BLTGH - ACETONE
- MSDS: BLTGH
- Manufacturer: MALLINCKRODT INC
- Product Name: ACETONE
- National Stock Number: 6810-00N021075
Product Identification
Product ID:ACETONE
MSDS Date:04/06/1989
FSC:6810
NIIN:00N021075
MSDS Number: BLTGH
Responsible Party
US
Emergency Phone: 314-982-5000
Info Phone: 314-982-5000
Cage: 62910
Contractor
Telephone: 908-859-2151
Cage: 62910
Ingredients
ACETONE
CAS: 67-64-1
RTECS: AL3150000
Fraction By Weight: 58.08%
OSHA PEL 1000PPM
ACGIH TLV: 750PPM/1000STEL;9293
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
GEN PREFERRED BECAUSE IT CAN CNTRL EMISSIONS OF
RTECS: 9999999ZZ
AREA.PLEASE REFER TO ACGIH DOCUMENT, "INDUSTRIAL
RTECS: 9999999ZZ
5000 LBS.
RTECS: 9999999ZZ
Hazards
LD50 LC50 Mixture:LD50: (ORAL,RAT) 9750 MG/KG.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHAL: IRRIT TO NOSE, THROAT, & MUC
MEMB. MAY CAUSE DIZZ, DULLNESS, & HDCH. NARCOTIC IN HIGH CONC.
INGEST: MAY PRDCE NARCOTIC EFTS W/OTHER SYMP PARALLELING THOSE FROM
INHAL EXPOS. SKIN: IRRIT DUE TO D EFATTING ACTION ON SKIN. MAY
CAUSE REDNESS, PAIN, DRYING AND CRACKING OF SKIN. EYE: VAPORS ARE
(SEE EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:HLTH HAZ: IRRITATING TO EYES. SPLASHES MAY
CAUSE SEVERE IRRIT, WITH REDNESS AND PAIN. CHRONIC: PROLONGED OR
REPEATED SKIN CONTACT MAY PRODUCE SEVERE IRRITATION OR DERMATITIS.
Medical Cond Aggravated by Exposure:USE OF ALCOHOLIC BEVERAGES ENHANCES
TOXIC EFFECTS.
First Aid
First Aid:INHAL: REMOVE TO FRESH AIR. IF NOT BRTHG, GIVE ARTF RESP. IF
BRTHG IS DFCLT, GIVE O2. CALL PHYS. INGEST: IF SWALLOWED, INDUCE
VOMIT IMMED BY GIVING 2 GLASSES OF H2O & STICKING FINGER DOWN
THROAT. NEVE R GIVE ANYTHING BY MOUTH TO AN UNCON PERSON. CALL PHYS
IMMED. SKIN: REMOVE ANY CONTAM CLTHG. WASH SKIN W/SOAP/MILD
DETERGENT & H2O FOR AT LEAST 15 MIN. GET MED ATTN IF IRRIT
DEVELOPS/ (SUP DATA)
Fire Fighting
Flash Point Method:CC
Flash Point:-0F,-18C
Lower Limits:2.6%
Upper Limits:12.8%
Extinguishing Media:WATER, DRY CHEMICAL, FOAM OR CARBON DIOXIDE. WATER
SPRAY MAY BE USED TO KEEP FIRE EXPOSED CONTAINERS COOL.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA & FULL PROTECTIVE
EQUIPMENT .
Unusual Fire/Explosion Hazard:ABOVE FLASH POINT, VAPOR-AIR MIXTURES ARE
EXPLOSIVE WITHIN FLAMMABLE LIMITS NOTED ABOVE.
Accidental Release
Spill Release Procedures:ISOLATE/ENCLOSE AREA OF LEAK/SPILL.REMOVE ALL
SOURCES OF IGNIT.CLEAN-UP PERSONNEL & REQ PROT CLTHG & RESP PROT
FROM VAPS. CONT & RECOVER LIQ FOR RECLAMATION WHEN POS. LRGR SPILLS
& LOT SIZES CAN BE CO LLECTED AS HAZ WASTE ATOMIZED IN SUITABLE(SUP
DAT)
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:PROT AGAINST PHYS DAMAGE.STORE IN
COOL,DRY WELL-VENT LOCATION, AWAY FROM ANY AREA WHERE FIRE HAZ MAY
BE ACUTE. OUTSIDE/DETACHED STORAGE IS PREFERRED.
Other Precautions:SEPARATE FROM OXIDIZING MATERIALS. CONTAINERS SHOULD
BE BONDED AND GROUNDED FOR TRANSFERS TO AVOID STATIC SPARKS.
STORAGE AND USE AREAS SHOULD BE NO SMOKING AREAS. USE NON-SPARKING
TOOLS AND EQUIPMENT .
Exposure Controls
Respiratory Protection:IF TLV'S IS EXCEEDED A NIOSH/MSHA APPROVED FULL
FACEPIECE CHEMICAL CARTRIDGE RESP MAY BE WORN, IN GENERAL, UP TO
MAX USE CONC SPECIFIED BY RESP SUP. ALTERNATIVELY, A NIOSH/MSHA
APPRVD SUP AIR FULL FAC EPIECE RESP/AIRLINED HOOD MAY BE WORN.
Ventilation:SYS OF LOCAL &/OR GEN EXHST IS RECOM TO KEEP EMPLOYEE EXPOS
BELOW AIRBORNE EXPOS LIMITS. LOCAL EXHST VENT IS (SEE ING 2)
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:CHEM WORK GOG & FULL LGTH FACESHLD
Other Protective Equipment:IMPERVIOUS CLTHG,INCLUDING BOOTS,LAB COAT,
APRON/COVERALLS TO PVNT SKIN CONT.EYE WASH FOUNTAIN & QUICK-DRENCH
FACILITIES
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
FIRST AID PROC: PERSISTS. EYE: WASH EYES W/ PLENTY OF H2O FOR AT LEAST
15 MIN, LIFTING LOWER & UPPER EYELIDS OCCASIONALLY. GET MED ATTN
IMMED. SPILL PROC: RCRA APPRVD COMBUST CHAMBER, OR ABSORB W/VERM
ICULITE, DRY SAND, EARTH/SIMILAR MATL FOR DISP AS HAZ WASTE IN RCRA
APPRVD FACILITY. DO NOT FLUSH TO SEWER! (ING 4)
Chemical Properties
HCC:F2
Boiling Pt:B.P. Text:134F,57C
Melt/Freeze Pt:M.P/F.P Text:-139F,-95C
Vapor Pres:400 @ 103F
Vapor Density:2
Spec Gravity:0.8
Evaporation Rate & Reference:7.7 (BUTYL ACETATE=1)
Solubility in Water:MISCIBLE
Appearance and Odor:CLEAR, COLORLESS, VOLATILE LIQUID. FRAGRANT, MINT-
LIKE.
Stability
Stability Indicator/Materials to Avoid:YES
OXIDIZING MATERIALS, CHLOROFORM, ALKALIES, ACIDS, POTASSIUM T-BUTOXIDE.
Stability Condition to Avoid:HEAT.
Hazardous Decomposition Products:CARBON DIOXIDE AND CARBON MONOXIDE MAY
FORM WHEN HEATED TO DECOMPOSITION.
Disposal
Waste Disposal Methods:ENSURE COMPLIANCE WITH LOCAL, STATE AND FEDERAL
REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.