERN .
Ventilation:NONE.
Protective Gloves:RUBBER GLOVES.
Eye Protection:CHEM WRKRS GOG & FULL LGTH FSHLD.
Other Protective Equipment:NONE.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
A:EXPLOSIVE: BP:NONE. VP:N/A. MP:N/A. VAP DENS:N/A. % VOLAT:0.1%.
B:FOAM: BP:NONE. VP:N/A. MP:220. VAP DENS:N/A. % VOLAT: NIL AT
AMBIENT TEMPERATURE. FIRST AID PROC: EMETIC: SEEK MED HELP.
Chemical Properties
Boiling Pt:B.P. Text:SUPP DATA
Melt/Freeze Pt:M.P/F.P Text:SUPP DATA
Vapor Pres:SUPP DATA
Vapor Density:SUPP DATA
Solubility in Water:A:NONE B:NONE
Appearance and Odor:AN OLIVE DRAB, RUBBERY EXPLOSIVE WHICH HAS NO
DISCERNIBLE ODOR.
Percent Volatiles by Volume:SUPDAT
Stability
Stability Indicator/Materials to Avoid:YES
DO NOT STORE WITH ACIDS, ALKALIES, REDUCING AGENTS, OXIDIZING AGENTS,
AMMONIA, AMINES, PHOSPHOROUS, & ORGANIC SOLVENTS.
Stability Condition to Avoid:DO NOT SUBJECT MATERIAL TO SHEARING,
GRINDING, OR IMPACT BETWEEN HARD SURFACES. DETONATION MAY OCCUR.
Hazardous Decomposition Products:THERMAL DEGRADATION OF FOAM OCCURS AT
TEMPS APPROACHING 390F. DECOMP OCCURS AT ABOUT 575F WHEN EVOLVED
FUMES MAY IGNITE.
Disposal
Waste Disposal Methods:DISPOSE IN ACCORDANCE TO ALL LOCAL, STATE AND
FEDERAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.