BLXHW - VV-P-236B

  • MSDS: BLXHW
  • Manufacturer: OCTAGON PROCESS INC
  • Product Name: VV-P-236B
  • National Stock Number: 9150-01-023-3935
Product Identification

Product ID:VV-P-236B
MSDS Date:07/08/1988
FSC:9150
NIIN:01-023-3935
MSDS Number: BLXHW

Responsible Party
OCTAGON PROCESS INC
596 RIVER ROAD
EDGEWATER, NJ 07020
US

Emergency Phone: 201-945-9400

Info Phone: 201-945-9400

Cage: 82925

Contractor
OCTAGON PROCESS INC.
EDGEWATER, NJ 07020 US

Telephone: 201-945-9400

Cage: 82925

Ingredients

NON HAZARDOUS INGREDIENT

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:NO Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:HEATED MATERIAL MAY CAUSE BURNS TO
SKIN.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:IF HEATED MATERIAL COMES IN CONTACT WITH SKIN,
MAY CAUSE REDNESS & BLISTERING AS WITH A "HOT" OIL.
Medical Cond Aggravated by Exposure:NO DATA AVAILABLE.

First Aid

First Aid:SKIN:FLUSH IMMEDIATELY W/PLENTY OF WATER. IF IRRITATION
PERSISTS, GET MD. EYE:IMMEDIATELY FLUSH W/POTABLE WATER FOR A
MINIMUM OF 15 MINS, SEEK ASSISTANCE FROM MD . INHAL:REMOVE TO FRESH
AIR. SUP PORT BREATHING (GIVE O*2/ARTIFICIAL RESPIRATION) .
INGEST:CALL MD IMMEDIATELY .

Fire Fighting

Flash Point Method:COC
Flash Point:425F,218C
Extinguishing Media:DRY CHEMICAL, CARBON DIOXIDE & CHEMICAL FOAM.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:NONE.

Accidental Release

Spill Release Procedures:CONTAIN SPILL. IF MATERIAL IS STILL SOLID,
SCOOP UP & REUSE IF POSSIBLE. IF MATERIAL IS HEATED, ABSORB ON
OIL-LOVING ABSORBENT & PLACE IN SUITABLE CONTAINERS FOR DISPOSAL.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:STORE IN COOL, DRY PLACE. KEEP AWAY
FROM EXCESSIVE HEAT & OPEN FLAMES AS PRODUCT WILL MELT.
Other Precautions:KEEP CONTAINER CLOSED WHEN NOT IN USE.

Exposure Controls

Respiratory Protection:NOT NEEDED.
Ventilation:NONE SPECIFIED BY MANUFACTURER.
Protective Gloves:RUBBER OR NEOPRENE GLOVES.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:AS NEEDED TO AVOID SKIN CONTACT IF MATERIAL
IS BEING USED HOT.
Work Hygienic Practices:WASH HANDS & FACE AFTER USING. LAUNDER
CONTAMINATED CLOTHING BEFORE REUSE.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

Chemical Properties

Melt/Freeze Pt:M.P/F.P Text:115F,46C
Spec Gravity:0.84 @ 60C
Solubility in Water:INSOLUBLE
Appearance and Odor:YELLOW TO AMBER COLORED SEMI-SOLID HYDROCARBON;
ODORLESS.

Stability

Stability Indicator/Materials to Avoid:YES
NONE SPECIFIED BY MANUFACTURER.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:NONE SPECIFIED BY MANUFACTURER.

Disposal

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE W/LOCAL, STATE &
FEDERAL ENVIRONMENTAL REGULATIONS. DO NOT ALLOW PRODUCT TO ENTER
WATERCOURSES.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.