BLVRB - SYN/GARD ENAM LG, 40-36202-000
- MSDS: BLVRB
- Manufacturer: VALSPAR CORP
- Product Name: SYN/GARD ENAM LG, 40-36202-000
- National Stock Number: 8010-00N020973
Product Identification
Product ID:SYN/GARD ENAM LG, 40-36202-000
MSDS Date:01/10/1989
FSC:8010
NIIN:00N020973
MSDS Number: BLVRB
Responsible Party
MINNEAPOLIS, MN 55415
US
Emergency Phone: 800-228-5635
Info Phone: 612-332-7371
Cage: 13374
Contractor
Telephone: 612-332-7371/888-345-5732
Cage: 23526
Ingredients
HYDROTREATED LIGHT PETROLEUM DISTILLATE; (MINERAL SPIRITS).
CAS: 64742-47-8
Fraction By Weight: 30%
OSHA PEL 300 PPM;400 PPM,STEL
ACGIH TLV: 300 PPM
TITANIUM OXIDE; (TITANIUM DIOXIDE)
CAS: 13463-67-7
RTECS: XR2275000
Fraction By Weight: 25%
OSHA PEL 15 MG/M3 TDUST
ACGIH TLV: 10 MG/M3 TDUST; 9293
SILICA
CAS: 7631-86-9
Fraction By Weight: 1%
OSHA PEL 6 MG/M3 (TDUST)
ACGIH TLV: 10 MG/M3 (TDUST)
NAPHTHA, MEDIUM ALIPHATIC; (NAPHTHA). LIMITS AS VM&P
CAS: 64742-88-7
Fraction By Weight: 10%
OSHA PEL 300 PPM;400 PPM STEL
ACGIH TLV: 300 PPM
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE:HARMFUL IF INHALED. MAY AFFECT
BRAIN, NERVOUS SYSTEM OR RESPIRATORY SYSTEM, CAUSING DIZZINESS,
HEADACHE, NAUSEA OR RESPIRATORY IRRITATION. OVEREXPOSURE TO
INGREDIENTS IN PRODUCT MAY CAUSE NOSE & THROAT, EYE & SKIN
IRRITATION. CHRONIC:NOTICE:REPORTS HAVE ASSOCIATED RPTD/PRLNGD
OCCUPATIONAL (SEE EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:HLTH HAZ:OVEREXPOSURE TO SOLVENTS W/ PERMANENT
BRAIN & NERVOUS SYSTEM DAMAGE. INTENTIONAL MISUSE BY DELIBERATELY
CONCENTRATING & INHALING CONTENTS MAY BE HARMFUL OR FATAL.
Medical Cond Aggravated by Exposure:ANY RESPIRATORY OR SKIN CONDITION.
First Aid
First Aid:INHAL:REMOVE FROM EXPOSURE AREA. IF BRTHG STOPPED, USE
MOUTH-TO-MOUTH RESUSCITATION & GET MD. EYE:FLUSH W/WATER FOR AT
LEAST 15 MINUTES. SKIN:WASH W/SOAP & WATER. INGEST:GET MD
IMMEDIATELY .
Fire Fighting
Flash Point Method:TCC
Flash Point:101F,38C
Lower Limits:1%
Upper Limits:6%
Extinguishing Media:CARBON DIOXIDE, DRY CHEMICAL, FOAM, AND/OR WATER
FOG.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
PROTECTIVE EQUIPMENT . CONTAINERS EXPOSED TO FIRE SHOULD BE KEPT
COOL W/WATER SPRAY.
Unusual Fire/Explosion Hazard:CONTAINS OXIDIZING MATS. CONTAMD RAGS,
WIPES, SAWDUST, ETC., MAY CATCH FIRE SPONTANEOUSLY. STORE WASTE
UNDER WATER IN CLOSED METAL CNTNRS UNTIL (SUPP DATA)
Accidental Release
Spill Release Procedures:VENTILATE AREA. AVOID BREATHING OF VAPORS. USE
NIOSH/MSHA APPROVED SCBA OR AIRMASK FOR LARGE SPILLS IN CONFINED
AREA. WIPE UP OR ABSORB ON SUITABLE MATERIAL & SHOVEL UP. AVOID
CONTACT W/EYES.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:KEEP AWAY FROM HEAT, SPARKS & OPEN
FLAMES. KEEP CNTNR CLOSED WHEN NOT IN USE. DO NOT STORE ABOVE 120F.
Other Precautions:BASED ON PROD FLASH POINT & VAP PRESS, SUITABLE STOR
SHOULD BE PROVIDED I/A/W OSHA REG 1910.106. EMPTY CNTNRS MAY
CONTAIN PROD RESIDUE INCLDG FLAM/EXPLO VAPS. DO NOT CUT,
PUNCTURE/WELD ON/NEAR CNTNR. ALL LABEL WARNINGS MUST BE (SUPP
DATA)
Exposure Controls
Respiratory Protection:WEAR APPROPRIATE, PROPERLY FITTED NIOSH/MSHA
APPRVD RESPIRATOR DURING & AFTER APPLICATION UNLESS AIR MONITORING
VAPOR/ MIST LEVELS ARE BELOW APPLICABLE LIMITS. FOLLOW RESPIRATOR
MFR'S DIRECTIONS FOR R ESPIRATOR USE.
Ventilation:REQUIRED FOR SPRAYING OR IN CONFINED AREA. VENTILATION
EQUIPMENT SHOULD BE EXPLOSION PROOF.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:USUAL CLOTHING FOR PAINTING OPERATIONS.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
EXPLO HAZ:DISPOSED OF IN COMPLIANCE W/ALL APPLICABLE REGULATIONS. OTHER
PREC:OBSERVED UNTIL CONTAINER HAS BEEN CLEANED OR RECONDITIONED.
Chemical Properties
HCC:F4
Boiling Pt:B.P. Text:345F,174C
Vapor Pres:2
Vapor Density:5.5
Spec Gravity:1.16
Evaporation Rate & Reference:0.1 (BUTYL ACETATE = 1).
Solubility in Water:NO
Appearance and Odor:NORMAL FOR A COATINGS PRODUCT.
Percent Volatiles by Volume:56.09
Stability
Stability Indicator/Materials to Avoid:YES
Stability Condition to Avoid:NONE
Hazardous Decomposition Products:NITROGEN OXIDES, CO2, CO, METAL
OXIDES.
Disposal
Waste Disposal Methods:DISPOSE IN CHEMICAL DISPOSAL AREA OR IN A MANNER
THAT COMPLIES W/LOCAL, STATE AND FEDERAL REGULATIONS. DO NOT
INCINERATE CLOSED CONTAINERS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.