BLTKC - ETHYLENEDIAMINETETRAACETIC ACID DIPOTASSIUM

  • MSDS: BLTKC
  • Manufacturer: SIGMA CHEMICAL CO
  • Product Name: ETHYLENEDIAMINETETRAACETIC ACID DIPOTASSIUM
  • National Stock Number: 6810-00N021685
Product Identification

Product ID:ETHYLENEDIAMINETETRAACETIC ACID DIPOTASSIUM
MSDS Date:03/19/1990
FSC:6810
NIIN:00N021685
MSDS Number: BLTKC

Responsible Party
SIGMA CHEMICAL CO
ST LOUIS, MO 63178
US

Emergency Phone: 314-771-5765

Info Phone: 800-325-8070

Cage: 21076

Contractor
SIGMA CHEMICAL COMPANY
14508 ST LOUIS, MO 63178 US

Telephone: 314-771-5765

Cage: 21076

Ingredients

ETHYLENEDIAMINETETRAACETIC ACID DIPOTASSIUM

CAS: 25102-12-9

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:MAY BE HARMFUL BY INHALATION,
INGESTION, OR SKIN ABSORPTION. CAUSES EYE AND SKIN IRRITATION.
MATERIAL IS IRRITATING TO MUCOUS MEMBRANES AND UPPER RESPIRATORY
TRACT. THE CHEMICAL, PHYSICAL, AND TOXICOL OGICAL PROPERTIES HAVE
NOT BEEN THOROUGHLY INVESTIGATED.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid

First Aid:EYES: IMMED FLUSH WITH COPIOUS AMOUNTS OF WATER FOR AT LEAST
15 MIN. SKIN: IMMED WASH WITH SOAP AND COPIOUS AMOUNTS OF WATER.
INHAL: REMOVE TO FRESH AIR. IF NOT BREAHTING, GIVE O2. CALL PHYS.
WASH CON TAMINATED CLOTHING BEFORE REUSE. INGEST: CALL MD IMMED .

Fire Fighting

Extinguishing Media:WATER SPRAY, CARBON DIOXIDE, DRY CHEMICAL POWDER,
ALCOHOL OR POLYMER FOAM.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT TO PREVENT CONTACT WITH SKIN AND EYES.
Unusual Fire/Explosion Hazard:EMITS TOXIC FUMES UNDER FIRE CONDITIONS.

Accidental Release

Spill Release Procedures:WEAR SCBA, RUBBER BOOTS AND HEAVY RUBBER
GLOVES. SWEEP UP, PLACE IN A BAG AND HOLD FOR WASTE DISPOSAL. AVOID
RAISING DUST. VENTILATE AREA AND WASH SPILL SITE AFTER MATERIAL
PICKUP IS COMPLETE.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:AVOID CONTACT AND INHALATION. DO NOT
GET IN EYES, ON SKIN, ON CLOTHING. KEEP TIGHTLY CLOSED. STORE IN
COOL DRY PLACE. IRRITANT.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.

Exposure Controls

Respiratory Protection:NIOSH/MSHA APPROVED RESPIRATOR.
Ventilation:MECHANICAL EXHAUST REQUIRED.
Protective Gloves:RUBBER GLOVES.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:NONE SPECIFIED BY MANUFACTURER.
Work Hygienic Practices:WASH THOROUGHLY AFTER HANDLING.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

Chemical Properties

HCC:N1
Melt/Freeze Pt:M.P/F.P Text:522F,272C
Appearance and Odor:WHITE POWDER

Stability

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS, STRONG ACIDS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:TOXIC FUMES OF: CARBON MONOXIDE,
CARBON DIOXIDE, NITROGEN OXIDES.

Disposal

Waste Disposal Methods:DISSOLVE OR MIX MATERIAL WITH COMBUSTIBLE
SOLVENT AND BURN IN CHEMICAL INCINERATOR EQUIPPED WITH AN
AFTERBURNER AND SCRUBBER. OBSERVE ALL FEDERAL, STATE, AND LOCAL
LAWS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.